refactor(i18n): consolidate i18n logic into pkg/i18n, fix TOML loading issue, and migrate translation files

(cherry picked from commit bfccbf60e4)

.claude/commands/opsx/apply.md

@@ -0,0 +1,152 @@
+---
+name: "OPSX: Apply"
+description: Implement tasks from an OpenSpec change (Experimental)
+category: Workflow
+tags: [workflow, artifacts, experimental]
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue`
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/opsx:archive`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.claude/commands/opsx/archive.md

@@ -0,0 +1,157 @@
+---
+name: "OPSX: Archive"
+description: Archive a completed change in the experimental workflow
+category: Workflow
+tags: [workflow, archive, experimental]
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name after `/opsx:archive` (e.g., `/opsx:archive add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Spec sync status (synced / sync skipped / no delta specs)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success (No Delta Specs)**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** No delta specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success With Warnings**
+
+```
+## Archive Complete (with warnings)
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** Sync skipped (user chose to skip)
+
+**Warnings:**
+- Archived with 2 incomplete artifacts
+- Archived with 3 incomplete tasks
+- Delta spec sync was skipped (user chose to skip)
+
+Review the archive if this was not intentional.
+```
+
+**Output On Error (Archive Exists)**
+
+```
+## Archive Failed
+
+**Change:** <change-name>
+**Target:** openspec/changes/archive/YYYY-MM-DD-<name>/
+
+Target archive directory already exists.
+
+**Options:**
+1. Rename the existing archive
+2. Delete the existing archive if it's a duplicate
+3. Wait until a different date to archive
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use the Skill tool to invoke `openspec-sync-specs` (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.claude/commands/opsx/explore.md

@@ -0,0 +1,173 @@
+---
+name: "OPSX: Explore"
+description: "Enter explore mode - think through ideas, investigate problems, clarify requirements"
+category: Workflow
+tags: [workflow, explore, experimental, thinking]
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Input**: The argument after `/opsx:explore` is whatever the user wants to think about. Could be:
+- A vague idea: "real-time collaboration"
+- A specific problem: "the auth system is getting unwieldy"
+- A change name: "add-dark-mode" (to explore in context of that change)
+- A comparison: "postgres vs sqlite for this"
+- Nothing (just enter explore mode)
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+If the user mentioned a specific change name, read its artifacts for context.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Read existing artifacts for context**
+   - `openspec/changes/<name>/proposal.md`
+   - `openspec/changes/<name>/design.md`
+   - `openspec/changes/<name>/tasks.md`
+   - etc.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+    | Insight Type               | Where to Capture               |
+    |----------------------------|--------------------------------|
+    | New requirement discovered | `specs/<capability>/spec.md` |
+    | Requirement changed        | `specs/<capability>/spec.md` |
+    | Design decision made       | `design.md`                  |
+    | Scope changed              | `proposal.md`                |
+    | New work identified        | `tasks.md`                   |
+    | Assumption invalidated     | Relevant artifact              |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When things crystallize, you might offer a summary - but it's optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.claude/commands/opsx/propose.md

@@ -0,0 +1,106 @@
+---
+name: "OPSX: Propose"
+description: Propose a new change - create it and generate all artifacts in one step
+category: Workflow
+tags: [workflow, artifacts, experimental]
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+I'll create a change with artifacts:
+- proposal.md (what & why)
+- design.md (how)
+- tasks.md (implementation steps)
+
+When ready to implement, run /opsx:apply
+
+---
+
+**Input**: The argument after `/opsx:propose` is the change name (kebab-case), OR a description of what the user wants to build.
+
+**Steps**
+
+1. **If no input provided, ask what they want to build**
+
+   Use the **AskUserQuestion tool** (open-ended, no preset options) to ask:
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+2. **Create the change directory**
+   ```bash
+   openspec new change "<name>"
+   ```
+   This creates a scaffolded change at `openspec/changes/<name>/` with `.openspec.yaml`.
+
+3. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts with their status and dependencies
+
+4. **Create artifacts in sequence until apply-ready**
+
+   Use the **TodoWrite tool** to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `outputPath`: Where to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context
+      - Create the artifact file using `template` as the structure
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until all `applyRequires` artifacts are complete**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - Check if every artifact ID in `applyRequires` has `status: "done"` in the artifacts array
+      - Stop when all `applyRequires` artifacts are done
+
+   c. **If an artifact requires user input** (unclear context):
+      - Use **AskUserQuestion tool** to clarify
+      - Then continue with creation
+
+5. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions
+- What's ready: "All artifacts created! Ready for implementation."
+- Prompt: "Run `/opsx:apply` to start implementing."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- Create ALL artifacts needed for implementation (as defined by schema's `apply.requires`)
+- Always read dependency artifacts before creating a new one
+- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.claude/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,156 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using openspec-continue-change
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! Ready to archive this change.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.claude/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,114 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs (or "No delta specs" or "Sync skipped")
+
+All artifacts complete. All tasks complete.
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use openspec-sync-specs approach (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.claude/skills/openspec-explore/SKILL.md

@@ -0,0 +1,288 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Read existing artifacts for context**
+   - `openspec/changes/<name>/proposal.md`
+   - `openspec/changes/<name>/design.md`
+   - `openspec/changes/<name>/tasks.md`
+   - etc.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+    | Insight Type               | Where to Capture               |
+    |----------------------------|--------------------------------|
+    | New requirement discovered | `specs/<capability>/spec.md` |
+    | Requirement changed        | `specs/<capability>/spec.md` |
+    | Design decision made       | `design.md`                  |
+    | Scope changed              | `proposal.md`                |
+    | New work identified        | `tasks.md`                   |
+    | Assumption invalidated     | Relevant artifact              |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: /opsx:explore add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │          CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.claude/skills/openspec-propose/SKILL.md

@@ -0,0 +1,110 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+I'll create a change with artifacts:
+- proposal.md (what & why)
+- design.md (how)
+- tasks.md (implementation steps)
+
+When ready to implement, run /opsx:apply
+
+---
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **If no clear input provided, ask what they want to build**
+
+   Use the **AskUserQuestion tool** (open-ended, no preset options) to ask:
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+2. **Create the change directory**
+   ```bash
+   openspec new change "<name>"
+   ```
+   This creates a scaffolded change at `openspec/changes/<name>/` with `.openspec.yaml`.
+
+3. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts with their status and dependencies
+
+4. **Create artifacts in sequence until apply-ready**
+
+   Use the **TodoWrite tool** to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `outputPath`: Where to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context
+      - Create the artifact file using `template` as the structure
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until all `applyRequires` artifacts are complete**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - Check if every artifact ID in `applyRequires` has `status: "done"` in the artifacts array
+      - Stop when all `applyRequires` artifacts are done
+
+   c. **If an artifact requires user input** (unclear context):
+      - Use **AskUserQuestion tool** to clarify
+      - Then continue with creation
+
+5. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions
+- What's ready: "All artifacts created! Ready for implementation."
+- Prompt: "Run `/opsx:apply` or ask me to implement to start working on the tasks."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- Create ALL artifacts needed for implementation (as defined by schema's `apply.requires`)
+- Always read dependency artifacts before creating a new one
+- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.codex/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,156 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using openspec-continue-change
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! Ready to archive this change.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.codex/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,114 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs (or "No delta specs" or "Sync skipped")
+
+All artifacts complete. All tasks complete.
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use openspec-sync-specs approach (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.codex/skills/openspec-explore/SKILL.md

@@ -0,0 +1,288 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│      ┌────────┐         ┌────────┐      │
+│      │ State  │────────▶│ State  │      │
+│      │   A    │         │   B    │      │
+│      └────────┘         └────────┘      │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Read existing artifacts for context**
+   - `openspec/changes/<name>/proposal.md`
+   - `openspec/changes/<name>/design.md`
+   - `openspec/changes/<name>/tasks.md`
+   - etc.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+    | Insight Type               | Where to Capture               |
+    |----------------------------|--------------------------------|
+    | New requirement discovered | `specs/<capability>/spec.md` |
+    | Requirement changed        | `specs/<capability>/spec.md` |
+    | Design decision made       | `design.md`                  |
+    | Scope changed              | `proposal.md`                |
+    | New work identified        | `tasks.md`                   |
+    | Assumption invalidated     | Relevant artifact              |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: /opsx:explore add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │          CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.codex/skills/openspec-propose/SKILL.md

@@ -0,0 +1,110 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.3.1"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+I'll create a change with artifacts:
+- proposal.md (what & why)
+- design.md (how)
+- tasks.md (implementation steps)
+
+When ready to implement, run /opsx:apply
+
+---
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **If no clear input provided, ask what they want to build**
+
+   Use the **AskUserQuestion tool** (open-ended, no preset options) to ask:
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+2. **Create the change directory**
+   ```bash
+   openspec new change "<name>"
+   ```
+   This creates a scaffolded change at `openspec/changes/<name>/` with `.openspec.yaml`.
+
+3. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts with their status and dependencies
+
+4. **Create artifacts in sequence until apply-ready**
+
+   Use the **TodoWrite tool** to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `outputPath`: Where to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context
+      - Create the artifact file using `template` as the structure
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until all `applyRequires` artifacts are complete**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - Check if every artifact ID in `applyRequires` has `status: "done"` in the artifacts array
+      - Stop when all `applyRequires` artifacts are done
+
+   c. **If an artifact requires user input** (unclear context):
+      - Use **AskUserQuestion tool** to clarify
+      - Then continue with creation
+
+5. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions
+- What's ready: "All artifacts created! Ready for implementation."
+- Prompt: "Run `/opsx:apply` or ask me to implement to start working on the tasks."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- Create ALL artifacts needed for implementation (as defined by schema's `apply.requires`)
+- Always read dependency artifacts before creating a new one
+- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.env.example

@@ -1,17 +0,0 @@
-# 你的下载secret，每一次下载次数减1的时候都会根据这里的secret生成一个下载jwt token， 有效期一小时，使用该下载token有效期内可以多线程下载该文件而不会被多次扣除次数
-DOWNLOAD_SECRET="your-secret-token"
-PASSWORD_SALT="your-passwall-salt" # 设置密码时会把密码加盐
-
-UPLOAD_PATH="/upload" # 上传路径
-REDIS_URL="redis://redis:6379/0" # redis 地址
-NODE_ENV="production" # 指定系统环境 production 或者 dev
-MAX_LOCALSTORAGE_SIZE="100GB" # 指定实例最大上传容量，支持填写人类可读的值，比如1TB，500GB等
-
-# (可选): 系统状态页面显示站长信息的 头像会使用email的gravatar头像，点击是触发mailto:your-email，不填写不显示站长信息
-ADMIN_EMAIL="keven@fudaoyuan.icu" 
-ADMIN_NAME="keven"
-
-# 下面的env是前端渲染用到的，SITE_URL必填，对应你的公网域名
-SITE_TITLE="015" 
-SITE_DESC="015 是一个开源的临时内容分享平台项目, 支持文件和文本上传, 下载, 分享" 
-SITE_URL="http://localhost:5000"

.gitea/workflows/build.yaml

@@ -0,0 +1,31 @@
+name: Build
+
+on:
+  pull_request:
+
+jobs:
+  build-test:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v6
+      - uses: docker/setup-buildx-action@v3
+      - name: Set build time
+        id: build-time
+        run: echo "time=$(date +%s)" >> $GITHUB_OUTPUT
+      - name: build-app
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: false
+          tags: 015-app:test
+          build-args: |
+            VERSION=${{ gitea.ref_name || github.ref_name }}
+            BUILD_TIME=${{ steps.build-time.outputs.time }}
+      - name: build-worker
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./worker/Dockerfile
+          push: false
+          tags: 015-worker:test

.gitea/workflows/lint.yaml

@@ -0,0 +1,47 @@
+name: Lint
+
+on:
+    push:
+
+jobs:
+    lint-front:
+        runs-on: ubuntu-latest
+        steps:
+            - uses: actions/checkout@v6
+            - uses: actions/setup-node@v6
+              with:
+                  node-version: '24'
+            - uses: pnpm/action-setup@v4
+              with:
+                cache: true
+            - name: Install dependencies
+              run: |
+                pnpm install --frozen-lockfile
+            - name: Run frontend lint
+              run: pnpm lint:front
+
+    lint-backend:
+        runs-on: ubuntu-latest
+        steps:
+            - uses: actions/checkout@v6
+            - uses: actions/setup-go@v6
+              with:
+                  go-version-file: 'go.work'
+            - name: Run golangci-lint
+              uses: golangci/golangci-lint-action@v9
+              with:
+                  skip-cache: true
+                  working-directory: backend
+
+    lint-worker:
+        runs-on: ubuntu-latest
+        steps:
+            - uses: actions/checkout@v6
+            - uses: actions/setup-go@v6
+              with:
+                  go-version-file: 'go.work'
+            - name: Run golangci-lint
+              uses: golangci/golangci-lint-action@v9
+              with:
+                  skip-cache: true
+                  working-directory: worker

.gitea/workflows/publish.yaml

@@ -0,0 +1,87 @@
+name: Publish
+
+on:
+    push:
+        tags:
+            - '*'
+
+jobs:
+    build-app:
+        runs-on: ubuntu-latest
+        steps:
+            - uses: actions/checkout@v6
+            - uses: docker/setup-qemu-action@v3
+            - uses: docker/setup-buildx-action@v3
+            - uses: docker/login-action@v3
+              with:
+                  username: fudaoyuanicu
+                  password: ${{ secrets.DOCKER_PASSWORD }}
+            - uses: docker/metadata-action@v5
+              id: meta
+              with:
+                  images: fudaoyuanicu/015-app
+                  tags: |
+                      type=semver,pattern={{version}}
+                      type=raw,value=edge,enable=${{ contains(github.ref_name, '-') }}
+                      type=raw,value=latest,enable=${{ !contains(github.ref_name, '-') }}
+            - name: Set build time
+              id: build-time
+              run: |
+                  echo "time=$(date +%s)" >> $GITHUB_OUTPUT
+              shell: bash
+            - name: build-app
+              uses: docker/build-push-action@v5
+              with:
+                  context: .
+                  file: ./Dockerfile
+                  platforms: linux/amd64,linux/arm64
+                  push: true
+                  tags: ${{ steps.meta.outputs.tags }}
+                  labels: ${{ steps.meta.outputs.labels }}
+                  build-args: |
+                      VERSION=${{ gitea.ref_name || github.ref_name }}
+                      BUILD_TIME=${{ steps.build-time.outputs.time }}
+
+    build-worker:
+        runs-on: ubuntu-latest
+        steps:
+            - uses: actions/checkout@v6
+            - uses: docker/setup-qemu-action@v3
+            - uses: docker/setup-buildx-action@v3
+            - uses: docker/login-action@v3
+              with:
+                  username: fudaoyuanicu
+                  password: ${{ secrets.DOCKER_PASSWORD }}
+            - uses: docker/metadata-action@v5
+              id: meta
+              with:
+                  images: fudaoyuanicu/015-worker
+                  tags: |
+                      type=semver,pattern={{version}}
+                      type=raw,value=edge,enable=${{ contains(github.ref_name, '-') }}
+                      type=raw,value=latest,enable=${{ !contains(github.ref_name, '-') }}
+            - name: Set build time
+              id: build-time
+              run: |
+                  echo "time=$(date +%s)" >> $GITHUB_OUTPUT
+              shell: bash
+            - name: build-worker
+              uses: docker/build-push-action@v5
+              with:
+                  context: .
+                  file: ./worker/Dockerfile
+                  platforms: linux/amd64,linux/arm64
+                  push: true
+                  tags: ${{ steps.meta.outputs.tags }}
+                  labels: ${{ steps.meta.outputs.labels }}
+
+    deploy:
+        runs-on: ubuntu-latest
+        needs: [build-app, build-worker]
+        if: ${{ !contains(github.ref_name, '-') }}
+        steps:
+            - name: Send deployment webhook
+              run: |
+                  curl -X POST http://192.168.100.5:8364/v1/update \
+                    -H "Content-Type: application/json" \
+                    -H "Authorization: Bearer helloworld"

.gitignore

@@ -22,6 +22,7 @@ logs
 .env
 .env.*
 !.env.example
+/config.yaml
 
 # Serwist
 /front/public/sw*
@@ -30,3 +31,6 @@ logs
 # backend
 **/uploads/**
 **/tmp/**
+
+# worker
+pkg/mail/out/

.vscode/launch.json

@@ -0,0 +1,16 @@
+{
+    // 使用 IntelliSense 了解相关属性。
+    // 悬停以查看现有属性的描述。
+    // 欲了解更多信息，请访问: https://go.microsoft.com/fwlink/?linkid=830387
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "name": "Launch Backend",
+            "type": "go",
+            "request": "launch",
+            "mode": "auto",
+            "program": "${workspaceFolder}/backend",
+            "cwd": "${workspaceFolder}"
+        }
+    ]
+}

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "i18n-ally.localesPaths": ["front/i18n/locales"],
+    "i18n-ally.enabledFrameworks": ["vue"],
+    "i18n-ally.keystyle": "nested"
+}

Dockerfile

@@ -1,34 +1,31 @@
 FROM node:22-alpine AS front-base
+WORKDIR /app
 
 # Install dependencies only when needed
-FROM front-base AS front-deps
-RUN apk add --no-cache gcompat
-WORKDIR /app
-COPY . .
-RUN corepack enable pnpm && pnpm i && pnpm --filter=015-front deploy dist
-
-
 FROM front-base AS front-builder
-WORKDIR /app
-COPY --from=front-deps /app/dist/ .
-RUN corepack enable pnpm && pnpm build
+RUN apk add --no-cache gcompat
+ENV CI=true
+COPY . .
+RUN corepack enable pnpm && pnpm i && pnpm --filter=015-front build && pnpm --dir pkg/mail export
 
-FROM golang:1.24.3 AS backend-builder
+FROM golang:1.26.3 AS backend-builder
 WORKDIR /app
-# Download Go modules
-COPY backend/go.mod backend/go.sum ./
-RUN go env -w GO111MODULE=on && go env -w GOPROXY=https://goproxy.cn,direct && go mod download
-# Copy the source code. Note the slash at the end, as explained in
-# https://docs.docker.com/engine/reference/builder/#copy
-COPY backend/ .
-# Build
-RUN CGO_ENABLED=0 GOOS=linux go build -o backend
+# Workspace and module manifests for cache
+COPY go.work go.work.sum ./
+COPY backend/ ./backend/
+COPY worker/ ./worker/
+COPY pkg/ ./pkg/
+# Inject built email templates so Go can embed them
+COPY --from=front-builder /app/pkg/mail/out/ ./pkg/mail/out/
+RUN go env -w GO111MODULE=on && go env -w GOPROXY=https://goproxy.cn,direct && \
+    go mod download
+# Build from workspace root so pkg/utils, pkg/models, pkg/services resolve
+RUN CGO_ENABLED=0 GOOS=linux go build -o backend-bin ./backend
 
 
 FROM front-base AS runner
 ARG VERSION
 ARG BUILD_TIME
-WORKDIR /app
 RUN apk add --no-cache curl openssl
 ENV NODE_ENV production
 
@@ -36,14 +33,12 @@ RUN addgroup --system --gid 1001 nodejs
 RUN adduser --system --uid 1001 nuxtjs
 
 # Only `.output` folder is needed from the build stage
-COPY --from=front-builder --chown=nuxtjs:nodejs /app/.output/ ./
-COPY --from=backend-builder /app/backend /bin/backend
+COPY --from=front-builder --chown=nuxtjs:nodejs /app/front/.output/ ./
+COPY --from=backend-builder /app/backend-bin /bin/backend
 COPY 015.sh /app/015.sh
 
 # Change the port and host
 ENV PORT=80 HOST=0.0.0.0
-ENV SITE_URL="http://localhost"
-ENV UPLOAD_PATH="/uploads"
 ENV VERSION=${VERSION}
 ENV BUILD_TIME=${BUILD_TIME}
 

