mirror of
https://github.com/CopterExpress/clover.git
synced 2026-05-28 14:09:33 +00:00
12e292c9d7
* Upload trainer_mode.md Add an English version of the file * Update trainer mode article * Update SUMMARY.md For adding the trainer mode article * Update SUMMARY.md For adding trainer mode article * docs: edit trainer mode articles * docs: move trainer mode article in summary * docs: fix * Update SUMMARY.md Co-authored-by: Oleg Kalachev <okalachev@gmail.com>
35 lines
1.7 KiB
Markdown
35 lines
1.7 KiB
Markdown
# FlySky Trainer mode settings
|
||
|
||
The trainer mode is used for teaching students how to fly a drone. In trainer mode the experienced pilot is ready to take control of the drone in case of emergency situation during the flight.
|
||
|
||
For that we connect two remote controllers. The first controller (Slave) is for a student and the second (Trainer) is for a teacher.
|
||
|
||
## Wire pinout
|
||
|
||
|
||
|
||
To create a link between remote controllers, a connector is used at the back of the case (S-Video). Three contacts in the connector are used for receiving, transmitting information and for ground. The PPM-OUT (transmit) contact must be connected to the PPM-IN (receive) and vice versa. To avoid environmental interference, ground contacts must be interconnected.
|
||
|
||
This is how we need to solder the wires to the connector.
|
||
|
||
|
||
|
||
## Trainer’s settings
|
||
|
||
Go to settings (hold OK button). Then to the System setup and look for (Up / Down) Trainer mode.
|
||
|
||
To activate mode, the Mode line should be ‘ON’. Use the Up/Down buttons to change the parameter. To save the parameter, click OK.
|
||
|
||
Now select the switch for taking the control:
|
||
|
||
Do it in the Trainer mode menu. In the Switch line, select (you can change using Up/Down) any convenient switch (SwA, SwB, SwC, SwD). Trainer now will take control of the drone after toggling the switching.
|
||
|
||
To save the settings hold Cancel.
|
||
|
||
> **Hint** Both teacher’s and student’s remote controllers must be in the same flight mode.
|
||
|
||
## Student’s settings
|
||
|
||
Go to the settings, System setup and select the student mode (Student mode). Then click OK and use Up\Down to select ‘Yes’.
|
||
Hold Cancel to save the settings. If everything is configured correctly, the letter S will appear on the main screen.
|