mirror of
https://github.com/CopterExpress/clover.git
synced 2026-05-30 14:59:31 +00:00
8f78f2b6e4
* docs: Add translations and fix rusian articles * docs: Fix md and style * docs: Fix summary and dupont naming * docs: Fix summary tabbing
95 lines
3.5 KiB
Markdown
95 lines
3.5 KiB
Markdown
# Installing and configuring FPV equipment
|
||
|
||
## Preparing and installing the FPV camera and transmitter
|
||
|
||
1. Install the small mounting deck onto the main frame.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_1.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_2.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
2. Install the camera mount bracket into the corresponding holes.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_3.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_4.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
3. Cut the three-pin supplied camera cable.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_5.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_6.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
4. Tin the wires
|
||
|
||
<img src="../assets/fpv/fpv_7.png" width=300 class="zoom border center">
|
||
|
||
5. Solder the JST-male connector to the power wires of the camera.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_8.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_9.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
> **Hint** Сheck what you are wearing shrink tubes before soldering the wires.
|
||
|
||
6. Solder the JST male connector to the transmitter.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_10.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_11.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
7. Solder the yellow camera signal cable to the transmitter.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_12.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_13.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
8. Connect the antenna to the transmitter.
|
||
|
||
<img src="../assets/fpv/fpv_14.png" width=300 class="zoom border center">
|
||
|
||
> **Caution** If voltage is applied to a transmitter without an antenna, there is a high probability that it will burn out.
|
||
|
||
9. Place the receiver onto the mounting deck, securing it with ties.
|
||
|
||
<img src="../assets/fpv/fpv_15.png" width=300 class="zoom border center">
|
||
|
||
10. Place the mounting deck with the receiver on the bottom of the aircraft.
|
||
|
||
<img src="../assets/fpv/fpv_16.png" width=300 class="zoom border center">
|
||
|
||
11. Place the camera in the bracket and secure it with the 4 attached bolts. The camera should be at an angle of 15°-20° relative to the plane of the aircraft.
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_17.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_18.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
<div class="image-group">
|
||
<img src="../assets/fpv/fpv_19.png" width=300 class="zoom border">
|
||
<img src="../assets/fpv/fpv_20.png" width=300 class="zoom border">
|
||
</div>
|
||
|
||
12. Connect the signal cable to the camera.
|
||
|
||
<img src="../assets/fpv/fpv_21.png" width=300 class="zoom border center">
|
||
|
||
13. Connect the camera's power cable to the power JST soldered to the *BAT+* and *GND* pads on the power distribution board.
|
||
|
||
14. Connect the transmitter power cable to JST at 5V.
|
||
|
||
<img src="../assets/fpv/fpv_22.png" width=300 class="zoom border center">
|
||
|
||
## Setting up and connecting FPV goggles
|
||
|
||
1. Install the two supplied antennas on the glasses.
|
||
2. Turn on the glasses by holding the power button for 3-4 seconds.
|
||
3. Turn on the aircraft and make sure the transmitter LED is blue.
|
||
4. Press the *Auto Search* button on the glasses to automatically search for an available radio channel.
|