LICENSE

@@ -0,0 +1,235 @@
+GNU AFFERO GENERAL PUBLIC LICENSE
+Version 3, 19 November 2007
+
+Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+
+Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
+
+                            Preamble
+
+The GNU Affero General Public License is a free, copyleft license for software and other kinds of works, specifically designed to ensure cooperation with the community in the case of network server software.
+
+The licenses for most software and other practical works are designed to take away your freedom to share and change the works.  By contrast, our General Public Licenses are intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users.
+
+When we speak of free software, we are referring to freedom, not price.  Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.
+
+Developers that use our General Public Licenses protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License which gives you legal permission to copy, distribute and/or modify the software.
+
+A secondary benefit of defending all users' freedom is that improvements made in alternate versions of the program, if they receive widespread use, become available for other developers to incorporate.  Many developers of free software are heartened and encouraged by the resulting cooperation.  However, in the case of software used on network servers, this result may fail to come about. The GNU General Public License permits making a modified version and letting the public access it on a server without ever releasing its source code to the public.
+
+The GNU Affero General Public License is designed specifically to ensure that, in such cases, the modified source code becomes available to the community.  It requires the operator of a network server to provide the source code of the modified version running there to the users of that server.  Therefore, public use of a modified version, on a publicly accessible server, gives the public access to the source code of the modified version.
+
+An older license, called the Affero General Public License and published by Affero, was designed to accomplish similar goals.  This is a different license, not a version of the Affero GPL, but Affero has released a new version of the Affero GPL which permits relicensing under this license.
+
+The precise terms and conditions for copying, distribution and modification follow.
+
+                       TERMS AND CONDITIONS
+
+0. Definitions.
+
+"This License" refers to version 3 of the GNU Affero General Public License.
+
+"Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
+
+"The Program" refers to any copyrightable work licensed under this License.  Each licensee is addressed as "you".  "Licensees" and "recipients" may be individuals or organizations.
+
+To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy.  The resulting work is called a "modified version" of the earlier work or a work "based on" the earlier work.
+
+A "covered work" means either the unmodified Program or a work based on the Program.
+
+To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy.  Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
+
+To "convey" a work means any kind of propagation that enables other parties to make or receive copies.  Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
+
+An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License.  If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
+
+1. Source Code.
+The "source code" for a work means the preferred form of the work for making modifications to it.  "Object code" means any non-source form of a work.
+
+A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
+
+The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form.  A "Major Component", in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.
+
+The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities.  However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work.  For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.
+
+The Corresponding Source for a work in source code form is that same work.
+
+2. Basic Permissions.
+All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met.  This License explicitly affirms your unlimited permission to run the unmodified Program.  The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.  This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
+
+You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force.  You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright.  Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.
+
+Conveying under any other circumstances is permitted solely under the conditions stated below.  Sublicensing is not allowed; section 10 makes it unnecessary.
+
+3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
+
+When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures.
+
+4. Conveying Verbatim Copies.
+You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.
+
+You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
+
+5. Conveying Modified Source Versions.
+You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7.  This requirement modifies the requirement in section 4 to "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy.  This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged.  This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
+
+A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit.  Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.
+
+6. Conveying Non-Source Forms.
+You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source.  This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.
+
+    d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge.  You need not require recipients to copy the Corresponding Source along with the object code.  If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source.  Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d.
+
+A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
+
+A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling.  In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage.  For a particular product received by a particular user, "normally used" refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product.  A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.
+
+"Installation Information" for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source.  The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.
+
+If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information.  But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM).
+
+The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed.  Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
+
+Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
+
+7. Additional Terms.
+"Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.  If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.
+
+When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it.  (Additional permissions may be written to require their own removal in certain cases when you modify the work.)  You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
+
+Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.
+
+All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10.  If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term.  If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.
+
+If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms.
+
+Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.
+
+8. Termination.
+
+You may not propagate or modify a covered work except as expressly provided under this License.  Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
+
+However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
+
+Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License.  If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.
+
+9. Acceptance Not Required for Having Copies.
+
+You are not required to accept this License in order to receive or run a copy of the Program.  Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance.  However, nothing other than this License grants you permission to propagate or modify any covered work.  These actions infringe copyright if you do not accept this License.  Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.
+
+10. Automatic Licensing of Downstream Recipients.
+
+Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License.  You are not responsible for enforcing compliance by third parties with this License.
+
+An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.  If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
+
+You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License.  For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
+
+11. Patents.
+
+A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based.  The work thus licensed is called the contributor's "contributor version".
+
+A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version.  For purposes of this definition, "control" includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.
+
+Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
+
+In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement).  To "grant" such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.
+
+If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid.
+
+If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
+
+A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License.  You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
+
+Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.
+
+12. No Surrender of Others' Freedom.
+
+If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.  If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.
+
+13. Remote Network Interaction; Use with the GNU General Public License.
+
+Notwithstanding any other provision of this License, if you modify the Program, your modified version must prominently offer all users interacting with it remotely through a computer network (if your version supports such interaction) an opportunity to receive the Corresponding Source of your version by providing access to the Corresponding Source from a network server at no charge, through some standard or customary means of facilitating copying of software.  This Corresponding Source shall include the Corresponding Source for any work covered by version 3 of the GNU General Public License that is incorporated pursuant to the following paragraph.
+
+Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU General Public License into a single combined work, and to convey the resulting work.  The terms of this License will continue to apply to the part which is the covered work, but the work with which it is combined will remain governed by version 3 of the GNU General Public License.
+
+14. Revised Versions of this License.
+
+The Free Software Foundation may publish revised and/or new versions of the GNU Affero General Public License from time to time.  Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program specifies that a certain numbered version of the GNU Affero General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation.  If the Program does not specify a version number of the GNU Affero General Public License, you may choose any version ever published by the Free Software Foundation.
+
+If the Program specifies that a proxy can decide which future versions of the GNU Affero General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
+
+Later license versions may give you additional or different permissions.  However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.
+
+15. Disclaimer of Warranty.
+
+THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+16. Limitation of Liability.
+
+IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+17. Interpretation of Sections 15 and 16.
+
+If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
+
+END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
+
+To do so, attach the following notices to the program.  It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
+
+     interview
+     Copyright (C) 2025  keven
+
+     This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
+
+     This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Affero General Public License for more details.
+
+     You should have received a copy of the GNU Affero General Public License along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If your software can interact with users remotely through a computer network, you should also make sure that it provides a way for users to get its source.  For example, if your program is a web application, its interface could display a "Source" link that leads users to an archive of the code.  There are many ways you could offer source, and different solutions will be better for different programs; see section 13 for the specific requirements.
+
+You should also get your employer (if you work as a programmer) or school, if any, to sign a "copyright disclaimer" for the program, if necessary. For more information on this, and how to apply and follow the GNU AGPL, see <http://www.gnu.org/licenses/>.

README-zh.md

@@ -39,25 +39,37 @@
 📷 **图片处理** - 图片压缩、格式转换等处理功能  
 🏷️ **下载控制** - 基于 JWT 的下载令牌管理系统
 
-## 截图
+## 📸 截图预览
 
-选择文件上传页面
-![](/.github/image/1.png)
+| 选择文件上传页面          | 输入文本上传页面          |
+| ------------------------- | ------------------------- |
+| ![](/.github/image/1.png) | ![](/.github/image/2.png) |
 
-输入文本上传页面
-![](/.github/image/2.png)
+| 多选文件上传              | 文件上传进度热力图        |
+| ------------------------- | ------------------------- |
+| ![](/.github/image/3.png) | ![](/.github/image/4.png) |
 
-选择文件上传页面 - 支持多选文件上传
-![](/.github/image/3.png)
+| 文件上传进度条            | 文件上传成功页面          |
+| ------------------------- | ------------------------- |
+| ![](/.github/image/5.png) | ![](/.github/image/6.png) |
 
-文件正在上传页面 - 类似Github的展示上传进度的文件热力图
-![](/.github/image/4.png)
+## 🚀 快速开始
 
-文件正在上传页面 - 类似 QbitTorrent 的展示文件上传进度的进度条
-![](/.github/image/5.png)
+### Docker
 
-文件上传成功页面
-![](/.github/image/6.png)
+1. 下载文件
+    - config.example.yaml
+    - docker-compose.yml
+
+2. 把 config.example.yaml 配置完成后改为 config.yaml
+
+3. 启动
+
+```bash
+docker compose up -d
+```
+
+4. 访问 `http://localhost:8080`
 
 ## 🏗️ 技术架构
 
@@ -96,70 +108,21 @@
 - **Redis 缓存** - 分享信息、文件元数据缓存
 - **队列系统** - 异步任务处理队列
 
-## 🚀 快速开始
-
-### 环境要求
-
-- Node.js 18+
-- Go 1.23+
-- Redis 6+
-- pnpm 9+
-
-### 安装依赖
-
-```bash
-# 安装根目录依赖
-pnpm install
-
-# 安装前端依赖
-cd front && pnpm install
-
-# 安装后端依赖
-cd backend && go mod download
-
-# 安装 Worker 依赖
-cd worker && go mod download
-```
-
-### 环境配置
-
-```bash
-# 复制环境变量文件
-cp .env.example .env
-
-# 配置必要的环境变量
-REDIS_URL=redis://localhost:6379
-UPLOAD_PATH=/.github/uploads
-download_secret=your_download_secret
-```
-
-### 启动服务
-
-```bash
-# 开发模式启动所有服务
-pnpm run dev
-
-# 或分别启动
-pnpm run dev:front    # 前端服务 (端口 5000)
-pnpm run dev:backend  # 后端服务 (端口 1323)
-pnpm run dev:worker   # Worker 服务
-```
-
 ## 📁 项目结构
 
 ```
 015/
 ├── front/                 # 前端应用 (Vue 3 + Nuxt 3)
 │   ├── components/       # Vue 组件
-│   │   ├── pages/           # 页面路由
-│   │   ├── composables/     # 组合式函数
-│   │   ├── i18n/           # 国际化文件
-│   │   └── assets/         # 静态资源
-│   └── middleware/     # 中间件
+│   ├── pages/            # 页面路由
+│   ├── composables/      # 组合式函数
+│   ├── i18n/             # 国际化文件
+│   ├── assets/           # 静态资源
+│   ├── plugins/          # Nuxt 插件
+│   └── server/           # 服务端路由
 ├── backend/             # 后端服务 (Go + Echo)
 │   ├── internal/       # 内部包
 │   │   ├── controllers/ # 控制器
-│   │   ├── models/     # 数据模型
 │   │   ├── services/   # 业务逻辑
 │   │   └── utils/      # 工具函数
 │   └── middleware/     # 中间件
@@ -168,7 +131,7 @@ pnpm run dev:worker   # Worker 服务
 │   │   ├── tasks/      # 任务处理器
 │   │   └── utils/      # 工具函数
 │   └── middleware/     # 中间件
-└── tmp/               # 临时文件
+└── pkg/               # 公共包
 ```
 
 ## 🔧 开发指南
@@ -207,19 +170,19 @@ cd worker && go build -o worker .
 - 前端计算哈希和秒传
 - 并发切片上传 (使用 Web Worker)
 - 文件上传/文本上传和分享
+- 支持多文件上传
 - 上传统计页面
 - 多语言支持
 - 最大上传限制
 - 后端队列系统和 Worker 处理文件
+- 断点续传 (后端计算已上传部分并返回)
+- 图片格式转换和压缩
 
 ### 计划功能 🚧
 
-- 断点续传 (后端计算已上传部分并返回)
-- 图片格式转换和压缩
 - 图片 OCR 复制
 - 文档转 Markdown
 - 文本翻译/总结
-- 支持上传多文件
 
 ## 🤝 贡献指南
 

README.md

@@ -41,23 +41,34 @@ English | [中文](README-zh.md)
 
 ## 📸 Screenshots
 
-File selection upload page
-![](/.github/image/1.png)
+| File Selection Upload Page | Text Input Upload Page    |
+| -------------------------- | ------------------------- |
+| ![](/.github/image/1.png)  | ![](/.github/image/2.png) |
 
-Text input upload page
-![](/.github/image/2.png)
+| Multiple File Upload       | Upload Progress Heatmap   |
+| -------------------------- | ------------------------- |
+| ![](/.github/image/3.png)  | ![](/.github/image/4.png) |
 
-File selection upload page - supports multiple file uploads
-![](/.github/image/3.png)
+| Upload Progress Bar        | Upload Success Page       |
+| -------------------------- | ------------------------- |
+| ![](/.github/image/5.png)  | ![](/.github/image/6.png) |
 
-File uploading page - similar to GitHub's file heatmap showing upload progress
-![](/.github/image/4.png)
+## 🚀 Quick Start
 
-File uploading page - similar to qBittorrent's progress bar showing file upload progress
-![](/.github/image/5.png)
+### Docker
 
-File upload success page
-![](/.github/image/6.png)
+1. Download files
+   - config.example.yaml
+   - docker-compose.yml
+
+2. Rename config.example.yaml to config.yaml after configuration
+
+3. Start
+```bash
+docker compose up -d
+```
+
+4. Visit `http://localhost:8080`
 
 ## 🏗️ Technical Architecture
 
@@ -96,70 +107,21 @@ File upload success page
 - **Redis Cache** - Share information and file metadata caching
 - **Queue System** - Asynchronous task processing queue
 
-## 🚀 Quick Start
-
-### Requirements
-
-- Node.js 18+
-- Go 1.23+
-- Redis 6+
-- pnpm 9+
-
-### Install Dependencies
-
-```bash
-# Install root dependencies
-pnpm install
-
-# Install frontend dependencies
-cd front && pnpm install
-
-# Install backend dependencies
-cd backend && go mod download
-
-# Install Worker dependencies
-cd worker && go mod download
-```
-
-### Environment Configuration
-
-```bash
-# Copy environment variables file
-cp .env.example .env
-
-# Configure necessary environment variables
-REDIS_URL=redis://localhost:6379
-UPLOAD_PATH=/.github/uploads
-download_secret=your_download_secret
-```
-
-### Start Services
-
-```bash
-# Start all services in development mode
-pnpm run dev
-
-# Or start separately
-pnpm run dev:front    # Frontend service (port 5000)
-pnpm run dev:backend  # Backend service (port 1323)
-pnpm run dev:worker   # Worker service
-```
-
 ## 📁 Project Structure
 
 ```
 015/
 ├── front/                 # Frontend application (Vue 3 + Nuxt 3)
 │   ├── components/       # Vue components
-│   │   ├── pages/           # Page routes
-│   │   ├── composables/     # Composable functions
-│   │   ├── i18n/           # Internationalization files
-│   │   └── assets/         # Static assets
-│   └── middleware/     # Middleware
+│   ├── pages/            # Page routes
+│   ├── composables/      # Composable functions
+│   ├── i18n/             # Internationalization files
+│   ├── assets/           # Static assets
+│   ├── plugins/          # Nuxt plugins
+│   └── server/           # Server-side routes
 ├── backend/             # Backend service (Go + Echo)
 │   ├── internal/       # Internal packages
 │   │   ├── controllers/ # Controllers
-│   │   ├── models/     # Data models
 │   │   ├── services/   # Business logic
 │   │   └── utils/      # Utility functions
 │   └── middleware/     # Middleware
@@ -168,7 +130,7 @@ pnpm run dev:worker   # Worker service
 │   │   ├── tasks/      # Task processors
 │   │   └── utils/      # Utility functions
 │   └── middleware/     # Middleware
-└── tmp/               # Temporary files
+└── pkg/               # Shared packages
 ```
 
 ## 🔧 Development Guide
@@ -207,19 +169,19 @@ cd worker && go build -o worker .
 - Frontend hash calculation and instant transfer
 - Concurrent chunked upload (using Web Worker)
 - File upload/text upload and sharing
+- Multiple file upload support
 - Upload statistics page
 - Multi-language support
 - Maximum upload limits
 - Backend queue system and Worker file processing
+- Resume upload (backend calculates uploaded parts and returns)
+- Image format conversion and compression
 
 ### Planned Features 🚧
 
-- Resume upload (backend calculates uploaded parts and returns)
-- Image format conversion and compression
 - Image OCR copy
 - Document to Markdown conversion
 - Text translation/summarization
-- Support for multiple file uploads
 
 ## 🤝 Contributing
 

backend/.air.toml

@@ -0,0 +1,55 @@
+#:schema https://json.schemastore.org/any.json
+
+root = "."
+testdata_dir = "testdata"
+tmp_dir = "tmp"
+
+[build]
+  args_bin = []
+  bin = "./tmp/main"
+  cmd = "go build -o ./tmp/main ."
+  delay = 1000
+  entrypoint = ["./tmp/main"]
+  exclude_dir = ["assets", "tmp", "vendor", "testdata"]
+  exclude_file = []
+  exclude_regex = ["_test.go"]
+  exclude_unchanged = false
+  follow_symlink = false
+  full_bin = ""
+  include_dir = ["../pkg"]
+  include_ext = ["go", "tpl", "tmpl", "html"]
+  include_file = []
+  kill_delay = "0s"
+  log = "build-errors.log"
+  poll = false
+  poll_interval = 0
+  post_cmd = []
+  pre_cmd = []
+  rerun = false
+  rerun_delay = 500
+  send_interrupt = false
+  stop_on_error = false
+
+[color]
+  app = ""
+  build = "yellow"
+  main = "magenta"
+  runner = "green"
+  watcher = "cyan"
+
+[log]
+  main_only = false
+  silent = false
+  time = false
+
+[misc]
+  clean_on_exit = false
+
+[proxy]
+  app_port = 0
+  enabled = false
+  proxy_port = 0
+
+[screen]
+  clear_on_rebuild = false
+  keep_scroll = true

backend/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:1
 
-FROM golang:1.24.3 AS builder
+FROM golang:1.25.5 AS builder
 
 # Set destination for COPY
 WORKDIR /app

backend/go.mod

@@ -1,56 +1,36 @@
 module backend
 
-go 1.24.0
-
-toolchain go1.24.3
+go 1.25.5
 
 require (
-	dario.cat/mergo v1.0.2
-	github.com/dustin/go-humanize v1.0.1
-	github.com/golang-jwt/jwt/v5 v5.3.0
+	github.com/golang-jwt/jwt/v5 v5.3.1
 	github.com/gorilla/sessions v1.4.0
-	github.com/hibiken/asynq v0.25.1
-	github.com/labstack/echo-contrib v0.17.4
-	github.com/labstack/echo/v4 v4.13.4
+	github.com/hibiken/asynq v0.26.0
+	github.com/labstack/echo/v5 v5.0.1
 	github.com/matoous/go-nanoid/v2 v2.1.0
-	github.com/redis/go-redis/v9 v9.14.0
-	github.com/samber/lo v1.51.0
+	github.com/samber/lo v1.53.0
 	github.com/spf13/cast v1.10.0
-	github.com/spf13/viper v1.21.0
 	github.com/stretchr/testify v1.11.1
-	go.uber.org/zap v1.27.0
-	golang.org/x/crypto v0.42.0
-	golang.org/x/time v0.13.0
+	go.uber.org/zap v1.27.1
+	golang.org/x/crypto v0.49.0
 )
 
 require (
 	github.com/cespare/xxhash/v2 v2.3.0 // indirect
 	github.com/davecgh/go-spew v1.1.1 // indirect
 	github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f // indirect
-	github.com/fsnotify/fsnotify v1.9.0 // indirect
-	github.com/go-viper/mapstructure/v2 v2.4.0 // indirect
-	github.com/google/go-cmp v0.7.0 // indirect
 	github.com/google/uuid v1.6.0 // indirect
-	github.com/gorilla/context v1.1.2 // indirect
 	github.com/gorilla/securecookie v1.1.2 // indirect
-	github.com/labstack/gommon v0.4.2 // indirect
-	github.com/mattn/go-colorable v0.1.14 // indirect
-	github.com/mattn/go-isatty v0.0.20 // indirect
-	github.com/pelletier/go-toml/v2 v2.2.4 // indirect
 	github.com/pmezard/go-difflib v1.0.0 // indirect
+	github.com/redis/go-redis/v9 v9.18.0 // indirect
 	github.com/robfig/cron/v3 v3.0.1 // indirect
-	github.com/sagikazarmark/locafero v0.12.0 // indirect
-	github.com/spf13/afero v1.15.0 // indirect
-	github.com/spf13/pflag v1.0.10 // indirect
-	github.com/subosito/gotenv v1.6.0 // indirect
-	github.com/valyala/bytebufferpool v1.0.0 // indirect
-	github.com/valyala/fasttemplate v1.2.2 // indirect
+	go.uber.org/atomic v1.11.0 // indirect
 	go.uber.org/multierr v1.11.0 // indirect
-	go.yaml.in/yaml/v3 v3.0.4 // indirect
-	golang.org/x/net v0.44.0 // indirect
-	golang.org/x/sys v0.36.0 // indirect
-	golang.org/x/text v0.29.0 // indirect
-	google.golang.org/protobuf v1.36.9 // indirect
+	golang.org/x/net v0.52.0 // indirect
+	golang.org/x/sys v0.42.0 // indirect
+	golang.org/x/text v0.35.0 // indirect
+	golang.org/x/time v0.15.0 // indirect
+	google.golang.org/protobuf v1.36.11 // indirect
 	gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 // indirect
 	gopkg.in/yaml.v3 v3.0.1 // indirect
 )

backend/go.sum

@@ -1,5 +1,3 @@
-dario.cat/mergo v1.0.2 h1:85+piFYR1tMbRrLcDwR18y4UKJ3aH1Tbzi24VRW1TK8=
-dario.cat/mergo v1.0.2/go.mod h1:E/hbnu0NxMFBjpMIE34DRGLWqDy0g5FuKDhCb31ngxA=
 github.com/bsm/ginkgo/v2 v2.12.0 h1:Ny8MWAHyOepLGlLKYmXG4IEkioBysk6GpaRTLC8zwWs=
 github.com/bsm/ginkgo/v2 v2.12.0/go.mod h1:SwYbGRRDovPVboqFv0tPTcG1sN61LM1Z4ARdbAV9g4c=
 github.com/bsm/gomega v1.27.10 h1:yeMWxP2pV2fG3FgAODIY8EiRE3dy0aeFYt4l7wh6yKA=
@@ -10,97 +8,68 @@ github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f h1:lO4WD4F/rVNCu3HqELle0jiPLLBs70cWOduZpkS1E78=
 github.com/dgryski/go-rendezvous v0.0.0-20200823014737-9f7001d12a5f/go.mod h1:cuUVRXasLTGF7a8hSLbxyZXjz+1KgoB3wDUb6vlszIc=
-github.com/dustin/go-humanize v1.0.1 h1:GzkhY7T5VNhEkwH0PVJgjz+fX1rhBrR7pRT3mDkpeCY=
-github.com/dustin/go-humanize v1.0.1/go.mod h1:Mu1zIs6XwVuF/gI1OepvI0qD18qycQx+mFykh5fBlto=
 github.com/frankban/quicktest v1.14.6 h1:7Xjx+VpznH+oBnejlPUj8oUpdxnVs4f8XU8WnHkI4W8=
 github.com/frankban/quicktest v1.14.6/go.mod h1:4ptaffx2x8+WTWXmUCuVU6aPUX1/Mz7zb5vbUoiM6w0=
-github.com/fsnotify/fsnotify v1.9.0 h1:2Ml+OJNzbYCTzsxtv8vKSFD9PbJjmhYF14k/jKC7S9k=
-github.com/fsnotify/fsnotify v1.9.0/go.mod h1:8jBTzvmWwFyi3Pb8djgCCO5IBqzKJ/Jwo8TRcHyHii0=
-github.com/go-viper/mapstructure/v2 v2.4.0 h1:EBsztssimR/CONLSZZ04E8qAkxNYq4Qp9LvH92wZUgs=
-github.com/go-viper/mapstructure/v2 v2.4.0/go.mod h1:oJDH3BJKyqBA2TXFhDsKDGDTlndYOZ6rGS0BRZIxGhM=
-github.com/golang-jwt/jwt/v5 v5.3.0 h1:pv4AsKCKKZuqlgs5sUmn4x8UlGa0kEVt/puTpKx9vvo=
-github.com/golang-jwt/jwt/v5 v5.3.0/go.mod h1:fxCRLWMO43lRc8nhHWY6LGqRcf+1gQWArsqaEUEa5bE=
+github.com/golang-jwt/jwt/v5 v5.3.1 h1:kYf81DTWFe7t+1VvL7eS+jKFVWaUnK9cB1qbwn63YCY=
+github.com/golang-jwt/jwt/v5 v5.3.1/go.mod h1:fxCRLWMO43lRc8nhHWY6LGqRcf+1gQWArsqaEUEa5bE=
 github.com/google/go-cmp v0.7.0 h1:wk8382ETsv4JYUZwIsn6YpYiWiBsYLSJiTsyBybVuN8=
 github.com/google/go-cmp v0.7.0/go.mod h1:pXiqmnSA92OHEEa9HXL2W4E7lf9JzCmGVUdgjX3N/iU=
 github.com/google/gofuzz v1.2.0 h1:xRy4A+RhZaiKjJ1bPfwQ8sedCA+YS2YcCHW6ec7JMi0=
 github.com/google/gofuzz v1.2.0/go.mod h1:dBl0BpW6vV/+mYPU4Po3pmUjxk6FQPldtuIdl/M65Eg=
 github.com/google/uuid v1.6.0 h1:NIvaJDMOsjHA8n1jAhLSgzrAzy1Hgr+hNrb57e+94F0=
 github.com/google/uuid v1.6.0/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
-github.com/gorilla/context v1.1.2 h1:WRkNAv2uoa03QNIc1A6u4O7DAGMUVoopZhkiXWA2V1o=
-github.com/gorilla/context v1.1.2/go.mod h1:KDPwT9i/MeWHiLl90fuTgrt4/wPcv75vFAZLaOOcbxM=
 github.com/gorilla/securecookie v1.1.2 h1:YCIWL56dvtr73r6715mJs5ZvhtnY73hBvEF8kXD8ePA=
 github.com/gorilla/securecookie v1.1.2/go.mod h1:NfCASbcHqRSY+3a8tlWJwsQap2VX5pwzwo4h3eOamfo=
 github.com/gorilla/sessions v1.4.0 h1:kpIYOp/oi6MG/p5PgxApU8srsSw9tuFbt46Lt7auzqQ=
 github.com/gorilla/sessions v1.4.0/go.mod h1:FLWm50oby91+hl7p/wRxDth9bWSuk0qVL2emc7lT5ik=
-github.com/hibiken/asynq v0.25.1 h1:phj028N0nm15n8O2ims+IvJ2gz4k2auvermngh9JhTw=
-github.com/hibiken/asynq v0.25.1/go.mod h1:pazWNOLBu0FEynQRBvHA26qdIKRSmfdIfUm4HdsLmXg=
+github.com/hibiken/asynq v0.26.0 h1:1Zxr92MlDnb1Zt/QR5g2vSCqUS03i95lUfqx5X7/wrw=
+github.com/hibiken/asynq v0.26.0/go.mod h1:Qk4e57bTnWDoyJ67VkchuV6VzSM9IQW2nPvAGuDyw58=
+github.com/klauspost/cpuid/v2 v2.0.9 h1:lgaqFMSdTdQYdZ04uHyN2d/eKdOMyi2YLSvlQIBFYa4=
+github.com/klauspost/cpuid/v2 v2.0.9/go.mod h1:FInQzS24/EEf25PyTYn52gqo7WaD8xa0213Md/qVLRg=
 github.com/kr/pretty v0.3.1 h1:flRD4NNwYAUpkphVc1HcthR4KEIFJ65n8Mw5qdRn3LE=
 github.com/kr/pretty v0.3.1/go.mod h1:hoEshYVHaxMs3cyo3Yncou5ZscifuDolrwPKZanG3xk=
 github.com/kr/text v0.2.0 h1:5Nx0Ya0ZqY2ygV366QzturHI13Jq95ApcVaJBhpS+AY=
 github.com/kr/text v0.2.0/go.mod h1:eLer722TekiGuMkidMxC/pM04lWEeraHUUmBw8l2grE=
-github.com/labstack/echo-contrib v0.17.4 h1:g5mfsrJfJTKv+F5uNKCyrjLK7js+ZW6HTjg4FnDxxgk=
-github.com/labstack/echo-contrib v0.17.4/go.mod h1:9O7ZPAHUeMGTOAfg80YqQduHzt0CzLak36PZRldYrZ0=
-github.com/labstack/echo/v4 v4.13.4 h1:oTZZW+T3s9gAu5L8vmzihV7/lkXGZuITzTQkTEhcXEA=
-github.com/labstack/echo/v4 v4.13.4/go.mod h1:g63b33BZ5vZzcIUF8AtRH40DrTlXnx4UMC8rBdndmjQ=
-github.com/labstack/gommon v0.4.2 h1:F8qTUNXgG1+6WQmqoUWnz8WiEU60mXVVw0P4ht1WRA0=
-github.com/labstack/gommon v0.4.2/go.mod h1:QlUFxVM+SNXhDL/Z7YhocGIBYOiwB0mXm1+1bAPHPyU=
+github.com/labstack/echo/v5 v5.0.1 h1:60L7x1KMWRIJuaFqvnEHH322g+YnsMWq5Rzaeo6lcP4=
+github.com/labstack/echo/v5 v5.0.1/go.mod h1:SyvlSdObGjRXeQfCCXW/sybkZdOOQZBmpKF0bvALaeo=
 github.com/matoous/go-nanoid/v2 v2.1.0 h1:P64+dmq21hhWdtvZfEAofnvJULaRR1Yib0+PnU669bE=
 github.com/matoous/go-nanoid/v2 v2.1.0/go.mod h1:KlbGNQ+FhrUNIHUxZdL63t7tl4LaPkZNpUULS8H4uVM=
-github.com/mattn/go-colorable v0.1.14 h1:9A9LHSqF/7dyVVX6g0U9cwm9pG3kP9gSzcuIPHPsaIE=
-github.com/mattn/go-colorable v0.1.14/go.mod h1:6LmQG8QLFO4G5z1gPvYEzlUgJ2wF+stgPZH1UqBm1s8=
-github.com/mattn/go-isatty v0.0.20 h1:xfD0iDuEKnDkl03q4limB+vH+GxLEtL/jb4xVJSWWEY=
-github.com/mattn/go-isatty v0.0.20/go.mod h1:W+V8PltTTMOvKvAeJH7IuucS94S2C6jfK/D7dTCTo3Y=
-github.com/pelletier/go-toml/v2 v2.2.4 h1:mye9XuhQ6gvn5h28+VilKrrPoQVanw5PMw/TB0t5Ec4=
-github.com/pelletier/go-toml/v2 v2.2.4/go.mod h1:2gIqNv+qfxSVS7cM2xJQKtLSTLUE9V8t9Stt+h56mCY=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
-github.com/redis/go-redis/v9 v9.14.0 h1:u4tNCjXOyzfgeLN+vAZaW1xUooqWDqVEsZN0U01jfAE=
-github.com/redis/go-redis/v9 v9.14.0/go.mod h1:huWgSWd8mW6+m0VPhJjSSQ+d6Nh1VICQ6Q5lHuCH/Iw=
+github.com/redis/go-redis/v9 v9.18.0 h1:pMkxYPkEbMPwRdenAzUNyFNrDgHx9U+DrBabWNfSRQs=
+github.com/redis/go-redis/v9 v9.18.0/go.mod h1:k3ufPphLU5YXwNTUcCRXGxUoF1fqxnhFQmscfkCoDA0=
 github.com/robfig/cron/v3 v3.0.1 h1:WdRxkvbJztn8LMz/QEvLN5sBU+xKpSqwwUO1Pjr4qDs=
 github.com/robfig/cron/v3 v3.0.1/go.mod h1:eQICP3HwyT7UooqI/z+Ov+PtYAWygg1TEWWzGIFLtro=
 github.com/rogpeppe/go-internal v1.9.0 h1:73kH8U+JUqXU8lRuOHeVHaa/SZPifC7BkcraZVejAe8=
 github.com/rogpeppe/go-internal v1.9.0/go.mod h1:WtVeX8xhTBvf0smdhujwtBcq4Qrzq/fJaraNFVN+nFs=
-github.com/sagikazarmark/locafero v0.12.0 h1:/NQhBAkUb4+fH1jivKHWusDYFjMOOKU88eegjfxfHb4=
-github.com/sagikazarmark/locafero v0.12.0/go.mod h1:sZh36u/YSZ918v0Io+U9ogLYQJ9tLLBmM4eneO6WwsI=
-github.com/samber/lo v1.51.0 h1:kysRYLbHy/MB7kQZf5DSN50JHmMsNEdeY24VzJFu7wI=
-github.com/samber/lo v1.51.0/go.mod h1:4+MXEGsJzbKGaUEQFKBq2xtfuznW9oz/WrgyzMzRoM0=
-github.com/spf13/afero v1.15.0 h1:b/YBCLWAJdFWJTN9cLhiXXcD7mzKn9Dm86dNnfyQw1I=
-github.com/spf13/afero v1.15.0/go.mod h1:NC2ByUVxtQs4b3sIUphxK0NioZnmxgyCrfzeuq8lxMg=
+github.com/samber/lo v1.53.0 h1:t975lj2py4kJPQ6haz1QMgtId2gtmfktACxIXArw3HM=
+github.com/samber/lo v1.53.0/go.mod h1:4+MXEGsJzbKGaUEQFKBq2xtfuznW9oz/WrgyzMzRoM0=
 github.com/spf13/cast v1.10.0 h1:h2x0u2shc1QuLHfxi+cTJvs30+ZAHOGRic8uyGTDWxY=
 github.com/spf13/cast v1.10.0/go.mod h1:jNfB8QC9IA6ZuY2ZjDp0KtFO2LZZlg4S/7bzP6qqeHo=
-github.com/spf13/pflag v1.0.10 h1:4EBh2KAYBwaONj6b2Ye1GiHfwjqyROoF4RwYO+vPwFk=
-github.com/spf13/pflag v1.0.10/go.mod h1:McXfInJRrz4CZXVZOBLb0bTZqETkiAhM9Iw0y3An2Bg=
-github.com/spf13/viper v1.21.0 h1:x5S+0EU27Lbphp4UKm1C+1oQO+rKx36vfCoaVebLFSU=
-github.com/spf13/viper v1.21.0/go.mod h1:P0lhsswPGWD/1lZJ9ny3fYnVqxiegrlNrEmgLjbTCAY=
 github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
 github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
-github.com/subosito/gotenv v1.6.0 h1:9NlTDc1FTs4qu0DDq7AEtTPNw6SVm7uBMsUCUjABIf8=
-github.com/subosito/gotenv v1.6.0/go.mod h1:Dk4QP5c2W3ibzajGcXpNraDfq2IrhjMIvMSWPKKo0FU=
-github.com/valyala/bytebufferpool v1.0.0 h1:GqA5TC/0021Y/b9FG4Oi9Mr3q7XYx6KllzawFIhcdPw=
-github.com/valyala/bytebufferpool v1.0.0/go.mod h1:6bBcMArwyJ5K/AmCkWv1jt77kVWyCJ6HpOuEn7z0Csc=
-github.com/valyala/fasttemplate v1.2.2 h1:lxLXG0uE3Qnshl9QyaK6XJxMXlQZELvChBOCmQD0Loo=
-github.com/valyala/fasttemplate v1.2.2/go.mod h1:KHLXt3tVN2HBp8eijSv/kGJopbvo7S+qRAEEKiv+SiQ=
+github.com/zeebo/xxh3 v1.0.2 h1:xZmwmqxHZA8AI603jOQ0tMqmBr9lPeFwGg6d+xy9DC0=
+github.com/zeebo/xxh3 v1.0.2/go.mod h1:5NWz9Sef7zIDm2JHfFlcQvNekmcEl9ekUZQQKCYaDcA=
+go.uber.org/atomic v1.11.0 h1:ZvwS0R+56ePWxUNi+Atn9dWONBPp/AUETXlHW0DxSjE=
+go.uber.org/atomic v1.11.0/go.mod h1:LUxbIzbOniOlMKjJjyPfpl4v+PKK2cNJn91OQbhoJI0=
 go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
 go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
 go.uber.org/multierr v1.11.0 h1:blXXJkSxSSfBVBlC76pxqeO+LN3aDfLQo+309xJstO0=
 go.uber.org/multierr v1.11.0/go.mod h1:20+QtiLqy0Nd6FdQB9TLXag12DsQkrbs3htMFfDN80Y=
-go.uber.org/zap v1.27.0 h1:aJMhYGrd5QSmlpLMr2MftRKl7t8J8PTZPA732ud/XR8=
-go.uber.org/zap v1.27.0/go.mod h1:GB2qFLM7cTU87MWRP2mPIjqfIDnGu+VIO4V/SdhGo2E=
-go.yaml.in/yaml/v3 v3.0.4 h1:tfq32ie2Jv2UxXFdLJdh3jXuOzWiL1fo0bu/FbuKpbc=
-go.yaml.in/yaml/v3 v3.0.4/go.mod h1:DhzuOOF2ATzADvBadXxruRBLzYTpT36CKvDb3+aBEFg=
-golang.org/x/crypto v0.42.0 h1:chiH31gIWm57EkTXpwnqf8qeuMUi0yekh6mT2AvFlqI=
-golang.org/x/crypto v0.42.0/go.mod h1:4+rDnOTJhQCx2q7/j6rAN5XDw8kPjeaXEUR2eL94ix8=
-golang.org/x/net v0.44.0 h1:evd8IRDyfNBMBTTY5XRF1vaZlD+EmWx6x8PkhR04H/I=
-golang.org/x/net v0.44.0/go.mod h1:ECOoLqd5U3Lhyeyo/QDCEVQ4sNgYsqvCZ722XogGieY=
-golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.36.0 h1:KVRy2GtZBrk1cBYA7MKu5bEZFxQk4NIDV6RLVcC8o0k=
-golang.org/x/sys v0.36.0/go.mod h1:OgkHotnGiDImocRcuBABYBEXf8A9a87e/uXjp9XT3ks=
-golang.org/x/text v0.29.0 h1:1neNs90w9YzJ9BocxfsQNHKuAT4pkghyXc4nhZ6sJvk=
-golang.org/x/text v0.29.0/go.mod h1:7MhJOA9CD2qZyOKYazxdYMF85OwPdEr9jTtBpO7ydH4=
-golang.org/x/time v0.13.0 h1:eUlYslOIt32DgYD6utsuUeHs4d7AsEYLuIAdg7FlYgI=
-golang.org/x/time v0.13.0/go.mod h1:eL/Oa2bBBK0TkX57Fyni+NgnyQQN4LitPmob2Hjnqw4=
-google.golang.org/protobuf v1.36.9 h1:w2gp2mA27hUeUzj9Ex9FBjsBm40zfaDtEWow293U7Iw=
-google.golang.org/protobuf v1.36.9/go.mod h1:fuxRtAxBytpl4zzqUh6/eyUujkJdNiuEkXntxiD/uRU=
+go.uber.org/zap v1.27.1 h1:08RqriUEv8+ArZRYSTXy1LeBScaMpVSTBhCeaZYfMYc=
+go.uber.org/zap v1.27.1/go.mod h1:GB2qFLM7cTU87MWRP2mPIjqfIDnGu+VIO4V/SdhGo2E=
+golang.org/x/crypto v0.49.0 h1:+Ng2ULVvLHnJ/ZFEq4KdcDd/cfjrrjjNSXNzxg0Y4U4=
+golang.org/x/crypto v0.49.0/go.mod h1:ErX4dUh2UM+CFYiXZRTcMpEcN8b/1gxEuv3nODoYtCA=
+golang.org/x/net v0.52.0 h1:He/TN1l0e4mmR3QqHMT2Xab3Aj3L9qjbhRm78/6jrW0=
+golang.org/x/net v0.52.0/go.mod h1:R1MAz7uMZxVMualyPXb+VaqGSa3LIaUqk0eEt3w36Sw=
+golang.org/x/sys v0.42.0 h1:omrd2nAlyT5ESRdCLYdm3+fMfNFE/+Rf4bDIQImRJeo=
+golang.org/x/sys v0.42.0/go.mod h1:4GL1E5IUh+htKOUEOaiffhrAeqysfVGipDYzABqnCmw=
+golang.org/x/text v0.35.0 h1:JOVx6vVDFokkpaq1AEptVzLTpDe9KGpj5tR4/X+ybL8=
+golang.org/x/text v0.35.0/go.mod h1:khi/HExzZJ2pGnjenulevKNX1W67CUy0AsXcNubPGCA=
+golang.org/x/time v0.15.0 h1:bbrp8t3bGUeFOx08pvsMYRTCVSMk89u4tKbNOZbp88U=
+golang.org/x/time v0.15.0/go.mod h1:Y4YMaQmXwGQZoFaVFk4YpCt4FLQMYKZe9oeV/f4MSno=
+google.golang.org/protobuf v1.36.11 h1:fV6ZwhNocDyBLK0dj+fg8ektcVegBBuEolpbTQyBNVE=
+google.golang.org/protobuf v1.36.11/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j23XfzDpco=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 h1:YR8cESwS4TdDjEe65xsg0ogRM/Nc3DYOhEAlW+xobZo=
 gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=

backend/internal/controllers/about.go

@@ -0,0 +1,45 @@
+package controllers
+
+import (
+	"backend/internal/utils"
+	"encoding/json"
+	"pkg/models"
+	u "pkg/utils"
+
+	"github.com/labstack/echo/v5"
+	"github.com/samber/lo"
+)
+
+func GetAbout(c *echo.Context) error {
+	maxStorageSize, err := u.GetFileSize(u.GetEnv("upload.maximum"))
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	fileInfoMap, err := models.GetRedisFileInfoAll()
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	currentFileSize := lo.Reduce(lo.Values(fileInfoMap), func(agg int64, item string, _ int) int64 {
+		var fileInfo models.RedisFileInfo
+		err := json.Unmarshal([]byte(item), &fileInfo)
+		if err != nil {
+			return agg
+		}
+		return agg + fileInfo.FileSize
+	}, 0)
+
+	return utils.HTTPSuccessHandler(c, map[string]any{
+		"bg_url":  u.GetEnv("about.bg_url"),
+		"content": u.GetEnvMap("about.content"),
+		"email":   u.GetEnv("about.email"),
+		"name":    u.GetEnv("about.name"),
+		"url":     u.GetEnv("about.url"),
+		"avatar":  u.GetEnv("about.avatar"),
+		"file": map[string]any{
+			"maximun": maxStorageSize,
+			"current": currentFileSize,
+		},
+	})
+}

backend/internal/controllers/config.go

@@ -0,0 +1,54 @@
+package controllers
+
+import (
+	"backend/internal/utils"
+	u "pkg/utils"
+	"time"
+
+	"github.com/labstack/echo/v5"
+	"github.com/samber/lo"
+	"github.com/spf13/cast"
+)
+
+var defaultEnabledFeatures = []string{
+	"file-share",
+	"text-share",
+}
+
+func getEnabledKeys(config map[string]any) []string {
+	return lo.FilterMap(lo.Entries(config), func(e lo.Entry[string, any], _ int) (string, bool) {
+		node, ok := e.Value.(map[string]any)
+		return e.Key, ok && cast.ToBool(node["enabled"])
+	})
+}
+
+func GetConfig(c *echo.Context) error {
+	featureConfig := u.GetEnvMap("features")
+	defaultFeatureConfig := lo.SliceToMap(defaultEnabledFeatures, func(item string) (string, any) {
+		return item, map[string]any{
+			"enabled": true,
+		}
+	})
+
+	featureConfig = lo.Assign(defaultFeatureConfig, featureConfig)
+	features := getEnabledKeys(featureConfig)
+	// textTranslateProviderConfig := u.GetEnvMap("features.text-translate.provider")
+	// textTranslateProviders := getEnabledKeys(textTranslateProviderConfig)
+
+	return utils.HTTPSuccessHandler(c, map[string]any{
+		"site_title":     u.GetEnvMap("site.title"),
+		"site_desc":      u.GetEnvMap("site.desc"),
+		"site_url":       u.GetEnv("site.url"),
+		"site_icon":      u.GetEnvWithDefault("site.icon", "/logo.png"),
+		"site_bg_url":    u.GetEnvWithDefault("site.bg_url", "https://img.fudaoyuan.icu/api/1/random/?scale_min=1.5&webp=true&md=false&format=302"),
+		"site_enable_bg": cast.ToBool(u.GetEnvWithDefault("site.enable_bg", "true")),
+		"version":        u.GetEnvWithDefault("VERSION", "dev"),
+		"build_time":     cast.ToInt(u.GetEnvWithDefault("BUILD_TIME", cast.ToString(time.Now().Unix()))),
+		"features":       features,
+		"config":         map[string]any{
+			// "text-translate": map[string]any{
+			// 	"provider": textTranslateProviders,
+			// },
+		},
+	})
+}

backend/internal/controllers/download.go

@@ -1,15 +1,19 @@
 package controllers
 
 import (
-	"backend/internal/models"
 	"backend/internal/utils"
-	"backend/middleware"
-	"errors"
+	"context"
+	"encoding/json"
 	"fmt"
+	"pkg/models"
+	u "pkg/utils"
 	"time"
 
 	"github.com/golang-jwt/jwt/v5"
-	"github.com/labstack/echo/v4"
+	"github.com/hibiken/asynq"
+	"github.com/labstack/echo/v5"
+	"github.com/samber/lo"
+	"github.com/spf13/cast"
 )
 
 type DownloadShareClaims struct {
@@ -17,31 +21,29 @@ type DownloadShareClaims struct {
 	jwt.RegisteredClaims
 }
 
-func DownloadShare(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-	token := cc.FormValue("token")
+func DownloadShare(c *echo.Context) error {
+	token := c.FormValue("token")
 	if token == "" {
-		return utils.HTTPErrorHandler(c, errors.New("缺少token"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 	claims := DownloadShareClaims{}
 	t, err := jwt.ParseWithClaims(token, &claims, func(token *jwt.Token) (interface{}, error) {
-		return []byte(utils.GetEnv("download_secret")), nil
+		return []byte(u.GetEnv("share.download_secret")), nil
 	})
-	if err != nil {
-		return utils.HTTPErrorHandler(c, err)
+	if err != nil || !t.Valid {
+		return utils.HTTPErrorHandler(c, lo.Ternary(err != nil, err, ErrInvalidRequest))
 	}
-	if !t.Valid {
-		return utils.HTTPErrorHandler(c, errors.New("token格式错误"))
+	shareInfo, err := models.GetRedisShareInfo(claims.ShareId)
+	if err != nil || shareInfo == nil {
+		return utils.HTTPErrorHandler(c, lo.Ternary(err != nil, err, ErrShareNotFound))
 	}
-	shareInfo, _ := models.GetRedisShareInfo(claims.ShareId)
-
 	if shareInfo.Type == models.ShareTypeFile {
 		fileInfo, _ := models.GetRedisFileInfo(shareInfo.Data)
-		uploadPath, err := utils.GetUploadDirPath()
+		uploadPath, err := u.GetUploadDirPath()
 		if err != nil {
 			return err
 		}
-		return cc.Attachment(fmt.Sprintf("%s/%s", uploadPath, utils.GetFileId(fileInfo.FileHash, fileInfo.FileSize)), shareInfo.FileName)
+		return c.Attachment(fmt.Sprintf("%s/%s", uploadPath, u.GetFileId(fileInfo.FileHash, fileInfo.FileSize)), shareInfo.FileName)
 	}
 	return utils.HTTPSuccessHandler(c, map[string]any{
 		"data": shareInfo.Data,
@@ -53,16 +55,14 @@ type VaildateShareProps struct {
 	Password string `json:"password"`
 }
 
-func VaildateShare(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-
+func VaildateShare(c *echo.Context) error {
 	r := new(VaildateShareProps)
-	if err := cc.Bind(r); err != nil {
+	if err := c.Bind(r); err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
 	if r.ShareId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("缺少分享ID"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 
 	shareInfo, err := models.GetRedisShareInfo(r.ShareId)
@@ -70,63 +70,89 @@ func VaildateShare(c echo.Context) error {
 		return utils.HTTPErrorHandler(c, err)
 	}
 	if shareInfo == nil {
-		return utils.HTTPErrorHandler(c, errors.New("分享不存在"))
+		return utils.HTTPErrorHandler(c, ErrShareNotFound)
 	}
 	if shareInfo.Password != "" {
 		if r.Password == "" {
-			return utils.HTTPErrorHandler(c, errors.New("缺少分享密码"))
+			return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 		}
 		hash, err := utils.GeneratePasswordHash(r.Password)
 		if err != nil {
 			return utils.HTTPErrorHandler(c, err)
 		}
 		if hash != shareInfo.Password {
-			return utils.HTTPErrorHandler(c, errors.New("分享密码错误"))
+			return utils.HTTPErrorHandler(c, ErrInvalidSharePassword)
 		}
 	}
-	// 如果下载次数为0，则设置为-1 防止空值问题
-	if shareInfo.ViewNum < 1 {
-		return utils.HTTPErrorHandler(c, errors.New("下载次数不足"))
-	}
-	token := jwt.NewWithClaims(jwt.SigningMethodHS256, DownloadShareClaims{
-		ShareId: r.ShareId,
-		RegisteredClaims: jwt.RegisteredClaims{
-			ExpiresAt: jwt.NewNumericDate(time.Now().Add(60 * time.Minute)),
-		},
-	})
+	return u.WithLocker(context.Background(), "015:shareInfoMap:"+r.ShareId, 0, func(ctx context.Context) error {
+		shareInfo, err := models.GetRedisShareInfo(r.ShareId)
+		if err != nil || shareInfo == nil {
+			return utils.HTTPErrorHandler(c, lo.Ternary(err != nil, err, ErrShareNotFound))
+		}
+		if shareInfo.ViewNum < 1 {
+			return utils.HTTPErrorHandler(c, ErrInsufficientDownloadQuota)
+		}
+		downloadWindow := u.GetEnvWithDefault("share.download_window", "12")
+		token := jwt.NewWithClaims(jwt.SigningMethodHS256, DownloadShareClaims{
+			ShareId: r.ShareId,
+			RegisteredClaims: jwt.RegisteredClaims{
+				ExpiresAt: jwt.NewNumericDate(time.Now().Add(cast.ToDuration(downloadWindow + "h"))),
+			},
+		})
 
-	// Sign and get the complete encoded token as a string using the secret
-	downloadToken, err := token.SignedString([]byte(utils.GetEnv("download_secret")))
-	if err != nil {
-		return utils.HTTPErrorHandler(c, err)
-	}
-	if shareInfo.Type == models.ShareTypeFile {
-		fileInfo, err := models.GetRedisFileInfo(shareInfo.Data)
+		// Sign and get the complete encoded token as a string using the secret
+		downloadToken, err := token.SignedString([]byte(u.GetEnv("share.download_secret")))
 		if err != nil {
 			return utils.HTTPErrorHandler(c, err)
 		}
-		if fileInfo == nil {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件不存在"))
+		if shareInfo.Type == models.ShareTypeFile {
+			fileInfo, err := models.GetRedisFileInfo(shareInfo.Data)
+			if err != nil {
+				return utils.HTTPErrorHandler(c, err)
+			}
+			if fileInfo == nil {
+				return utils.HTTPErrorHandler(c, ErrShareFileNotFound)
+			}
+			if fileInfo.FileType != models.FileTypeUpload {
+				return utils.HTTPErrorHandler(c, ErrInvalidShareFileState)
+			}
 		}
-		if fileInfo.FileType != models.FileTypeUpload {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件状态错误"))
+		// download_nums 必须放在创建token的时候减掉，不然多线程下载会导致多次减掉
+		_, err = models.SetRedisShareInfo(r.ShareId, func(shareInfo *models.RedisShareInfo) *models.RedisShareInfo {
+			shareInfo.ViewNum -= 1
+			return shareInfo
+		})
+		if err != nil {
+			return utils.HTTPErrorHandler(c, err)
+		}
+
+		// 统计分享数
+		currentDate := time.Now().Format("2006-01-02")
+		_, err = models.SetRedisStat(currentDate, func(stat *models.StatData) *models.StatData {
+			stat.DownloadNum += 1
+			return stat
+		})
+		if err != nil {
+			return utils.HTTPErrorHandler(c, err)
+		}
+
+		if len(shareInfo.NotifyEmails) > 0 || len(shareInfo.NotifyWebhooks) > 0 {
+			payload, err := json.Marshal(map[string]string{
+				"share_id": r.ShareId,
+				"ip":       c.RealIP(),
+			})
+			if err == nil {
+				_, _ = u.GetQueueClient().Enqueue(asynq.NewTask("share:notify", payload))
+			}
+		}
+
+		if shareInfo.Type == models.ShareTypeFile {
+			return utils.HTTPSuccessHandler(c, map[string]any{
+				"token": downloadToken,
+			})
 		}
-	}
-	// download_nums 必须放在创建token的时候减掉，不然多线程下载会导致多次减掉
-	latestViewNum := shareInfo.ViewNum - 1
-	// 如果下载次数为0，则设置为-1 防止空值问题
-	if latestViewNum < 1 {
-		latestViewNum = -1
-	}
-	models.SetRedisShareInfo(r.ShareId, models.RedisShareInfo{
-		ViewNum: latestViewNum,
-	})
-	if shareInfo.Type == models.ShareTypeFile {
 		return utils.HTTPSuccessHandler(c, map[string]any{
 			"token": downloadToken,
 		})
-	}
-	return utils.HTTPSuccessHandler(c, map[string]any{
-		"token": downloadToken,
 	})
 }

backend/internal/controllers/errors.go

@@ -0,0 +1,30 @@
+package controllers
+
+import "errors"
+
+var (
+	// 通用错误（参数校验失败）
+	ErrInvalidRequest = errors.New("InvalidRequest") // 调用接口参数错误
+
+	// 任务相关
+	ErrTaskNotFound = errors.New("TaskNotFound") // 任务不存在
+	ErrTaskExpired  = errors.New("TaskExpired")  // 任务已过期
+
+	// 文件上传相关
+	ErrInsufficientStorage    = errors.New("InsufficientStorage")    // 存储空间不足
+	ErrUploadTaskExpired      = errors.New("UploadTaskExpired")      // 上传任务已过期
+	ErrInvalidUploadTaskState = errors.New("InvalidUploadTaskState") // 上传任务状态错误
+	ErrInvalidFileSliceIndex  = errors.New("InvalidFileSliceIndex")  // 文件切片索引错误
+	ErrInvalidFileSliceSize   = errors.New("InvalidFileSliceSize")   // 文件切片大小错误
+	ErrIncompleteFileSlices   = errors.New("IncompleteFileSlices")   // 文件切片不完整
+	ErrFileHashMismatch       = errors.New("FileHashMismatch")       // 文件Hash不一致
+
+	// 分享相关
+	ErrShareFileNotFound     = errors.New("ShareFileNotFound")     // 分享文件不存在
+	ErrInvalidShareFileState = errors.New("InvalidShareFileState") // 分享文件状态错误
+	ErrShareNotFound         = errors.New("ShareNotFound")         // 分享不存在
+
+	// 下载相关
+	ErrInvalidSharePassword      = errors.New("InvalidSharePassword")      // 分享密码错误
+	ErrInsufficientDownloadQuota = errors.New("InsufficientDownloadQuota") // 下载次数不足
+)

backend/internal/controllers/file.go

@@ -1,22 +1,21 @@
 package controllers
 
 import (
-	"backend/internal/models"
 	"backend/internal/services"
 	"backend/internal/utils"
 	"encoding/json"
-	"errors"
-	"fmt"
+	"math"
 	"mime/multipart"
 	"os"
-	"path/filepath"
+	"pkg/models"
+	s "pkg/services"
+	u "pkg/utils"
 	"time"
 
-	"github.com/hibiken/asynq"
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 )
 
-func CreateUploadTask(c echo.Context) error {
+func CreateUploadTask(c *echo.Context) error {
 	// cc := c.(*middleware.CustomContext)
 	r := new(models.FileInfo)
 	if err := c.Bind(r); err != nil {
@@ -24,12 +23,23 @@ func CreateUploadTask(c echo.Context) error {
 	}
 
 	if r.FileSize == 0 || r.MimeType == "" || r.FileHash == "" {
-		return utils.HTTPErrorHandler(c, errors.New("调用接口参数错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
+	}
+	fileId := u.GetFileId(r.FileHash, r.FileSize)
+	fileInfo, err := models.GetRedisFileInfo(fileId)
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
 	}
-	fileId := utils.GetFileId(r.FileHash, r.FileSize)
-	fileInfo, _ := models.GetRedisFileInfo(fileId)
 
 	if fileInfo != nil {
+		uploadPath, err := u.GetUploadDirPath()
+		if err != nil {
+			return utils.HTTPErrorHandler(c, err)
+		}
+		sliceList, err := services.GetFileSliceList(fileId, uploadPath)
+		if err != nil {
+			return utils.HTTPErrorHandler(c, err)
+		}
 		return utils.HTTPSuccessHandler(c, map[string]any{
 			"size":       fileInfo.FileSize,
 			"mime_type":  fileInfo.MimeType,
@@ -38,9 +48,10 @@ func CreateUploadTask(c echo.Context) error {
 			"expire":     fileInfo.Expire,
 			"id":         fileId,
 			"chunk_size": fileInfo.ChunkSize,
+			"chunks":     sliceList,
 		})
 	}
-	maxStorageSize, err := utils.GetFileSize(utils.GetEnv("MAX_LOCALSTORAGE_SIZE"))
+	maxStorageSize, err := u.GetFileSize(u.GetEnv("upload.maximum"))
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
@@ -58,7 +69,7 @@ func CreateUploadTask(c echo.Context) error {
 		totalSize += fileInfo.FileSize
 	}
 	if totalSize+r.FileSize > int64(maxStorageSize) {
-		return utils.HTTPErrorHandler(c, errors.New("存储空间不足"))
+		return utils.HTTPErrorHandler(c, ErrInsufficientStorage)
 	}
 
 	ChunkSize := int64(0.25 * 1024 * 1024)
@@ -66,43 +77,33 @@ func CreateUploadTask(c echo.Context) error {
 	for r.FileSize/ChunkSize > 1000 {
 		ChunkSize *= 2
 	}
-	uploadTaskExpire := int64(3600)
-	newFileInfo := models.RedisFileInfo{
-		FileType: models.FileTypeInit,
-		FileInfo: models.FileInfo{
+	redisFileInfo, err := models.SetRedisFileInfo(fileId, func(fileInfo *models.RedisFileInfo) *models.RedisFileInfo {
+		fileInfo.FileType = models.FileTypeInit
+		fileInfo.FileInfo = models.FileInfo{
 			FileSize:  r.FileSize,
 			MimeType:  r.MimeType,
 			FileHash:  r.FileHash,
 			ChunkSize: ChunkSize,
-		},
-		CreatedAt: time.Now().Unix(),
-		Expire:    uploadTaskExpire,
-	}
-	err = models.SetRedisFileInfo(fileId, newFileInfo)
-	if err != nil {
-		return utils.HTTPErrorHandler(c, err)
-	}
-
-	client := utils.GetQueueClient()
-	json, err := json.Marshal(map[string]any{
-		"file_id": fileId,
+		}
+		return fileInfo
 	})
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
-	_, err = client.Enqueue(asynq.NewTask("file:remove", json), asynq.ProcessIn(time.Duration(uploadTaskExpire)*time.Second))
+
+	err = s.SetFileRemoveTask(fileId, time.Duration(redisFileInfo.Expire)*time.Second)
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
 	return utils.HTTPSuccessHandler(c, map[string]any{
-		"size":       newFileInfo.FileSize,
-		"mime_type":  newFileInfo.MimeType,
-		"hash":       newFileInfo.FileHash,
-		"type":       newFileInfo.FileType,
-		"expire":     newFileInfo.Expire,
+		"size":       redisFileInfo.FileSize,
+		"mime_type":  redisFileInfo.MimeType,
+		"hash":       redisFileInfo.FileHash,
+		"type":       redisFileInfo.FileType,
+		"expire":     redisFileInfo.Expire,
 		"id":         fileId,
-		"chunk_size": newFileInfo.ChunkSize,
+		"chunk_size": redisFileInfo.ChunkSize,
 	})
 }
 
@@ -112,14 +113,14 @@ type UploadFileSliceProps struct {
 	FileSlice *multipart.FileHeader `form:"file"`
 }
 
-func UploadFileSlice(c echo.Context) error {
+func UploadFileSlice(c *echo.Context) error {
 	r := new(UploadFileSliceProps)
 	if err := c.Bind(r); err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
 	if r.FileId == "" || r.FileIndex == 0 || r.FileSlice == nil {
-		return utils.HTTPErrorHandler(c, errors.New("调用接口参数错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 	fileInfo, err := models.GetRedisFileInfo(r.FileId)
 	if err != nil {
@@ -128,18 +129,18 @@ func UploadFileSlice(c echo.Context) error {
 
 	now := time.Now().Unix()
 	if fileInfo.CreatedAt+fileInfo.Expire < now {
-		return utils.HTTPErrorHandler(c, errors.New("上传任务已过期"))
+		return utils.HTTPErrorHandler(c, ErrUploadTaskExpired)
 	}
 
 	if fileInfo.FileType != models.FileTypeInit {
-		return utils.HTTPErrorHandler(c, errors.New("上传任务状态错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidUploadTaskState)
 	}
 	if r.FileIndex > ((fileInfo.FileSize / fileInfo.ChunkSize) + 1) {
-		return utils.HTTPErrorHandler(c, errors.New("文件切片索引错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidFileSliceIndex)
 	}
 
 	if r.FileSlice.Size > fileInfo.ChunkSize {
-		return utils.HTTPErrorHandler(c, errors.New("文件切片大小错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidFileSliceSize)
 	}
 
 	// 打开文件
@@ -147,9 +148,14 @@ func UploadFileSlice(c echo.Context) error {
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
-	defer file.Close()
+	defer file.Close() //nolint:errcheck
 
-	if err := services.CreateFileSlice(file, r.FileId, r.FileIndex); err != nil {
+	uploadPath, err := u.GetUploadDirPath()
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	if _, err := services.CreateFileSlice(r.FileId, uploadPath, file, r.FileIndex); err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
@@ -162,14 +168,14 @@ type FinishUploadTaskProps struct {
 	FileId string `json:"id"`
 }
 
-func FinishUploadTask(c echo.Context) error {
+func FinishUploadTask(c *echo.Context) error {
 	r := new(FinishUploadTaskProps)
 	if err := c.Bind(r); err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
 	if r.FileId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("文件ID不能为空"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 
 	fileInfo, err := models.GetRedisFileInfo(r.FileId)
@@ -178,50 +184,68 @@ func FinishUploadTask(c echo.Context) error {
 	}
 
 	if fileInfo.FileType != models.FileTypeInit {
-		return utils.HTTPErrorHandler(c, errors.New("上传任务状态错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidUploadTaskState)
 	}
 
 	now := time.Now().Unix()
 	if fileInfo.CreatedAt+fileInfo.Expire < now {
-		return utils.HTTPErrorHandler(c, errors.New("上传任务已过期"))
+		return utils.HTTPErrorHandler(c, ErrUploadTaskExpired)
 	}
 
-	// 合并文件切片
-	uploadPath, _ := utils.GetUploadDirPath()
-	slicesPath := filepath.Join(uploadPath, fmt.Sprintf("%s_%s", r.FileId, "tmp"))
+	uploadPath, err := u.GetUploadDirPath()
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	fileSliceList, err := services.GetFileSliceList(r.FileId, uploadPath)
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	if len(fileSliceList) != int(math.Ceil(float64(fileInfo.FileSize)/float64(fileInfo.ChunkSize))) {
+		return utils.HTTPErrorHandler(c, ErrIncompleteFileSlices)
+	}
 
 	// 最终合并后的文件路径
-	mergeFilePath := filepath.Join(uploadPath, r.FileId)
-	if err := services.MergeFileSlices(slicesPath, mergeFilePath); err != nil {
+	mergeFilePath, err := services.MergeFileSlices(r.FileId, uploadPath)
+	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 
-	// 计算文件MD5
+	// 计算文件SHA1
 	file, err := os.Open(mergeFilePath)
 	if err != nil {
-		file.Close()
-		os.Remove(mergeFilePath)
+		return utils.HTTPErrorHandler(c, err)
+	}
+	defer file.Close() //nolint:errcheck
+
+	file_hash, err := u.GetFileSHA1(file)
+	if err != nil || file_hash != fileInfo.FileHash {
+		defer os.Remove(mergeFilePath) //nolint:errcheck
+		if err == nil {
+			return utils.HTTPErrorHandler(c, ErrFileHashMismatch)
+		}
 		return utils.HTTPErrorHandler(c, err)
 	}
 
-	file_hash, err := utils.GetFileMd5(file)
-
-	if err != nil {
-		file.Close()
-		os.Remove(mergeFilePath)
-		return utils.HTTPErrorHandler(c, err)
-	}
-
-	if file_hash != fileInfo.FileHash {
-		file.Close()
-		os.Remove(mergeFilePath)
-		return utils.HTTPErrorHandler(c, errors.New("文件MD5不一致"))
-	}
-	defer file.Close()
 	// 更新文件信息
-	models.SetRedisFileInfo(r.FileId, models.RedisFileInfo{
-		FileType: models.FileTypeUpload,
+	fileInfo, err = models.SetRedisFileInfo(r.FileId, func(fileInfo *models.RedisFileInfo) *models.RedisFileInfo {
+		fileInfo.FileType = models.FileTypeUpload
+		return fileInfo
 	})
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+	// 统计
+	currentDate := time.Now().Format("2006-01-02")
+	_, err = models.SetRedisStat(currentDate, func(stat *models.StatData) *models.StatData {
+		stat.FileSize += fileInfo.FileSize
+		stat.FileNum += 1
+		return stat
+	})
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
 
 	return utils.HTTPSuccessHandler(c, map[string]any{
 		"size":      fileInfo.FileSize,

backend/internal/controllers/share.go

@@ -1,17 +1,17 @@
 package controllers
 
 import (
-	"backend/internal/models"
 	"backend/internal/utils"
-	"backend/middleware"
 	"encoding/json"
-	"errors"
+	"pkg/models"
+	u "pkg/utils"
 	"strings"
 	"time"
 
 	"github.com/hibiken/asynq"
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 	gonanoid "github.com/matoous/go-nanoid/v2"
+	"github.com/spf13/cast"
 )
 
 type CreateShareProps struct {
@@ -23,28 +23,31 @@ type CreateShareProps struct {
 }
 
 type ShareConfig struct {
-	ExpireAt      int      `json:"expire_time"` // 分钟
-	ViewNum       int64    `json:"download_nums"`
-	HasPassword   bool     `json:"has_password"`
-	Password      string   `json:"password"`
-	HasNotify     bool     `json:"has_notify"`
-	NotifyEmail   []string `json:"notify_email"`
-	HasPickupCode bool     `json:"has_pickup_code"`
+	ExpireAt       int                    `json:"expire_time"` // 分钟
+	ViewNum        int64                  `json:"download_nums"`
+	HasPassword    bool                   `json:"has_password"`
+	Password       string                 `json:"password"`
+	HasNotify      bool                   `json:"has_notify"`
+	NotifyTypes    []string               `json:"notify_types"`
+	NotifyEmails   []string               `json:"notify_emails"`
+	NotifyWebhooks []models.NotifyWebhook `json:"notify_webhooks"`
+	Locale         string                 `json:"locale"`
+	HasPickupCode  bool                   `json:"has_pickup_code"`
 }
 
-func CreateShareInfo(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
+func CreateShareInfo(c *echo.Context) error {
+	owner, _ := echo.ContextGet[string](c, "auth")
 
 	r := new(CreateShareProps)
-	if err := cc.Bind(r); err != nil {
+	if err := c.Bind(r); err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 	if r.Config.ExpireAt < 1 {
-		return utils.HTTPErrorHandler(c, errors.New("非法的分享过期时间"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 	ExpireTime := time.Now().Add(time.Duration(r.Config.ExpireAt) * time.Minute)
 	if r.Data == "" || (r.Type != models.ShareTypeFile && r.Type != models.ShareTypeText) || ExpireTime.Before(time.Now()) || r.Config.ViewNum < 1 {
-		return utils.HTTPErrorHandler(c, errors.New("调用接口参数错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 
 	id, err := gonanoid.New()
@@ -58,10 +61,10 @@ func CreateShareInfo(c echo.Context) error {
 			return utils.HTTPErrorHandler(c, err)
 		}
 		if fileInfo == nil {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件不存在"))
+			return utils.HTTPErrorHandler(c, ErrShareFileNotFound)
 		}
 		if fileInfo.FileType != models.FileTypeUpload {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件状态错误"))
+			return utils.HTTPErrorHandler(c, ErrInvalidShareFileState)
 		}
 	}
 	password := ""
@@ -73,17 +76,45 @@ func CreateShareInfo(c echo.Context) error {
 		password = hash
 	}
 
-	models.SetRedisShareInfo(id, models.RedisShareInfo{
-		Data:      r.Data,
-		Type:      r.Type,
-		CreatedAt: time.Now().Unix(),
-		Owner:     cc.Auth.(string),
-		ViewNum:   r.Config.ViewNum,
-		Password:  password,
-		// NotifyEmail: r.Config.NotifyEmail,
-		FileName: r.FileName,
-		ExpireAt: ExpireTime.Unix(),
+	var notifyEmails []string
+	var notifyWebhooks []models.NotifyWebhook
+	if r.Config.HasNotify {
+		hasEmail, hasWebhook := false, false
+		for _, nt := range r.Config.NotifyTypes {
+			switch nt {
+			case "email":
+				hasEmail = true
+			case "webhook":
+				hasWebhook = true
+			default:
+				return utils.HTTPErrorHandler(c, ErrInvalidRequest)
+			}
+		}
+		if hasEmail {
+			notifyEmails = r.Config.NotifyEmails
+		}
+		if hasWebhook {
+			notifyWebhooks = r.Config.NotifyWebhooks
+		}
+	}
+
+	_, err = models.SetRedisShareInfo(id, func(shareInfo *models.RedisShareInfo) *models.RedisShareInfo {
+		shareInfo.Data = r.Data
+		shareInfo.Type = r.Type
+		shareInfo.CreatedAt = time.Now().Unix()
+		shareInfo.Owner = owner
+		shareInfo.ViewNum = r.Config.ViewNum
+		shareInfo.Password = password
+		shareInfo.FileName = r.FileName
+		shareInfo.NotifyEmails = notifyEmails
+		shareInfo.NotifyWebhooks = notifyWebhooks
+		shareInfo.Locale = r.Config.Locale
+		shareInfo.ExpireAt = ExpireTime.Unix()
+		return shareInfo
 	})
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
 	var pickupCode string
 	if r.Config.HasPickupCode {
 		for {
@@ -105,18 +136,34 @@ func CreateShareInfo(c echo.Context) error {
 			return utils.HTTPErrorHandler(c, err)
 		}
 		shareIDs = append(shareIDs, id)
-		models.SetRedisFileShareRelational(r.Data, shareIDs)
-		client := utils.GetQueueClient()
+		err = models.SetRedisFileShareRelational(r.Data, shareIDs)
+		if err != nil {
+			return utils.HTTPErrorHandler(c, err)
+		}
+		client := u.GetQueueClient()
 		json, err := json.Marshal(map[string]any{"share_id": id, "file_id": r.Data})
 		if err != nil {
 			return utils.HTTPErrorHandler(c, err)
 		}
-		_, err = client.Enqueue(asynq.NewTask("share:remove", json), asynq.ProcessIn(time.Duration(r.Config.ExpireAt)*time.Minute))
+		// 这里延时分享过期时间基础上加下载窗口期后1小时删除，防止用户过期前几分钟才开始下载，下载一半文件不见了
+		downloadWindow := u.GetEnvWithDefault("share.download_window", "12")
+		deleteTime := time.Duration(r.Config.ExpireAt)*time.Minute + cast.ToDuration(downloadWindow+"h") + 1*time.Hour
+		_, err = client.Enqueue(asynq.NewTask("share:remove", json), asynq.ProcessIn(deleteTime))
 		if err != nil {
 			return utils.HTTPErrorHandler(c, err)
 		}
 	}
 
+	// 统计分享数
+	currentDate := time.Now().Format("2006-01-02")
+	_, err = models.SetRedisStat(currentDate, func(stat *models.StatData) *models.StatData {
+		stat.ShareNum += 1
+		return stat
+	})
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
 	return utils.HTTPSuccessHandler(c, map[string]any{
 		"id":            id,
 		"file_name":     r.FileName,
@@ -130,11 +177,10 @@ type GetShareProps struct {
 	ShareId string `param:"id"`
 }
 
-func GetShareInfo(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-	shareId := cc.Param("id")
+func GetShareInfo(c *echo.Context) error {
+	shareId := c.Param("id")
 	if shareId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("缺少分享ID"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 
 	shareInfo, err := models.GetRedisShareInfo(shareId)
@@ -142,7 +188,7 @@ func GetShareInfo(c echo.Context) error {
 		return utils.HTTPErrorHandler(c, err)
 	}
 	if shareInfo == nil || shareInfo.ViewNum < 1 {
-		return utils.HTTPErrorHandler(c, errors.New("分享不存在"))
+		return utils.HTTPErrorHandler(c, ErrShareNotFound)
 	}
 
 	if shareInfo.Type == models.ShareTypeFile {
@@ -151,10 +197,10 @@ func GetShareInfo(c echo.Context) error {
 			return utils.HTTPErrorHandler(c, err)
 		}
 		if fileInfo == nil {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件不存在"))
+			return utils.HTTPErrorHandler(c, ErrShareFileNotFound)
 		}
 		if fileInfo.FileType != models.FileTypeUpload {
-			return utils.HTTPErrorHandler(c, errors.New("分享文件状态错误"))
+			return utils.HTTPErrorHandler(c, ErrInvalidShareFileState)
 		}
 		return utils.HTTPSuccessHandler(c, map[string]any{
 			"id":            shareId,
@@ -180,18 +226,17 @@ func GetShareInfo(c echo.Context) error {
 	})
 }
 
-func GetShareByPickupCode(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-	pickupCode := cc.Param("code")
+func GetShareByPickupCode(c *echo.Context) error {
+	pickupCode := c.Param("code")
 	if pickupCode == "" {
-		return utils.HTTPErrorHandler(c, errors.New("缺少提取码"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 	shareId, err := models.GetRedisPickupData(strings.ToUpper(pickupCode))
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
 	if shareId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("分享不存在"))
+		return utils.HTTPErrorHandler(c, ErrShareNotFound)
 	}
 	return utils.HTTPSuccessHandler(c, map[string]any{
 		"share_id": shareId,

backend/internal/controllers/stat.go

@@ -1,102 +1,75 @@
 package controllers
 
 import (
-	"backend/internal/models"
 	"backend/internal/utils"
 	"encoding/json"
-	"time"
+	"pkg/models"
+	u "pkg/utils"
 
-	"github.com/hibiken/asynq"
-	"github.com/labstack/echo/v4"
-	"github.com/samber/lo"
-	"github.com/spf13/cast"
+	"github.com/labstack/echo/v5"
 )
 
-type FileChartData struct {
-	FileSize int64  `json:"file_size"`
-	FileNum  int64  `json:"file_num"`
-	Date     string `json:"date"`
+const (
+	DateLayout       = "2006-01-02"
+	DaysToAnalyze    = 30
+	QueueHistoryDays = 30
+)
+
+type StatChartData struct {
+	FileSize    int64 `json:"file_size"`
+	FileNum     int64 `json:"file_num"`
+	ShareNum    int64 `json:"share_num"`
+	DownloadNum int64 `json:"download_num"`
 }
 
-func GetStat(c echo.Context) error {
-	fileInfoMap, err := models.GetRedisFileInfoAll()
+type QueueChartData struct {
+	Processed int `json:"processed"`
+	Failed    int `json:"failed"`
+}
+
+func GetStat(c *echo.Context) error {
+	statInfoMap, err := models.GetRedisStatAll()
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
-	fileChartData := make(map[string]FileChartData)
-	for _, value := range fileInfoMap {
-		var fileInfo models.RedisFileInfo
-		err := json.Unmarshal([]byte(value), &fileInfo)
+
+	statChartData := make(map[string]StatChartData)
+	for key, value := range statInfoMap {
+		var statData models.StatData
+		err := json.Unmarshal([]byte(value), &statData)
 		if err != nil {
 			return utils.HTTPErrorHandler(c, err)
 		}
-		if fileInfo.FileType != models.FileTypeUpload {
+		statChartData[key] = StatChartData{
+			FileSize:    statData.FileSize,
+			FileNum:     statData.FileNum,
+			ShareNum:    statData.ShareNum,
+			DownloadNum: statData.DownloadNum,
+		}
+	}
+
+	queueInspector := u.GetQueueInspector()
+	queues, err := queueInspector.History("default", QueueHistoryDays)
+	if err != nil {
+		return utils.HTTPErrorHandler(c, err)
+	}
+
+	queuesChartData := make(map[string]QueueChartData)
+	for _, item := range queues {
+		dateKey := item.Date.Format(DateLayout)
+		if item.Processed == 0 && item.Failed == 0 {
 			continue
 		}
-		if time.Unix(fileInfo.CreatedAt, 0).After(time.Now().Add(-30 * 24 * time.Hour)) {
-			dateKey := time.Unix(fileInfo.CreatedAt, 0).Format("2006-01-02")
-			if data, ok := fileChartData[dateKey]; ok {
-				fileChartData[dateKey] = FileChartData{
-					FileSize: data.FileSize + fileInfo.FileSize,
-					FileNum:  data.FileNum + 1,
-				}
-			} else {
-				fileChartData[dateKey] = FileChartData{
-					FileSize: fileInfo.FileSize,
-					FileNum:  1,
-				}
-			}
+		queuesChartData[dateKey] = QueueChartData{
+			Processed: item.Processed,
+			Failed:    item.Failed,
 		}
 	}
-	storageChartData := lo.Times(30, func(i int) FileChartData {
-		dateKey := time.Now().AddDate(0, 0, -i).Format("2006-01-02")
-		if data, ok := fileChartData[dateKey]; ok {
-			return FileChartData{
-				FileSize: data.FileSize,
-				FileNum:  data.FileNum,
-				Date:     dateKey,
-			}
-		}
-		return FileChartData{
-			FileSize: 0,
-			FileNum:  0,
-			Date:     dateKey,
-		}
-	})
-
-	queueInspector := utils.GetQueueInspector()
-	queues, err := queueInspector.History("default", 30)
-	if err != nil {
-		return utils.HTTPErrorHandler(c, err)
-	}
-
-	maxStorageSize, err := utils.GetFileSize(utils.GetEnv("MAX_LOCALSTORAGE_SIZE"))
-	if err != nil {
-		return utils.HTTPErrorHandler(c, err)
-	}
-
-	queueData := lo.Map(queues, func(item *asynq.DailyStats, _ int) map[string]any {
-		return map[string]any{
-			"date":      item.Date.Format("2006-01-02"),
-			"processed": item.Processed,
-			"failed":    item.Failed,
-		}
-	})
 
 	return utils.HTTPSuccessHandler(c, map[string]any{
-		"version":    utils.GetEnvWithDefault("VERSION", "dev"),
-		"build_time": cast.ToInt(utils.GetEnvWithDefault("BUILD_TIME", cast.ToString(time.Now().Unix()))),
-		"max_limit": map[string]any{
-			"file_size": maxStorageSize,
-		},
-		"admin": map[string]any{
-			"name":  utils.GetEnv("ADMIN_NAME"),
-			"email": utils.GetEnv("ADMIN_EMAIL"),
-			"url":   utils.GetEnv("ADMIN_URL"),
-		},
 		"chart": map[string]any{
-			"storage": storageChartData,
-			"queue":   queueData,
+			"storage": statChartData,
+			"queue":   queuesChartData,
 		},
 	})
 }

backend/internal/controllers/task.go

@@ -1,38 +1,37 @@
 package controllers
 
 import (
-	"backend/internal/models"
+	"backend/internal/controllers/task"
 	"backend/internal/utils"
-	"backend/middleware"
-	"encoding/json"
-	"errors"
+	"pkg/models"
+	u "pkg/utils"
 
 	"github.com/hibiken/asynq"
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 )
 
-type GenCompressImageRequest struct {
-	FileId string `json:"file_id"`
+var handleTaskMap = map[string]func(c *echo.Context) ([]byte, error){
+	"image:compress": task.HandleImageCompress,
+	"image:convert":  task.HandleImageConvert,
+	"text:translate": task.HandleTextTranslate,
 }
 
-func GenCompressImage(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-	r := new(GenCompressImageRequest)
-	if err := cc.Bind(r); err != nil {
-		return utils.HTTPErrorHandler(c, err)
+func CreateTask(c *echo.Context) error {
+	taskType := c.Param("type")
+	if taskType == "" {
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
-
-	if r.FileId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("调用接口参数错误"))
+	handleTask, ok := handleTaskMap[taskType]
+	if !ok {
+		return utils.HTTPErrorHandler(c, ErrTaskNotFound)
 	}
-	client := utils.GetQueueClient()
-	json, err := json.Marshal(map[string]any{
-		"file_id": r.FileId,
-	})
+	json, err := handleTask(c)
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
-	info, err := client.Enqueue(asynq.NewTask("image:compress", json), asynq.MaxRetry(3))
+
+	client := u.GetQueueClient()
+	info, err := client.Enqueue(asynq.NewTask(taskType, json), asynq.MaxRetry(3))
 	if err != nil {
 		return utils.HTTPErrorHandler(c, err)
 	}
@@ -42,11 +41,10 @@ func GenCompressImage(c echo.Context) error {
 	})
 }
 
-func GetCompressImage(c echo.Context) error {
-	cc := c.(*middleware.CustomContext)
-	taskId := cc.Param("id")
+func GetTask(c *echo.Context) error {
+	taskId := c.Param("id")
 	if taskId == "" {
-		return utils.HTTPErrorHandler(c, errors.New("调用接口参数错误"))
+		return utils.HTTPErrorHandler(c, ErrInvalidRequest)
 	}
 
 	taskInfo, err := models.GetRedisTaskInfo(taskId)
@@ -54,11 +52,11 @@ func GetCompressImage(c echo.Context) error {
 		return utils.HTTPErrorHandler(c, err)
 	}
 	if taskInfo == nil {
-		client := utils.GetQueueInspector()
+		client := u.GetQueueInspector()
 
 		queneTaskInfo, err := client.GetTaskInfo("default", taskId)
 		if err != nil {
-			return utils.HTTPErrorHandler(c, errors.New("任务已过期"))
+			return utils.HTTPErrorHandler(c, ErrTaskExpired)
 		}
 		stateMap := map[asynq.TaskState]string{
 			asynq.TaskStateActive:    "processing",

backend/internal/controllers/task/errors.go

@@ -0,0 +1,7 @@
+package task
+
+import "errors"
+
+var (
+	ErrInvalidRequest = errors.New("InvalidRequest")
+)

backend/internal/controllers/task/image.go

@@ -0,0 +1,53 @@
+package task
+
+import (
+	"encoding/json"
+
+	"github.com/labstack/echo/v5"
+)
+
+type BaseImageRequest struct {
+	FileId string `json:"file_id"`
+}
+
+func HandleImageCompress(c *echo.Context) ([]byte, error) {
+	r := new(BaseImageRequest)
+	if err := c.Bind(r); err != nil {
+		return nil, err
+	}
+	if r.FileId == "" {
+		return nil, ErrInvalidRequest
+	}
+	json, err := json.Marshal(map[string]any{
+		"file_id": r.FileId,
+	})
+	if err != nil {
+		return nil, err
+	}
+
+	return json, nil
+}
+
+type ImageConvertRequest struct {
+	BaseImageRequest
+	TargetExt string `json:"target_ext"`
+}
+
+func HandleImageConvert(c *echo.Context) ([]byte, error) {
+	r := new(ImageConvertRequest)
+	if err := c.Bind(r); err != nil {
+		return nil, err
+	}
+	if r.FileId == "" || r.TargetExt == "" {
+		return nil, ErrInvalidRequest
+	}
+	json, err := json.Marshal(map[string]any{
+		"file_id":    r.FileId,
+		"target_ext": r.TargetExt,
+	})
+	if err != nil {
+		return nil, err
+	}
+
+	return json, nil
+}

backend/internal/controllers/task/text.go

@@ -0,0 +1,45 @@
+package task
+
+import (
+	"encoding/json"
+
+	"github.com/labstack/echo/v5"
+)
+
+var validProviders = map[string]bool{
+	"google":    true,
+	"microsoft": true,
+	"deeplx":    true,
+	"deepseek":  true,
+}
+
+var validSources = map[string]bool{
+	"auto":  true,
+	"zh-CN": true,
+	"en":    true,
+	"ja":    true,
+	"ko":    true,
+}
+
+type TranslateTextRequest struct {
+	Text     string `json:"text"`
+	Source   string `json:"source"`
+	Target   string `json:"target"`
+	Provider string `json:"provider"`
+}
+
+func HandleTextTranslate(c *echo.Context) ([]byte, error) {
+	r := new(TranslateTextRequest)
+	if err := c.Bind(r); err != nil {
+		return nil, err
+	}
+	if r.Text == "" || r.Target == "" || !validProviders[r.Provider] || !validSources[r.Source] {
+		return nil, ErrInvalidRequest
+	}
+	return json.Marshal(map[string]any{
+		"text":     r.Text,
+		"source":   r.Source,
+		"target":   r.Target,
+		"provider": r.Provider,
+	})
+}

backend/internal/models/file.go

@@ -1,65 +0,0 @@
-package models
-
-import (
-	"backend/internal/utils"
-	"encoding/json"
-
-	"dario.cat/mergo"
-	"github.com/redis/go-redis/v9"
-)
-
-type FileInfo struct {
-	FileSize  int64  `json:"size"`
-	MimeType  string `json:"mime_type"`
-	FileHash  string `json:"hash"`
-	ChunkSize int64  `json:"chunk_size"`
-}
-
-type FileType string
-
-const (
-	FileTypeInit   FileType = "init"
-	FileTypeUpload FileType = "already"
-)
-
-type RedisFileInfo struct {
-	FileInfo
-	FileType  FileType `json:"type"`
-	CreatedAt int64    `json:"created_at"`
-	Expire    int64    `json:"expire"` // 只有上传文件(init)的时候有这个字段
-}
-
-func GetRedisFileInfo(fileId string) (*RedisFileInfo, error) {
-	rdb, ctx := utils.GetRedisClient()
-	fileInfoUnmarshalData, err := rdb.HGet(ctx, "015:fileInfoMap", fileId).Result()
-	if err == redis.Nil {
-		return nil, nil
-	}
-	if err != nil {
-		return nil, err
-	}
-	var fileInfoData RedisFileInfo
-	if err := json.Unmarshal([]byte(fileInfoUnmarshalData), &fileInfoData); err != nil {
-		return nil, err
-	}
-	return &fileInfoData, nil
-}
-
-func SetRedisFileInfo(fileId string, fileInfo RedisFileInfo) error {
-	rdb, ctx := utils.GetRedisClient()
-	old_fileInfo, err := GetRedisFileInfo(fileId)
-	if err != nil {
-		return err
-	}
-	if old_fileInfo != nil {
-		mergo.Merge(&fileInfo, old_fileInfo)
-	}
-	jsonData, _ := json.Marshal(fileInfo)
-	_, err = rdb.HSet(ctx, "015:fileInfoMap", fileId, string(jsonData)).Result()
-	return err
-}
-
-func GetRedisFileInfoAll() (map[string]string, error) {
-	rdb, ctx := utils.GetRedisClient()
-	return rdb.HGetAll(ctx, "015:fileInfoMap").Result()
-}

backend/internal/models/file_share_relational.go

@@ -1,31 +0,0 @@
-package models
-
-import (
-	"backend/internal/utils"
-	"encoding/json"
-
-	"github.com/redis/go-redis/v9"
-)
-
-func GetRedisFileShareRelational(fileId string) ([]string, error) {
-	rdb, ctx := utils.GetRedisClient()
-	fileShareRelationalUnmarshalData, err := rdb.HGet(ctx, "015:fileShareRelational", fileId).Result()
-	if err == redis.Nil {
-		return nil, nil
-	}
-	if err != nil {
-		return nil, err
-	}
-	var shareIDs []string
-	if err := json.Unmarshal([]byte(fileShareRelationalUnmarshalData), &shareIDs); err != nil {
-		return nil, err
-	}
-	return shareIDs, nil
-}
-
-func SetRedisFileShareRelational(fileId string, shareIDs []string) error {
-	rdb, ctx := utils.GetRedisClient()
-	jsonData, _ := json.Marshal(shareIDs)
-	_, err := rdb.HSet(ctx, "015:fileShareRelational", fileId, string(jsonData)).Result()
-	return err
-}

backend/internal/models/pickupcode.go

@@ -1,27 +0,0 @@
-package models
-
-import (
-	"backend/internal/utils"
-	"fmt"
-	"time"
-
-	"github.com/redis/go-redis/v9"
-)
-
-func GetRedisPickupData(pickupCode string) (string, error) {
-	rdb, ctx := utils.GetRedisClient()
-	ShareId, err := rdb.Get(ctx, fmt.Sprintf("015:pickupCode:%s", pickupCode)).Result()
-	if err == redis.Nil {
-		return "", nil
-	}
-	if err != nil {
-		return "", err
-	}
-	return ShareId, nil
-}
-
-func SetRedisPickupData(pickupCode string, shareId string) (bool, error) {
-	rdb, ctx := utils.GetRedisClient()
-	ok, err := rdb.SetNX(ctx, fmt.Sprintf("015:pickupCode:%s", pickupCode), shareId, time.Until(time.Now().Add(24*time.Hour))).Result()
-	return ok, err
-}

backend/internal/models/share.go

@@ -1,66 +0,0 @@
-package models
-
-import (
-	"backend/internal/utils"
-	"encoding/json"
-	"fmt"
-	"time"
-
-	"dario.cat/mergo"
-	"github.com/redis/go-redis/v9"
-)
-
-type RedisShareInfo struct {
-	// Id          string    `json:"id"`
-	CreatedAt   int64     `json:"created_at"`
-	Owner       string    `json:"owner"`
-	Type        ShareType `json:"type"`
-	Data        string    `json:"data"` // 分享数据 文件分享为文件id 文本分享为文本内容
-	ExpireAt    int64     `json:"expire_time"`
-	ViewNum     int64     `json:"download_nums"`
-	Password    string    `json:"password"`
-	NotifyEmail []string  `json:"notify_email"`
-	FileName    string    `json:"file_name"`
-	// PickupCode  bool      `json:"pickup_code"`
-}
-
-type ShareType string
-
-const (
-	ShareTypeFile ShareType = "file"
-	ShareTypeText ShareType = "text"
-)
-
-func GetRedisShareInfo(shareId string) (*RedisShareInfo, error) {
-	rdb, ctx := utils.GetRedisClient()
-	shareInfo := rdb.Get(ctx, fmt.Sprintf("015:shareInfoMap:%s", shareId))
-	shareInfoUnmarshalData, err := shareInfo.Result()
-	ttl, _ := rdb.TTL(ctx, fmt.Sprintf("015:shareInfoMap:%s", shareId)).Result()
-	if err == redis.Nil {
-		return nil, nil
-	}
-	if err != nil {
-		return nil, err
-	}
-	var shareInfoData RedisShareInfo
-
-	if err := json.Unmarshal([]byte(shareInfoUnmarshalData), &shareInfoData); err != nil {
-		return nil, err
-	}
-	shareInfoData.ExpireAt = time.Now().Add(ttl).Unix()
-	return &shareInfoData, nil
-}
-
-func SetRedisShareInfo(shareId string, shareInfo RedisShareInfo) error {
-	rdb, ctx := utils.GetRedisClient()
-	old_shareInfo, err := GetRedisShareInfo(shareId)
-	if err != nil {
-		return err
-	}
-	if old_shareInfo != nil {
-		mergo.Merge(&shareInfo, old_shareInfo)
-	}
-	jsonData, _ := json.Marshal(shareInfo)
-	_, err = rdb.Set(ctx, fmt.Sprintf("015:shareInfoMap:%s", shareId), string(jsonData), time.Until(time.Unix(shareInfo.ExpireAt, 0))).Result()
-	return err
-}

backend/internal/models/task.go

@@ -1,35 +0,0 @@
-package models
-
-import (
-	"backend/internal/utils"
-	"encoding/json"
-	"fmt"
-	"time"
-
-	"github.com/redis/go-redis/v9"
-)
-
-func GetRedisTaskInfo(taskId string) (*map[string]any, error) {
-	rdb, ctx := utils.GetRedisClient()
-	taskInfo := rdb.Get(ctx, fmt.Sprintf("015:taskInfoMap:%s", taskId))
-	taskInfoUnmarshalData, err := taskInfo.Result()
-	if err == redis.Nil {
-		return nil, nil
-	}
-	if err != nil {
-		return nil, err
-	}
-	var taskInfoData map[string]any
-
-	if err := json.Unmarshal([]byte(taskInfoUnmarshalData), &taskInfoData); err != nil {
-		return nil, err
-	}
-	return &taskInfoData, nil
-}
-
-func SetRedisTaskInfo(taskId string, taskInfo map[string]any) error {
-	rdb, ctx := utils.GetRedisClient()
-	jsonData, _ := json.Marshal(taskInfo)
-	_, err := rdb.Set(ctx, fmt.Sprintf("015:taskInfoMap:%s", taskId), jsonData, time.Hour).Result()
-	return err
-}

backend/internal/services/file.go

@@ -1,89 +1,84 @@
 package services
 
 import (
-	"backend/internal/utils"
 	"fmt"
 	"io"
 	"os"
 	"path/filepath"
+	"sort"
 	"strconv"
 )
 
-func CreateFileSlice(fileSlice io.Reader, fileId string, fileIndex int64) error {
-	uploadPath, err := utils.GetUploadDirPath()
-	if err != nil {
-		return err
-	}
-
+func CreateFileSlice(fileId string, uploadPath string, fileSlice io.Reader, fileIndex int64) (string, error) {
 	filePath := filepath.Join(uploadPath, fmt.Sprintf("%s_%s", fileId, "tmp"))
 	if err := os.MkdirAll(filePath, 0755); err != nil {
-		return err
+		return "", err
 	}
 
 	dst, err := os.Create(filepath.Join(filePath, fmt.Sprintf("%d", fileIndex)))
 	if err != nil {
-		return err
+		return "", err
 	}
-	defer dst.Close()
+	defer dst.Close() //nolint:errcheck
 
 	if _, err = io.Copy(dst, fileSlice); err != nil {
-		return err
+		return "", err
 	}
 
-	return nil
+	return filePath, nil
 }
 
-// MergeFileSlices 合并文件切片
-func MergeFileSlices(slicesPath string, mergeFilePath string) error {
-	// 创建最终文件
-	destFile, err := os.Create(mergeFilePath)
-	if err != nil {
-		return fmt.Errorf("创建合并文件失败: %v", err)
-	}
-	defer destFile.Close()
-
-	// 读取目录下的所有文件
+func GetFileSliceList(fileId string, uploadPath string) ([]int, error) {
+	slicesPath := filepath.Join(uploadPath, fmt.Sprintf("%s_%s", fileId, "tmp"))
 	files, err := os.ReadDir(slicesPath)
-	if err != nil {
-		return fmt.Errorf("读取切片目录失败: %v", err)
+	if err != nil && !os.IsNotExist(err) {
+		return nil, fmt.Errorf("读取切片目录失败: %v", err)
 	}
-
-	// 按照索引排序文件切片
-	sliceFiles := make([]string, len(files))
+	fileSliceList := []int{}
 	for _, file := range files {
 		index, err := strconv.Atoi(file.Name())
 		if err != nil {
-			return fmt.Errorf("无效的切片文件名: %v", err)
+			return nil, fmt.Errorf("无效的切片文件名: %v", err)
 		}
-		sliceFiles[index-1] = filepath.Join(slicesPath, file.Name())
+		fileSliceList = append(fileSliceList, index)
+	}
+	sort.Ints(fileSliceList)
+	return fileSliceList, nil
+}
+
+// MergeFileSlices 合并文件切片
+func MergeFileSlices(fileId string, uploadPath string) (string, error) {
+	mergeFilePath := filepath.Join(uploadPath, fileId)
+	slicesPath := filepath.Join(uploadPath, fmt.Sprintf("%s_%s", fileId, "tmp"))
+	defer os.RemoveAll(slicesPath) //nolint:errcheck
+	// 创建最终文件
+	destFile, err := os.Create(mergeFilePath)
+	if err != nil {
+		return "", fmt.Errorf("创建合并文件失败: %v", err)
+	}
+	defer destFile.Close() //nolint:errcheck
+
+	fileSliceList, err := GetFileSliceList(fileId, uploadPath)
+	if err != nil {
+		return "", err
 	}
 
 	// 合并文件
 	buffer := make([]byte, 4*1024*1024) // 4MB buffer
-	for _, sliceFile := range sliceFiles {
-		sf, err := os.Open(sliceFile)
+	for _, index := range fileSliceList {
+		sliceFilePath := filepath.Join(slicesPath, fmt.Sprintf("%d", index))
+		sf, err := os.Open(sliceFilePath)
 		if err != nil {
-			return fmt.Errorf("打开切片文件失败: %v", err)
+			return "", fmt.Errorf("打开切片文件失败: %v", err)
 		}
 
-		for {
-			n, err := sf.Read(buffer)
-			if err == io.EOF {
-				break
-			}
-			if err != nil {
-				sf.Close()
-				return fmt.Errorf("读取切片文件失败: %v", err)
-			}
-
-			if _, err := destFile.Write(buffer[:n]); err != nil {
-				sf.Close()
-				return fmt.Errorf("写入合并文件失败: %v", err)
-			}
+		if _, err := io.CopyBuffer(destFile, sf, buffer); err != nil {
+			sf.Close() //nolint:errcheck
+			return "", fmt.Errorf("合并切片文件失败: %v", err)
+		}
+		if err := sf.Close(); err != nil {
+			return "", fmt.Errorf("关闭切片文件失败: %v", err)
 		}
-
-		sf.Close()
 	}
-	defer os.RemoveAll(slicesPath)
-	return nil
+	return mergeFilePath, nil
 }

backend/internal/utils/asyncq.go

@@ -1,21 +0,0 @@
-package utils
-
-import "github.com/hibiken/asynq"
-
-func GetQueueClient() *asynq.Client {
-	opt := RedisURI2AsynqOpt(GetEnv("REDIS_URL"))
-	return asynq.NewClient(opt)
-}
-
-func GetQueueInspector() *asynq.Inspector {
-	opt := RedisURI2AsynqOpt(GetEnv("REDIS_URL"))
-	return asynq.NewInspector(opt)
-}
-
-func RedisURI2AsynqOpt(uri string) asynq.RedisConnOpt {
-	opt, err := asynq.ParseRedisURI(GetEnv("REDIS_URL"))
-	if err != nil {
-		panic(err)
-	}
-	return opt
-}

backend/internal/utils/env.go

@@ -1,42 +0,0 @@
-package utils
-
-import (
-	"github.com/spf13/viper"
-)
-
-var v *viper.Viper
-
-func init() {
-	InitEnv()
-}
-
-func InitEnv() {
-	if v != nil {
-		return
-	}
-	v = viper.New()
-	v.SetConfigName(".env")
-	v.SetConfigType("env")
-	v.AddConfigPath(".")
-	v.AddConfigPath("../")
-	v.AutomaticEnv()
-	if err := v.ReadInConfig(); err != nil {
-		if _, ok := err.(viper.ConfigFileNotFoundError); !ok {
-			// 只有当错误不是"配置文件未找到"时才 panic
-			panic(err)
-		}
-	}
-}
-
-func GetEnv(key string) string {
-	InitEnv()
-	return v.GetString(key)
-}
-
-func GetEnvWithDefault(key string, defaultValue string) string {
-	value := v.GetString(key)
-	if value == "" {
-		return defaultValue
-	}
-	return value
-}

backend/internal/utils/file.go

@@ -1,53 +0,0 @@
-package utils
-
-import (
-	"bufio"
-	"crypto/md5"
-	"fmt"
-	"io"
-	"os"
-	"path/filepath"
-
-	humanize "github.com/dustin/go-humanize"
-)
-
-func GetFileId(fileHash string, fileSize int64) string {
-	return fmt.Sprintf("%s_%d", fileHash, fileSize)
-}
-
-func GetFileMd5(file io.Reader) (string, error) {
-
-	const bufferSize = 1024 * 1000 // 1MB
-
-	hash := md5.New()
-	for buf, reader := make([]byte, bufferSize), bufio.NewReader(file); ; {
-		n, err := reader.Read(buf)
-		if err != nil {
-			if err == io.EOF {
-				break
-			}
-			return "", err
-		}
-
-		hash.Write(buf[:n])
-	}
-
-	return fmt.Sprintf("%x", hash.Sum(nil)), nil
-}
-
-func GetUploadDirPath() (string, error) {
-	basepath, err := os.Getwd()
-	if err != nil {
-		return "", err
-	}
-	finalPath := filepath.Join(basepath, "uploads")
-	uploadPath := GetEnvWithDefault("UPLOAD_PATH", finalPath)
-	if err := os.MkdirAll(uploadPath, 0755); err != nil {
-		return "", err
-	}
-	return uploadPath, nil
-}
-
-func GetFileSize(size string) (uint64, error) {
-	return humanize.ParseBytes(size)
-}

backend/internal/utils/http_result.go

@@ -3,43 +3,39 @@ package utils
 import (
 	"net/http"
 
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 )
 
-type Option interface {
-	applyTo(*HTTPBaseResponse)
-}
-
 type HTTPBaseResponse struct {
 	code    int
 	message string
 	data    map[string]any
 }
 
-type HTTPBaseResponseProps func(props *HTTPBaseResponse) error
+type HTTPBaseResponseProps func(props *HTTPBaseResponse)
 
-type WithCode int
-
-func (o WithCode) applyTo(props *HTTPBaseResponse) {
-	props.code = int(o)
+func WithCode(data int) HTTPBaseResponseProps {
+	return func(props *HTTPBaseResponse) {
+		props.code = data
+	}
 }
 
-type WithMessage string
-
-func (o WithMessage) applyTo(props *HTTPBaseResponse) {
-	props.message = string(o)
+func WithMessage(data string) HTTPBaseResponseProps {
+	return func(props *HTTPBaseResponse) {
+		props.message = data
+	}
 }
 
-type WithData map[string]any
-
-func (o WithData) applyTo(props *HTTPBaseResponse) {
-	props.data = o
+func WithData(data map[string]any) HTTPBaseResponseProps {
+	return func(props *HTTPBaseResponse) {
+		props.data = data
+	}
 }
 
-func HTTPBaseHandler(c echo.Context, options ...Option) error {
+func HTTPBaseHandler(c *echo.Context, options ...HTTPBaseResponseProps) error {
 	props := HTTPBaseResponse{code: http.StatusOK, message: "success", data: map[string]any{}}
 	for _, option := range options {
-		option.applyTo(&props)
+		option(&props)
 	}
 
 	return c.JSON(props.code, map[string]any{
@@ -49,10 +45,12 @@ func HTTPBaseHandler(c echo.Context, options ...Option) error {
 	})
 }
 
-func HTTPSuccessHandler(c echo.Context, data map[string]any, options ...HTTPBaseResponseProps) error {
-	return HTTPBaseHandler(c, WithData(data))
+func HTTPSuccessHandler(c *echo.Context, data map[string]any, options ...HTTPBaseResponseProps) error {
+	options = append([]HTTPBaseResponseProps{WithData(data)}, options...)
+	return HTTPBaseHandler(c, options...)
 }
 
-func HTTPErrorHandler(c echo.Context, err error, options ...HTTPBaseResponseProps) error {
-	return HTTPBaseHandler(c, WithMessage(err.Error()), WithCode(http.StatusBadRequest))
+func HTTPErrorHandler(c *echo.Context, err error, options ...HTTPBaseResponseProps) error {
+	options = append([]HTTPBaseResponseProps{WithMessage(err.Error()), WithCode(http.StatusBadRequest)}, options...)
+	return HTTPBaseHandler(c, options...)
 }

backend/internal/utils/password.go

@@ -3,14 +3,19 @@ package utils
 import (
 	"errors"
 	"fmt"
+	"pkg/utils"
 
 	"golang.org/x/crypto/argon2"
 )
 
+var (
+	ErrPasswordSaltNotSet = errors.New("PasswordSaltNotSet")
+)
+
 func GeneratePasswordHash(password string) (string, error) {
-	salt := GetEnv("PASSWORD_SALT")
+	salt := utils.GetEnv("share.password_salt")
 	if salt == "" {
-		return "", errors.New("请配置PASSWORD_SALT")
+		return "", ErrPasswordSaltNotSet
 	}
 	hash := argon2.IDKey([]byte(password), []byte(salt), 1, 64*1024, 4, 32)
 	return fmt.Sprintf("%x", hash), nil

backend/internal/utils/redis.go

@@ -1,22 +0,0 @@
-package utils
-
-import (
-	"context"
-
-	"github.com/redis/go-redis/v9"
-)
-
-var rdb *redis.Client = InitRedis()
-var ctx = context.Background()
-
-func InitRedis() *redis.Client {
-	opt, err := redis.ParseURL(GetEnv("REDIS_URL"))
-	if err != nil {
-		panic(err)
-	}
-	return redis.NewClient(opt)
-}
-
-func GetRedisClient() (*redis.Client, context.Context) {
-	return rdb, ctx
-}

backend/internal/utils/session.go

@@ -0,0 +1,16 @@
+package utils
+
+import (
+	"fmt"
+
+	"github.com/gorilla/sessions"
+	"github.com/labstack/echo/v5"
+)
+
+func GetSession(c *echo.Context, name string) (*sessions.Session, error) {
+	store, err := echo.ContextGet[sessions.Store](c, "_session_store")
+	if err != nil {
+		return nil, fmt.Errorf("failed to get session store: %w", err)
+	}
+	return store.Get(c.Request(), name)
+}

backend/main.go

@@ -1,44 +1,42 @@
 package main
 
 import (
-	"backend/internal/controllers"
-	"backend/internal/utils"
-	"backend/middleware"
+	"fmt"
+	"pkg/utils"
 
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 	"go.uber.org/zap"
 )
 
 func main() {
 	// 日志
 	var logger *zap.Logger
-	if utils.GetEnvWithDefault("NODE_ENV", "production") == "production" {
+	if utils.GetEnvWithDefault("node.env", "production") == "production" {
 		logger, _ = zap.NewProduction()
 	} else {
 		logger, _ = zap.NewDevelopment()
 	}
-	defer logger.Sync()
+	defer logger.Sync() //nolint:errcheck
 	zap.ReplaceGlobals(logger)
+	// redis
+	if err := utils.InitRedis(); err != nil {
+		logger.Fatal("redis init failed", zap.Error(err))
+		panic(err)
+	}
+	if err := utils.InitAsynq(); err != nil {
+		logger.Fatal("asynq init failed", zap.Error(err))
+		panic(err)
+	}
 
 	e := echo.New()
-	e.Use(middleware.ContextMiddleware())
-	e.Use(middleware.SessionMiddleware())
-	e.Use(middleware.AuthMiddleware())
-	e.Use(middleware.RateLimiterMiddleware())
-	e.Use(middleware.LoggerMiddleware())
+	for _, middleware := range middlewares {
+		e.Use(middleware())
+	}
 
-	e.POST("/file/create", controllers.CreateUploadTask)
-	e.POST("/file/slice", controllers.UploadFileSlice)
-	e.POST("/file/finish", controllers.FinishUploadTask)
-	e.GET("/share/:id", controllers.GetShareInfo)
-	e.POST("/share", controllers.CreateShareInfo)
-	e.GET("/download", controllers.DownloadShare)
-	e.POST("/download", controllers.VaildateShare)
-	e.GET("/share/pickup/:code", controllers.GetShareByPickupCode)
-
-	e.POST("/image/compress", controllers.GenCompressImage)
-	e.GET("/image/compress/:id", controllers.GetCompressImage)
-
-	e.GET("/stat", controllers.GetStat)
-	e.Logger.Fatal(e.Start(":1323"))
+	for _, route := range routes {
+		e.Match(route.Method, route.Path, route.Handler)
+	}
+	if err := e.Start(fmt.Sprintf(":%s", utils.GetEnvWithDefault("api.port", "5001"))); err != nil {
+		logger.Fatal("server failed", zap.Error(err))
+	}
 }

backend/middleware.go

@@ -0,0 +1,14 @@
+package main
+
+import (
+	"backend/middleware"
+
+	"github.com/labstack/echo/v5"
+)
+
+var middlewares = []func() echo.MiddlewareFunc{
+	middleware.SessionMiddleware,
+	middleware.AuthMiddleware,
+	middleware.RateLimiterMiddleware,
+	middleware.LoggerMiddleware,
+}

backend/middleware/auth.go

@@ -1,17 +1,18 @@
 package middleware
 
 import (
+	"backend/internal/utils"
+
 	"github.com/gorilla/sessions"
-	"github.com/labstack/echo-contrib/session"
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 	gonanoid "github.com/matoous/go-nanoid/v2"
 )
 
 // CustomMiddleware 创建自定义中间件
 func AuthMiddleware() echo.MiddlewareFunc {
 	return func(next echo.HandlerFunc) echo.HandlerFunc {
-		return func(c echo.Context) error {
-			sess, err := session.Get("session", c)
+		return func(c *echo.Context) error {
+			sess, err := utils.GetSession(c, "session")
 			if err != nil {
 				return err
 			}
@@ -30,11 +31,8 @@ func AuthMiddleware() echo.MiddlewareFunc {
 					return err
 				}
 			}
-
-			cc := c.(*CustomContext)
-			cc.Auth = sess.Values["auth"]
-			// 将自定义上下文传递给下一个处理器
-			return next(cc)
+			c.Set("auth", sess.Values["auth"])
+			return next(c)
 		}
 	}
 }

backend/middleware/context.go

@@ -1,28 +0,0 @@
-package middleware
-
-import (
-	"github.com/labstack/echo/v4"
-)
-
-// CustomContext 扩展 echo.Context 以添加自定义功能
-type CustomContext struct {
-	echo.Context
-	Auth interface{}
-}
-
-// NewCustomContext 创建自定义上下文的构造函数
-func NewCustomContext(c echo.Context) *CustomContext {
-	return &CustomContext{
-		Context: c,
-	}
-}
-
-// ContextMiddleware 中间件用于将标准 echo.Context 转换为 CustomContext
-func ContextMiddleware() echo.MiddlewareFunc {
-	return func(next echo.HandlerFunc) echo.HandlerFunc {
-		return func(c echo.Context) error {
-			cc := NewCustomContext(c)
-			return next(cc)
-		}
-	}
-}

backend/middleware/logger.go

@@ -1,8 +1,8 @@
 package middleware
 
 import (
-	"github.com/labstack/echo/v4"
-	"github.com/labstack/echo/v4/middleware"
+	"github.com/labstack/echo/v5"
+	"github.com/labstack/echo/v5/middleware"
 	"go.uber.org/zap"
 )
 
@@ -10,7 +10,7 @@ func LoggerMiddleware() echo.MiddlewareFunc {
 	return middleware.RequestLoggerWithConfig(middleware.RequestLoggerConfig{
 		LogURI:    true,
 		LogStatus: true,
-		LogValuesFunc: func(c echo.Context, v middleware.RequestLoggerValues) error {
+		LogValuesFunc: func(c *echo.Context, v middleware.RequestLoggerValues) error {
 			zap.L().Info("request",
 				zap.String("url", v.URI),
 				zap.Int("status", v.Status),

backend/middleware/rate_limit.go

@@ -5,9 +5,8 @@ import (
 	"slices"
 	"time"
 
-	"github.com/labstack/echo/v4"
-	echo_middleware "github.com/labstack/echo/v4/middleware"
-	"golang.org/x/time/rate"
+	"github.com/labstack/echo/v5"
+	echo_middleware "github.com/labstack/echo/v5/middleware"
 )
 
 type RateSkiper struct {
@@ -23,22 +22,22 @@ var RateSkipList = []RateSkiper{
 
 func RateLimiterMiddleware() echo.MiddlewareFunc {
 	config := echo_middleware.RateLimiterConfig{
-		Skipper: func(e echo.Context) bool {
+		Skipper: func(e *echo.Context) bool {
 			path := e.Path()
 			r := e.Request()
 			return slices.Contains(RateSkipList, RateSkiper{Path: path, Method: r.Method})
 		},
 		Store: echo_middleware.NewRateLimiterMemoryStoreWithConfig(
-			echo_middleware.RateLimiterMemoryStoreConfig{Rate: rate.Limit(10), Burst: 30, ExpiresIn: 3 * time.Minute},
+			echo_middleware.RateLimiterMemoryStoreConfig{Rate: 10, Burst: 30, ExpiresIn: 3 * time.Minute},
 		),
-		IdentifierExtractor: func(ctx echo.Context) (string, error) {
+		IdentifierExtractor: func(ctx *echo.Context) (string, error) {
 			id := ctx.RealIP()
 			return id, nil
 		},
-		ErrorHandler: func(context echo.Context, err error) error {
+		ErrorHandler: func(context *echo.Context, err error) error {
 			return context.JSON(http.StatusForbidden, nil)
 		},
-		DenyHandler: func(context echo.Context, identifier string, err error) error {
+		DenyHandler: func(context *echo.Context, identifier string, err error) error {
 			return context.JSON(http.StatusTooManyRequests, nil)
 		},
 	}

backend/middleware/session.go

@@ -2,10 +2,15 @@ package middleware
 
 import (
 	"github.com/gorilla/sessions"
-	"github.com/labstack/echo-contrib/session"
-	"github.com/labstack/echo/v4"
+	"github.com/labstack/echo/v5"
 )
 
 func SessionMiddleware() echo.MiddlewareFunc {
-	return session.Middleware(sessions.NewCookieStore([]byte("secret")))
+	store := sessions.NewCookieStore([]byte("secret")) // TODO: 从配置中获取密钥
+	return func(next echo.HandlerFunc) echo.HandlerFunc {
+		return func(c *echo.Context) error {
+			c.Set("_session_store", store)
+			return next(c)
+		}
+	}
 }

backend/route.go

@@ -0,0 +1,33 @@
+package main
+
+import (
+	"backend/internal/controllers"
+
+	"github.com/labstack/echo/v5"
+)
+
+type Route struct {
+	Method  []string
+	Path    string
+	Handler func(c *echo.Context) error
+}
+
+var routes = []Route{
+	{Method: []string{"POST"}, Path: "/file/create", Handler: controllers.CreateUploadTask},
+	{Method: []string{"POST"}, Path: "/file/slice", Handler: controllers.UploadFileSlice},
+	{Method: []string{"POST"}, Path: "/file/finish", Handler: controllers.FinishUploadTask},
+
+	{Method: []string{"GET"}, Path: "/share/:id", Handler: controllers.GetShareInfo},
+	{Method: []string{"POST"}, Path: "/share", Handler: controllers.CreateShareInfo},
+
+	{Method: []string{"GET"}, Path: "/download", Handler: controllers.DownloadShare},
+	{Method: []string{"POST"}, Path: "/download", Handler: controllers.VaildateShare},
+	{Method: []string{"GET"}, Path: "/share/pickup/:code", Handler: controllers.GetShareByPickupCode},
+
+	{Method: []string{"GET"}, Path: "/stat", Handler: controllers.GetStat},
+	{Method: []string{"GET"}, Path: "/config", Handler: controllers.GetConfig},
+	{Method: []string{"GET"}, Path: "/about", Handler: controllers.GetAbout},
+
+	{Method: []string{"POST"}, Path: "/task/:type", Handler: controllers.CreateTask},
+	{Method: []string{"GET"}, Path: "/task/:id", Handler: controllers.GetTask},
+}

backend/test/utils/http_result_test.go

@@ -6,7 +6,9 @@ import (
 	"net/http/httptest"
 	"testing"
 
-	"github.com/labstack/echo/v4"
+	"backend/internal/utils"
+
+	"github.com/labstack/echo/v5"
 	"github.com/stretchr/testify/assert"
 )
 
@@ -17,7 +19,7 @@ func TestHTTPSuccessHandler(t *testing.T) {
 	c := e.NewContext(req, rec)
 
 	data := map[string]interface{}{"result": "success"}
-	err := HTTPSuccessHandler(c, data)
+	err := utils.HTTPSuccessHandler(c, data)
 	assert.NoError(t, err)
 
 	assert.Equal(t, http.StatusOK, rec.Code)
@@ -40,7 +42,7 @@ func TestHTTPErrorHandler(t *testing.T) {
 	rec := httptest.NewRecorder()
 	c := e.NewContext(req, rec)
 
-	err := HTTPErrorHandler(c, assert.AnError)
+	err := utils.HTTPErrorHandler(c, assert.AnError)
 	assert.NoError(t, err)
 
 	assert.Equal(t, http.StatusBadRequest, rec.Code)

backend/test/utils/password_test.go

@@ -1,30 +1,31 @@
 package utils
 
 import (
-	"os"
+	"bytes"
+	"fmt"
 	"testing"
 
+	"backend/internal/utils"
+	u "pkg/utils"
+
 	"github.com/stretchr/testify/assert"
 )
 
 func TestGeneratePasswordHash(t *testing.T) {
-	// 保存原始环境变量
-	originalSalt := os.Getenv("PASSWORD_SALT")
-	defer os.Setenv("PASSWORD_SALT", originalSalt)
 
 	tests := []struct {
 		name        string
 		password    string
 		salt        string
 		expectError bool
-		errorMsg    string
+		err         error
 	}{
 		{
-			name:        "PASSWORD_SALT未配置",
+			name:        "share.password_salt未配置",
 			password:    "testpassword",
 			salt:        "",
 			expectError: true,
-			errorMsg:    "请配置PASSWORD_SALT",
+			err:         utils.ErrPasswordSaltNotSet,
 		},
 		{
 			name:        "正常生成哈希",
@@ -37,21 +38,23 @@ func TestGeneratePasswordHash(t *testing.T) {
 	for _, tt := range tests {
 		t.Run(tt.name, func(t *testing.T) {
 			// 设置环境变量
-			if tt.salt != "" {
-				os.Setenv("PASSWORD_SALT", tt.salt)
-			} else {
-				os.Unsetenv("PASSWORD_SALT")
-			}
+			u.InitTestViper(u.EnvOption{
+				ConfigData: bytes.NewBuffer([]byte(fmt.Sprintf(`
+				share:
+					password_salt: %s
+				`, tt.salt))),
+			})
+			u.SetEnv("share.password_salt", tt.salt)
 
-			hash, err := GeneratePasswordHash(tt.password)
+			hash, err := utils.GeneratePasswordHash(tt.password)
 
 			if tt.expectError {
 				if err == nil {
 					t.Errorf("期望错误，但得到了 nil")
 					return
 				}
-				if err.Error() != tt.errorMsg {
-					t.Errorf("期望错误信息 '%s'，但得到了 '%s'", tt.errorMsg, err.Error())
+				if err != tt.err {
+					t.Errorf("期望错误信息 '%s'，但得到了 '%s'", tt.err.Error(), err.Error())
 				}
 				return
 			}

config.example.yaml

@@ -0,0 +1,66 @@
+share:
+    # (必填)你的下载secret，每一次下载次数减1的时候都会根据这里的secret生成一个下载jwt token， 有效期一小时，使用该下载token有效期内可以多线程下载该文件而不会被多次扣除次数
+    download_secret: your-secret-token
+    # 颁发的下载token的窗口期，默认12小时，文件过期后自动从服务器删除时间为此时间基础上加1小时，默认为12+1=13小时
+    download_window: 12
+    # (必填)设置密码时会把密码加盐
+    password_salt: your-passwall-salt
+
+upload:
+    # 上传文件保存路径
+    path: /upload
+    # 指定实例最大上传容量，支持填写人类可读的值，比如1TiB，500GiB等，注意填写GiB而不是GB, Gib按1024字节计算，Gb按1000字节计算
+    maximum: 100GiB
+
+redis:
+    # (必填)redis 地址
+    url: redis://redis:6379/0
+
+# 实例功能配置
+features:
+    file-share:
+        enabled: true
+    text-share:
+        enabled: true
+    file-image-compress:
+        enabled: true
+    file-image-convert:
+        enabled: true
+
+# 站点基本信息
+site:
+    # 必填，对应你的公网域名
+    url: http://localhost:5000
+    title:
+        'en': '015'
+    desc:
+        'en': '015 is an open-source temporary file sharing platform project that supports uploading, downloading, and sharing files and text.'
+    icon: '/logo.png'
+    bg_url: 'https://img.fudaoyuan.icu/api/1/random/?scale_min=1.5&webp=true&md=false&format=302'
+
+# 关于页面的
+about:
+    # hero图片 推荐3:1 比例
+    bg_url: 'https://files.mastodon.social/site_uploads/files/000/000/001/@1x/57c12f441d083cde.png'
+    # 关于信息，markdown格式
+    content:
+        'zh': |
+            ### markdown测试文案
+
+            这里有一个图片示例：
+
+            ![示例图片](https://cdn.ani.work/site_uploads/files/000/000/005/@1x/d68677a8b7a8d296.png)
+
+            这里有一个[示例链接](https://fudaoyuan.icu)
+        'en': |
+            ### Markdown Test Content
+
+            Here is an image example:
+
+            ![Sample Image](https://cdn.ani.work/site_uploads/files/000/000/005/@1x/d68677a8b7a8d296.png)
+
+            Here is a [sample link](https://fudaoyuan.icu)
+    email: keven@fudaoyuan.icu
+    name: keven
+    url: 'https://fudaoyuan.icu'
+    avatar: ''

docker-compose.yml

@@ -1,24 +1,24 @@
 services:
-  app:
-    image: fudaoyuanicu/015-app:latest
-    container_name: 015-app
-    volumes:
-      - ./uploads:/uploads
-    ports:
-      - "8080:80"
-    env_file: '.env'
-    depends_on:
-      - redis
+    app:
+        image: fudaoyuanicu/015-app:latest
+        container_name: 015-app
+        volumes:
+            - ./uploads:/uploads
+            - ./config.yaml:/app/config.yaml
+        ports:
+            - '8080:80'
+        depends_on:
+            - redis
 
-  worker:
-    image: fudaoyuanicu/015-worker:latest
-    container_name: worker
-    env_file: '.env'
-    volumes:
-      - ./uploads:/uploads
-    depends_on:
-      - app
-      - redis
-  redis:
-    image: redis:7
-    container_name: redis
+    worker:
+        image: fudaoyuanicu/015-worker:latest
+        container_name: worker
+        volumes:
+            - ./uploads:/uploads
+            - ./config.yaml:/config.yaml
+        depends_on:
+            - app
+            - redis
+    redis:
+        image: redis:7
+        container_name: redis

front/assets/css/main.css

@@ -41,6 +41,24 @@
   --color-sidebar-accent-foreground: var(--sidebar-accent-foreground);
   --color-sidebar-border: var(--sidebar-border);
   --color-sidebar-ring: var(--sidebar-ring);
+  --animate-accordion-down: accordion-down 0.2s ease-out;
+  --animate-accordion-up: accordion-up 0.2s ease-out;
+  @keyframes accordion-down {
+  from {
+    height: 0;
+    }
+  to {
+    height: var(--reka-accordion-content-height);
+    }
+  }
+  @keyframes accordion-up {
+  from {
+    height: var(--reka-accordion-content-height);
+    }
+  to {
+    height: 0;
+    }
+  }
 }
 
 :root {

front/components/About/AboutBaseInfo.vue

@@ -0,0 +1,155 @@
+<script setup lang="ts">
+import { useQuery } from '@tanstack/vue-query'
+import { Skeleton } from '@/components/ui/skeleton'
+import getFileSize from '~/lib/getFileSize'
+import useMyAppConfig from '@/composables/useMyAppConfig'
+import { useFeatureMeta } from '@/composables/useFeatureMeta'
+import Progress from '~/components/ui/progress/Progress.vue'
+import renderI18n from '~/lib/renderI18n'
+import { I18nT } from 'vue-i18n'
+import { calcNativeHash } from '~/lib/calcFileHash'
+
+const { locale } = useI18n()
+const appConfig = useMyAppConfig()
+const featureMeta = useFeatureMeta()
+const { data, isLoading } = useQuery({
+    queryKey: ['about'],
+    queryFn: async () => {
+        const data = await $fetch<{
+            data: {
+                file: {
+                    maximun: number
+                    current: number
+                }
+                bg_url?: string
+                avatar?: string
+                name?: string
+                email?: string
+                url?: string
+                content?: Record<string, string>
+            }
+        }>('/api/about')
+        return data?.data
+    },
+})
+const { t } = useI18n()
+
+const { state: userAvatar } = useAsyncState(async () => {
+    if (!data?.value?.email) return null
+    const buffer = new TextEncoder().encode(data?.value?.email)
+    const hash = await calcNativeHash(buffer)
+    return `https://www.gravatar.com/avatar/${hash}?d=retro`
+}, null)
+</script>
+
+<template>
+    <template v-if="isLoading">
+        <div class="flex flex-col gap-2">
+            <Skeleton class="aspect-[3/1] w-full rounded-xl" />
+            <div class="flex flex-col gap-2 items-center">
+                <Skeleton class="h-6 w-32 rounded" />
+                <Skeleton class="h-4 w-52 rounded" />
+            </div>
+        </div>
+    </template>
+    <template v-else>
+        <NuxtImg v-if="data?.bg_url" :src="data?.bg_url" class="aspect-[3/1] w-full rounded-xl object-cover" />
+        <div class="flex flex-col gap-2 items-center">
+            <div class="text-xl">{{ renderI18n(appConfig?.site_title ?? {}, 'en', locale) }}</div>
+            <div class="text-sm opacity-75 text-center px-5">
+                <I18nT keypath="page.about.powerBy" tag="span">
+                    <NuxtLink href="https://github.com/keven1024/015" target="_blank" class="text-primary hover:underline">015</NuxtLink>
+                </I18nT>
+            </div>
+        </div>
+    </template>
+
+    <div class="font-semibold">{{ t('page.about.systemInfo') }}</div>
+    <template v-if="isLoading">
+        <div class="flex flex-row gap-2">
+            <Skeleton class="w-full h-20 rounded-xl" v-for="i in 2" :key="i" />
+        </div>
+    </template>
+    <template v-else>
+        <div class="grid grid-cols-1 md:grid-cols-2 gap-2">
+            <div class="rounded-xl bg-white/50 flex-1 flex flex-col p-3 gap-2">
+                <div class="opacity-75 text-xs">{{ t('page.about.admin') }}</div>
+                <div
+                    class="flex flex-row gap-2 items-center cursor-pointer"
+                    @click="
+                        () => {
+                            if (data?.url) {
+                                navigateTo(data?.url, { external: true })
+                                return
+                            }
+                            if (data?.email) {
+                                navigateTo(`mailto:${data?.email ?? ''}`, { external: true })
+                                return
+                            }
+                            return
+                        }
+                    "
+                >
+                    <Avatar class="size-10">
+                        <AvatarImage v-if="!!data?.avatar || !!data?.email" :src="data?.avatar || (userAvatar as string)" />
+                        <AvatarFallback class="bg-black/10 font-bold">
+                            {{ data?.name?.charAt(0)?.toUpperCase() }}
+                        </AvatarFallback>
+                    </Avatar>
+                    <div class="flex flex-col">
+                        <div class="text-md font-semibold">{{ data?.name }}</div>
+                        <div class="text-xs opacity-75">{{ data?.email }}</div>
+                    </div>
+                </div>
+            </div>
+            <div class="rounded-xl bg-white/50 flex-1 flex flex-col p-3 gap-2">
+                <div class="opacity-75 text-xs">{{ t('page.about.storage') }}</div>
+                <div class="text-right flex flex-row items-baseline">
+                    <span class="text-lg font-semibold">{{ getFileSize(data?.file?.current ?? 0) }}</span>
+                    <span class="text-md opacity-75">/ {{ getFileSize(data?.file?.maximun ?? 0) }}</span>
+                </div>
+                <Progress class="h-1" :model-value="((data?.file?.current ?? 0) / (data?.file?.maximun ?? 0)) * 100" />
+            </div>
+        </div>
+    </template>
+    <template v-if="isLoading">
+        <Skeleton class="w-full h-24 rounded-xl" />
+    </template>
+    <template v-else>
+        <div class="rounded-xl bg-white/50 flex flex-col p-3 gap-3">
+            <div class="font-semibold">{{ t('page.about.enabledFeatures') }}</div>
+            <div v-if="featureMeta.length" class="flex flex-row flex-wrap gap-2">
+                <div
+                    v-for="feature in featureMeta"
+                    :key="feature.key"
+                    class="flex flex-row items-center gap-2 rounded-full bg-black/5 px-2 py-1 text-sm font-medium"
+                >
+                    <div class="flex size-6 items-center justify-center rounded-full text-black/80" :style="feature.style">
+                        <component :is="feature.icon" class="size-3.5" />
+                    </div>
+                    <span>{{ feature.label }}</span>
+                </div>
+            </div>
+            <div v-else class="text-sm opacity-75">
+                {{ t('page.about.enabledFeaturesEmpty') }}
+            </div>
+        </div>
+    </template>
+    <template v-if="isLoading">
+        <Skeleton class="w-full h-16 rounded-xl" />
+    </template>
+    <template v-else>
+        <div v-if="data?.content" class="rounded-xl bg-white/50 flex flex-col px-3 gap-2">
+            <Accordion type="single" collapsible>
+                <AccordionItem value="about">
+                    <AccordionTrigger>
+                        <span class="font-semibold">{{ t('page.about.about') }}</span>
+                    </AccordionTrigger>
+                    <AccordionContent>
+                        <MarkdownRender class="max-w-full" :markdown="renderI18n(data?.content ?? {}, 'en', locale) ?? ''" />
+                    </AccordionContent>
+                </AccordionItem>
+            </Accordion>
+        </div>
+    </template>
+</template>

front/components/About/AboutChartView.vue

@@ -0,0 +1,232 @@
+<script setup lang="ts">
+import { cx } from 'class-variance-authority'
+import { useQuery } from '@tanstack/vue-query'
+import { Skeleton } from '@/components/ui/skeleton'
+import dayjs from 'dayjs'
+import { filesize } from 'filesize'
+import { times } from 'lodash-es'
+import type { ChartConfig } from '@/components/ui/chart'
+import { VisArea, VisAxis, VisLine, VisXYContainer } from '@unovis/vue'
+import { ChartContainer, ChartTooltip, ChartCrosshair, ChartLegendContent, componentToString, ChartTooltipContent } from '@/components/ui/chart'
+
+interface StatChartData {
+    file_size: number
+    file_num: number
+    share_num: number
+    download_num: number
+    date: Date
+}
+
+interface QueueChartData {
+    processed: number
+    failed: number
+    date: Date
+}
+
+type ChartDataItem = StatChartData | QueueChartData
+
+type AreaChartConfig = {
+    data: ChartDataItem[]
+    index: string
+    config: ChartConfig
+}
+
+const { data, isLoading } = useQuery({
+    queryKey: ['stat'],
+    queryFn: async () => {
+        const response = await $fetch<{
+            data: {
+                chart: {
+                    storage: Record<string, StatChartData>
+                    queue: Record<string, QueueChartData>
+                }
+            }
+        }>('/api/stat')
+        return response.data
+    },
+})
+
+const { t } = useI18n()
+
+const chartTabs = computed(() => {
+    return [
+        {
+            label: t('page.about.file'),
+            value: 'storage',
+            total: data.value?.chart?.storage
+                ? Object.values(data.value.chart.storage).reduce((acc: number, curr: StatChartData) => acc + curr.file_num, 0)
+                : 0,
+        },
+        {
+            label: t('page.about.share'),
+            value: 'share',
+            total: data.value?.chart?.storage
+                ? Object.values(data.value.chart.storage).reduce((acc: number, curr: StatChartData) => acc + curr.share_num, 0)
+                : 0,
+        },
+        {
+            label: t('page.about.download'),
+            value: 'download',
+            total: data.value?.chart?.storage
+                ? Object.values(data.value.chart.storage).reduce((acc: number, curr: StatChartData) => acc + curr.download_num, 0)
+                : 0,
+        },
+        {
+            label: t('page.about.task'),
+            value: 'queue',
+            total: data.value?.chart?.queue
+                ? Object.values(data.value.chart.queue).reduce((acc: number, curr: QueueChartData) => acc + curr.processed + curr.failed, 0)
+                : 0,
+        },
+    ]
+})
+
+const currentChartTab = ref<'storage' | 'queue' | 'share' | 'download'>('storage')
+const currentChartData = computed((): AreaChartConfig => {
+    const { storage, queue } = data.value?.chart || {}
+    if (currentChartTab.value === 'queue') {
+        const queueData = times(30, (i) => {
+            return {
+                date: dayjs().subtract(i, 'day').toDate(),
+                processed: queue?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.processed || 0,
+                failed: queue?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.failed || 0,
+            }
+        })
+        return {
+            data: queueData,
+            index: 'date' as const,
+            config: {
+                processed: { color: '#4ade80', label: t('page.about.processed') },
+                failed: { color: '#f87171', label: t('page.about.failed') },
+            },
+        }
+    }
+    const storageData = times(30, (i) => {
+        const base = { date: dayjs().subtract(i, 'day').toDate() }
+        if (currentChartTab.value === 'share') {
+            return {
+                ...base,
+                share_num: storage?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.share_num || 0,
+            }
+        }
+        if (currentChartTab.value === 'download') {
+            return {
+                ...base,
+                download_num: storage?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.download_num || 0,
+            }
+        }
+        return {
+            ...base,
+            file_size: storage?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.file_size || 0,
+            file_num: storage?.[dayjs().subtract(i, 'day').format('YYYY-MM-DD')]?.file_num || 0,
+        }
+    })
+
+    if (currentChartTab.value === 'share') {
+        return {
+            data: storageData as ChartDataItem[],
+            index: 'date' as const,
+            config: {
+                share_num: { color: '#ea580c', label: t('page.about.share') },
+            },
+        }
+    }
+    if (currentChartTab.value === 'download') {
+        return {
+            data: storageData as ChartDataItem[],
+            index: 'date' as const,
+            config: {
+                download_num: { color: '#a3e635', label: t('page.about.download') },
+            },
+        }
+    }
+    return {
+        data: storageData as ChartDataItem[],
+        index: 'date' as const,
+        config: {
+            file_size: { color: '#38bdf8', label: t('page.about.fileSize') },
+            file_num: { color: '#a78bfa', label: t('page.about.fileNum') },
+        },
+    }
+})
+</script>
+
+<template>
+    <div class="font-semibold">{{ t('page.about.analysis') }}</div>
+    <template v-if="isLoading">
+        <div class="flex flex-row gap-2">
+            <Skeleton class="w-full h-96 rounded-xl" />
+        </div>
+    </template>
+    <template v-else>
+        <div class="flex flex-col gap-2 bg-white/50 w-full rounded-xl py-5">
+            <div class="grid grid-cols-2 md:grid-cols-4 gap-2 px-5">
+                <div
+                    :class="cx('rounded-md min-w-30 flex flex-col px-3 py-1.5 cursor-pointer', currentChartTab === tab.value && 'bg-black/10')"
+                    v-for="tab in chartTabs"
+                    :key="tab.value"
+                    @click="
+                        () => {
+                            currentChartTab = tab.value as 'storage' | 'queue'
+                        }
+                    "
+                >
+                    <div class="opacity-75 text-xs">{{ tab.label }}</div>
+                    <div class="text-lg font-semibold">{{ tab.total }}</div>
+                </div>
+            </div>
+            <ChartContainer :config="currentChartData.config" class="h-64 w-full p-5" :cursor="false">
+                <VisXYContainer :data="currentChartData.data" :x-domain="[dayjs().toDate(), dayjs().subtract(29, 'day').toDate()]">
+                    <VisArea
+                        :key="currentChartTab"
+                        :x="(d: ChartDataItem) => d.date"
+                        :y="Object.keys(currentChartData.config).map((key) => (d: ChartDataItem) => d?.[key as keyof ChartDataItem])"
+                        :color="Object.values(currentChartData.config).map((c) => c.color)"
+                        :opacity="0.6"
+                    />
+                    <VisLine
+                        :key="currentChartTab"
+                        :x="(d: ChartDataItem) => d.date"
+                        :y="Object.keys(currentChartData.config).map((key) => (d: ChartDataItem) => d?.[key as keyof ChartDataItem])"
+                        :color="Object.values(currentChartData.config).map((c) => c.color)"
+                        :line-width="1"
+                    />
+                    <VisAxis
+                        :key="currentChartTab"
+                        type="x"
+                        :tick-line="false"
+                        :domain-line="false"
+                        :grid-line="false"
+                        :num-ticks="6"
+                        :tick-format="
+                            (d: Date) => {
+                                return dayjs(d).format('MMM')
+                            }
+                        "
+                        :tick-values="currentChartData.data.map((d) => d.date)"
+                    />
+                    <ChartTooltip />
+                    <ChartCrosshair
+                        :key="currentChartTab"
+                        :template="
+                            componentToString(currentChartData.config, ChartTooltipContent, {
+                                class: 'w-[14rem]',
+                                labelFormatter: (d) => {
+                                    return dayjs(d).format('MM-DD')
+                                },
+                                valueFormatter: (value, key) => {
+                                    if (key === 'file_size' && typeof value === 'number') {
+                                        return filesize(value)
+                                    }
+                                    return String(value)
+                                },
+                            })
+                        "
+                        :color="(d: any, i: number) => Object.values(currentChartData.config).map((c) => c.color as string)[i]"
+                    />
+                </VisXYContainer>
+                <ChartLegendContent />
+            </ChartContainer>
+        </div>
+    </template>
+</template>

front/components/About/AboutVersionView.vue

@@ -0,0 +1,20 @@
+<script setup lang="ts">
+import useMyAppConfig from '@/composables/useMyAppConfig'
+import dayjs from 'dayjs'
+
+const appConfig = useMyAppConfig()
+</script>
+
+<template>
+    <div class="flex flex-row flex-wrap gap-4 items-center text-sm opacity-60">
+        <div class="flex flex-row gap-1 opacity-100">
+            <NuxtLink href="https://github.com/keven1024/015" target="_blank" class="text-primary hover:underline">015</NuxtLink>
+            {{ appConfig?.version ?? 'dev' }}
+        </div>
+
+        <div v-if="appConfig?.build_time">
+            {{ `Build at ${dayjs(appConfig?.build_time * 1000).format('YYYY-MM-DD')}` }}
+        </div>
+        <div>Designed by <NuxtLink href="https://fudaoyuan.icu" target="_blank" class="text-primary hover:underline">keven1024</NuxtLink></div>
+    </div>
+</template>

front/components/AboutChartTooltip.vue

@@ -1,43 +0,0 @@
-<script setup lang="ts">
-import getFileSize from '~/lib/getFileSize'
-
-const props = defineProps<{
-    data: { name: string; value: string; color: string }[]
-    title: string
-}>()
-const dataKeyMap = {
-    file_size: {
-        'zh-CN': '文件大小',
-        en: 'File Size',
-    },
-    file_num: {
-        'zh-CN': '文件数量',
-        en: 'File Num',
-    },
-    processed: {
-        'zh-CN': '处理数量',
-        en: 'Processed',
-    },
-    failed: {
-        'zh-CN': '失败数量',
-        en: 'Failed',
-    },
-}
-</script>
-
-<template>
-    <div class="rounded-md bg-white p-2 flex flex-col gap-2">
-        <div class="text-sm font-medium">{{ title }}</div>
-        <div v-for="(item, index) in data" :key="index">
-            <div class="flex flex-row items-center gap-2">
-                <div class="h-5 w-2 rounded-full" :style="{ backgroundColor: item.color ?? '#222' }"></div>
-                <div class="text-xs font-medium">
-                    {{ dataKeyMap?.[item.name as keyof typeof dataKeyMap]?.['en'] ?? item.name }}
-                </div>
-                <div class="text-sm">
-                    {{ ['file_size']?.includes(item?.name) ? getFileSize(item.value) : item.value }}
-                </div>
-            </div>
-        </div>
-    </div>
-</template>

front/components/BaseCard.vue

@@ -0,0 +1,29 @@
+<script setup lang="ts">
+const props = defineProps<{
+    title?: string
+    showBackButton?: boolean
+}>()
+const router = useRouter()
+</script>
+
+<template>
+    <div class="rounded-xl p-5 bg-white/50 backdrop-blur-xl w-full lg:w-200">
+        <div v-if="title" class="flex flex-row justify-between">
+            <h1 class="text-xl font-normal">{{ title }}</h1>
+            <Button
+                v-if="!!showBackButton"
+                variant="outline"
+                class="bg-white/70"
+                size="icon"
+                @click="
+                    () => {
+                        router.push('/')
+                    }
+                "
+            >
+                <LucideHome class="size-4" />
+            </Button>
+        </div>
+        <slot />
+    </div>
+</template>

front/components/CircularProgress.vue

@@ -1,19 +1,21 @@
 <script lang="ts" setup>
 import { VisSingleContainer, VisDonut } from '@unovis/vue'
-import { withDefaults, defineProps } from 'vue'
 
-const props = withDefaults(defineProps<{
-    value?: number
-    size?: number
-    color?: string
-}>(), {
-    value: 0,
-    size: 40,
-    color: '#06b6d4'
-})
+const props = withDefaults(
+    defineProps<{
+        value?: number
+        size?: number
+        color?: string
+    }>(),
+    {
+        value: 0,
+        size: 40,
+        color: '#06b6d4',
+    }
+)
 const data = computed(() => {
     const progress = Math.min(Math.max(props.value, 0), 100)
-    return [progress, 100 - progress ]
+    return [progress, 100 - progress]
 })
 const getValue = (d: number) => d
 const getColor = (d: number, i: number) => [props?.color, 'transparent'][i]

front/components/CopyButton.vue

@@ -0,0 +1,32 @@
+<script setup lang="ts">
+import { Button } from '@/components/ui/button'
+import asyncWait from '~/lib/asyncWait'
+import { toast } from 'vue-sonner'
+import { LucideCheck, LucideCopy } from 'lucide-vue-next'
+
+const isCopy = ref(false)
+const props = defineProps<{
+    value: string
+}>()
+const { copy } = useClipboard()
+const { t } = useI18n()
+</script>
+
+<template>
+    <Button
+        variant="outline"
+        class="transition-all duration-300"
+        size="icon"
+        @click="
+            async () => {
+                await copy(props?.value)
+                isCopy = true
+                toast.success(t('common.copySuccess'))
+                await asyncWait(3000)
+                isCopy = false
+            }
+        "
+    >
+        <component :is="isCopy ? LucideCheck : LucideCopy" class="size-1/2" />
+    </Button>
+</template>

front/components/Drawer/FileShareDrawer.vue

@@ -1,22 +1,10 @@
 <script setup lang="ts">
-import {
-    LucideShare,
-    LucideImage,
-    LucideBot,
-    LucideLanguages,
-    LucideFileText,
-    LucideImageMinus,
-    LucideArrowRightLeft,
-    LucideImagePlus,
-    LucideAudioLines,
-    LucideListMusic,
-} from 'lucide-vue-next'
-import { cx } from 'class-variance-authority'
-import { isObject } from 'lodash-es'
 import showDrawer from '@/lib/showDrawer'
 import FileShareHandle from '@/components/Preprocessing/FileShareHandle.vue'
+import ImageConvertHandle from '@/components/Preprocessing/ImageConvertHandle.vue'
+import { useFeatureMeta, type FeatureKey } from '@/composables/useFeatureMeta'
 import type { FileShareHandleProps } from '../Preprocessing/types'
-const { t } = useI18n()
+
 const props = defineProps<{
     hide: () => void
     file: File[]
@@ -24,33 +12,25 @@ const props = defineProps<{
 }>()
 
 const isImage = computed(() => props.file.every((r) => r?.type?.startsWith('image/')))
-const isVideo = computed(() => props.file.every((r) => r?.type?.startsWith('video/')))
-const isAudio = computed(() => props.file.every((r) => r?.type?.startsWith('audio/')))
-const isMedia = computed(() => isImage.value || isVideo.value || isAudio.value)
 
-const isPDF = computed(() => props.file.every((r) => r?.type?.startsWith('application/pdf')))
-const isDOC = computed(() => props.file.every((r) => r?.type?.startsWith('application/msword')))
-const isXLS = computed(() => props.file.every((r) => r?.type?.startsWith('application/vnd.ms-excel')))
-const isPPT = computed(() => props.file.every((r) => r?.type?.startsWith('application/vnd.ms-powerpoint')))
-const isDocument = computed(() => isPDF.value || isDOC.value || isXLS.value || isPPT.value)
-const actions = [
-    {
-        label: t('file.handleType.file-share'),
-        icon: LucideShare,
-        className: 'bg-green-300',
-        onClick: () => {
-            showDrawer({
-                render: ({ hide }) => h(FileShareHandle, { ...props, hide }),
-            })
-        },
+const featureMeta = useFeatureMeta()
+
+type ActionHandler = {
+    condition?: () => boolean
+    onClick: () => void
+}
+
+const actionHandlers: Partial<Record<FeatureKey, ActionHandler>> = {
+    'file-share': {
+        onClick: () => showDrawer({ render: ({ hide }) => h(FileShareHandle, { ...props, hide }) }),
     },
-    isImage.value && {
-        label: t('file.handleType.file-image-compress'),
-        icon: LucideImageMinus,
-        className: 'bg-red-300',
-        onClick: () => {
-            props.onFileHandle({ type: 'file-image-compress', config: {} })
-        },
+    'file-image-compress': {
+        condition: () => isImage.value,
+        onClick: () => props.onFileHandle({ type: 'file-image-compress', config: {} }),
+    },
+    'file-image-convert': {
+        condition: () => isImage.value,
+        onClick: () => showDrawer({ render: ({ hide }) => h(ImageConvertHandle, { ...props, hide }) }),
     },
     // isImage.value && {
     //     label: '图片翻译', icon: LucideLanguages, className: 'bg-orange-300', onClick: () => {
@@ -77,19 +57,24 @@ const actions = [
     //         console.log('复制链接')
     //     }
     // },
-]?.filter(isObject) as {
-    label: string
-    icon: any
-    className: string
-    onClick: () => void
-}[]
+}
+
+const actions = computed(() =>
+    featureMeta.value
+        .filter((meta) => {
+            const { key } = meta || {}
+            const handler = actionHandlers?.[key]
+            return handler && (!handler.condition || handler.condition())
+        })
+        .map((meta) => ({ ...meta, onClick: actionHandlers[meta.key]!.onClick }))
+)
 </script>
 <template>
-    <div class="flex flex-col gap-5 p-5">
+    <div class="flex flex-col gap-5 p-5 overflow-x-auto">
         <div class="flex flex-row gap-2">
             <div
                 v-for="item in actions"
-                :key="item.label"
+                :key="item.key"
                 class="flex flex-col items-center gap-2 max-w-20"
                 @click="
                     () => {
@@ -98,7 +83,7 @@ const actions = [
                     }
                 "
             >
-                <div :class="cx('size-14 flex justify-center items-center rounded-full mx-3', item?.className)">
+                <div class="size-14 flex justify-center items-center rounded-full mx-3" :style="item?.style">
                     <component :is="item?.icon" />
                 </div>
                 <div class="text-xs truncate w-full text-center">{{ item?.label }}</div>

front/components/Drawer/I18nSwitchDrawer.vue

@@ -1,41 +1,29 @@
 <script setup lang="ts">
-import { cx } from "class-variance-authority";
+import { cx } from 'class-variance-authority'
+import type { Locale } from '@intlify/core-base'
 
-const { availableLocales, setLocale, locale: currentLocale, t } = useI18n();
-const route = useRoute();
+const props = defineProps<{
+    hide: () => void
+}>()
 
-const localeMap = {
-  "zh-CN": "简体中文",
-  en: "English",
-  // 'ja': '日本語',
-  // 'ko': '한국어',
-  // 'fr': 'Français',
-  // 'de': 'Deutsch',
-};
+const { locales, setLocale, locale: currentLocale, t } = useI18n()
 
-const switchLocale = async (locale: string) => {
-  await setLocale(locale as keyof typeof localeMap);
-  navigateTo(route.path, {
-    external: true,
-  });
-};
+const switchLocale = async (locale: Locale) => {
+    await setLocale(locale)
+    props.hide()
+}
 </script>
 
 <template>
-  <div class="flex flex-col gap-1 py-2">
-    <div class="text-xl font-bold mb-3">{{ t("i18n.switchLocale") }}</div>
-    <div
-      v-for="locale in availableLocales"
-      :key="locale"
-      :class="
-        cx(
-          'rounded-md hover:bg-black/10 p-2 cursor-pointer',
-          currentLocale === locale && 'bg-black/10 font-bold',
-        )
-      "
-      @click="() => switchLocale(locale)"
-    >
-      {{ localeMap?.[locale as keyof typeof localeMap] }}
+    <div class="flex flex-col gap-1 py-2">
+        <div class="text-xl font-bold mb-3">{{ t('i18n.switchLocale') }}</div>
+        <div
+            v-for="locale in locales"
+            :key="locale.code"
+            :class="cx('rounded-md hover:bg-black/10 p-2 cursor-pointer', currentLocale === locale.code && 'bg-black/10 font-bold')"
+            @click="() => switchLocale(locale.code)"
+        >
+            {{ locale.name }}
+        </div>
     </div>
-  </div>
 </template>

front/components/Drawer/PasswallShareDrawer.vue

@@ -4,6 +4,7 @@ import FormButton from '@/components/Field/FormButton.vue'
 import InputField from '@/components/Field/InputField.vue'
 import type { FormContext, GenericObject } from 'vee-validate'
 import { toast } from 'vue-sonner'
+const { t } = useI18n()
 const props = defineProps<{
     share_id: string
     hide: any
@@ -15,14 +16,14 @@ const handleSubmit = async (form: FormContext<GenericObject, GenericObject>) =>
         const password = form.values.password
         const token = await getShareToken(props.share_id, { password })
         if (!token) {
-            toast.error('密码错误')
+            toast.error(t('page.shareView.passwall.passwordError'))
             form.resetForm()
             return
         }
         props?.hide(token)
         return
     } catch (error) {
-        toast.error('密码错误')
+        toast.error(t('page.shareView.passwall.passwordError'))
         form.resetForm()
     }
 }
@@ -31,9 +32,9 @@ const handleSubmit = async (form: FormContext<GenericObject, GenericObject>) =>
 <template>
     <VeeForm>
         <div class="flex flex-col gap-5">
-            <div class="text-xl font-bold">输入密码</div>
-            <InputField name="password" type="password" rules="required" placeholder="请输入密码" />
-            <FormButton @click="handleSubmit">提交</FormButton>
+            <div class="text-xl font-bold">{{ t('page.shareView.passwall.title') }}</div>
+            <InputField name="password" type="password" rules="required" :placeholder="t('page.shareView.passwall.passwordPlaceholder')" />
+            <FormButton @click="handleSubmit">{{ t('btn.submit') }}</FormButton>
         </div>
     </VeeForm>
 </template>

front/components/Drawer/PickupShareDrawer.vue

@@ -1,57 +1,56 @@
 <script setup lang="ts">
-import VeeForm from "@/components/VeeForm.vue";
-import FormButton from "@/components/Field/FormButton.vue";
-import PinInputField from "@/components/Field/PinInputField.vue";
-import type { FormContext, GenericObject } from "vee-validate";
-import { toast } from "vue-sonner";
-const router = useRouter();
+import VeeForm from '@/components/VeeForm.vue'
+import FormButton from '@/components/Field/FormButton.vue'
+import PinInputField from '@/components/Field/PinInputField.vue'
+import type { FormContext, GenericObject } from 'vee-validate'
+import { toast } from 'vue-sonner'
+const router = useRouter()
+const { t } = useI18n()
 const props = defineProps<{
-  hide: () => void;
-}>();
-const handleSubmit = async (
-  form: FormContext<GenericObject, GenericObject>,
-) => {
-  try {
-    const code = form.values.code;
-    const data = await $fetch<{
-      data: {
-        share_id: string;
-      };
-    }>(`/api/share/pickup/${code}`);
-    if (!data.data.share_id) {
-      toast.error("取件码错误");
-      form.resetForm();
-      return;
+    hide: () => void
+}>()
+const handleSubmit = async (form: FormContext<GenericObject, GenericObject>) => {
+    try {
+        const code = form.values.code
+        const data = await $fetch<{
+            data: {
+                share_id: string
+            }
+        }>(`/api/share/pickup/${code}`)
+        if (!data.data.share_id) {
+            toast.error(t('page.upload.pickup.codeError'))
+            form.resetForm()
+            return
+        }
+        const { share_id } = data.data
+        props.hide()
+        router.push({
+            path: `/s/${share_id}`,
+        })
+        return
+    } catch (error) {
+        toast.error(t('page.upload.pickup.codeError'))
+        form.resetForm()
     }
-    const { share_id } = data.data;
-    props.hide();
-    router.push({
-      path: `/s/${share_id}`,
-    });
-    return;
-  } catch (error) {
-    toast.error("取件码错误");
-    form.resetForm();
-  }
-};
+}
 </script>
 
 <template>
-  <VeeForm>
-    <div class="flex flex-col gap-5">
-      <div class="text-xl font-bold">输入取件码</div>
-      <PinInputField
-        name="code"
-        :rules="
-          (value) => {
-            if (value?.length !== 4) {
-              return false;
-            }
-            return true;
-          }
-        "
-      />
-      <FormButton @click="handleSubmit">提交</FormButton>
-    </div>
-  </VeeForm>
+    <VeeForm>
+        <div class="flex flex-col gap-5">
+            <div class="text-xl font-bold">{{ t('page.upload.pickup.title') }}</div>
+            <PinInputField
+                name="code"
+                :rules="
+                    (value) => {
+                        if (value?.length !== 4) {
+                            return false
+                        }
+                        return true
+                    }
+                "
+            />
+            <FormButton @click="handleSubmit">{{ t('btn.submit') }}</FormButton>
+        </div>
+    </VeeForm>
 </template>

front/components/Drawer/QrCoreDrawer.vue

@@ -1,20 +1,21 @@
 <script setup lang="ts">
-import QRCode from "qrcode";
+import QRCode from 'qrcode'
+const { t } = useI18n()
 const props = defineProps<{
-  hide: () => void;
-  data: any;
-}>();
+    hide: () => void
+    data: any
+}>()
 const { state } = useAsyncState(async () => {
-  return await QRCode.toDataURL(props.data);
-}, null);
+    return await QRCode.toDataURL(props.data)
+}, null)
 </script>
 
 <template>
-  <div class="flex flex-col gap-5">
-    <div class="text-xl font-bold">分享二维码</div>
-    <div class="flex flex-row justify-center">
-      <img :src="state" v-if="!!state" />
-      <Skeleton class="size-20" v-else />
+    <div class="flex flex-col gap-5">
+        <div class="text-xl font-bold">{{ t('page.result.qrCode.title') }}</div>
+        <div class="flex flex-row justify-center">
+            <img :src="state" v-if="!!state" />
+            <Skeleton class="size-20" v-else />
+        </div>
     </div>
-  </div>
 </template>

front/components/Drawer/TextShareDrawer.vue

@@ -1,74 +1,77 @@
 <script setup lang="ts">
-import {
-  LucideShare,
-  LucideImage,
-  LucideBot,
-  LucideLanguages,
-} from "lucide-vue-next";
-import { cx } from "class-variance-authority";
-import showDrawer from "@/lib/showDrawer";
-import TextShareHandle from "@/components/Preprocessing/TextShareHandle.vue";
+import showDrawer from '@/lib/showDrawer'
+import TextShareHandle from '@/components/Preprocessing/TextShareHandle.vue'
+import { useFeatureMeta, type FeatureKey } from '@/composables/useFeatureMeta'
 
 const props = defineProps<{
-  hide: () => void;
-  text: string;
-  onTextHandle: ({ type, config }: { type: string; config: any }) => void;
-}>();
-const { t } = useI18n();
-const actions = [
-  {
-    label: t("text.handleType.text-share"),
-    icon: LucideShare,
-    className: "bg-green-300",
-    onClick: () => {
-      showDrawer({
-        render: ({ hide }) => h(TextShareHandle, { ...props, hide }),
-      });
+    hide: () => void
+    text: string
+    onTextHandle: ({ type, config }: { type: string; config: any }) => void
+}>()
+
+const featureMeta = useFeatureMeta()
+
+type ActionHandler = {
+    condition?: () => boolean
+    onClick: () => void
+}
+
+const actionHandlers: Partial<Record<FeatureKey, ActionHandler>> = {
+    'text-share': {
+        onClick: () => showDrawer({ render: ({ hide }) => h(TextShareHandle, { ...props, hide }) }),
     },
-  },
-  // {
-  //     label: '生成配图', icon: LucideImage, className: 'bg-red-300', onClick: () => {
-  //         console.log('复制链接')
-  //     }
-  // },
-  // {
-  //     label: '问大模型', icon: LucideBot, className: 'bg-blue-300', onClick: () => {
-  //         console.log('复制链接')
-  //     }
-  // },
-  // {
-  //     label: '文本翻译', icon: LucideLanguages, className: 'bg-orange-300', onClick: () => {
-  //         console.log('复制链接')
-  //     }
-  // },
-];
+    // 'text-translate': {
+    //     onClick: () =>
+    //         props.onTextHandle({
+    //             type: 'text-translate',
+    //             config: {
+    //                 source: 'auto',
+    //             },
+    //         }),
+    // },
+    // 'text-image-generate': {
+    //     label: '生成配图', icon: LucideImage, className: 'bg-red-300',
+    //     onClick: () => { console.log('复制链接') }
+    // },
+    // 'text-ai-ask': {
+    //     label: '问大模型', icon: LucideBot, className: 'bg-blue-300',
+    //     onClick: () => { console.log('复制链接') }
+    // },
+    // 'text-translate': {
+    //     label: '文本翻译', icon: LucideLanguages, className: 'bg-orange-300',
+    //     onClick: () => { console.log('复制链接') }
+    // },
+}
+
+const actions = computed(() =>
+    featureMeta.value
+        .filter((meta) => {
+            const { key } = meta || {}
+            const handler = actionHandlers?.[key]
+            return handler && (!handler.condition || handler.condition())
+        })
+        .map((meta) => ({ ...meta, onClick: actionHandlers[meta.key]!.onClick }))
+)
 </script>
 <template>
-  <div class="flex flex-col gap-5 p-5">
-    <div class="flex flex-row gap-2">
-      <div
-        v-for="item in actions"
-        :key="item.label"
-        class="flex flex-col items-center gap-2 max-w-20"
-        @click="
-          () => {
-            props?.hide();
-            item?.onClick();
-          }
-        "
-      >
-        <div
-          :class="
-            cx(
-              'size-14 flex justify-center items-center rounded-full mx-3',
-              item?.className,
-            )
-          "
-        >
-          <component :is="item?.icon" />
+    <div class="flex flex-col gap-5 p-5 overflow-x-auto">
+        <div class="flex flex-row gap-2">
+            <div
+                v-for="item in actions"
+                :key="item.key"
+                class="flex flex-col items-center gap-2 max-w-20"
+                @click="
+                    () => {
+                        props?.hide()
+                        item?.onClick()
+                    }
+                "
+            >
+                <div class="size-14 flex justify-center items-center rounded-full mx-3" :style="item?.style">
+                    <component :is="item?.icon" />
+                </div>
+                <div class="text-xs truncate w-full text-center">{{ item?.label }}</div>
+            </div>
         </div>
-        <div class="text-xs truncate w-full text-center">{{ item?.label }}</div>
-      </div>
     </div>
-  </div>
 </template>

front/components/Field/FileUploadField.vue

@@ -12,14 +12,25 @@ const props = defineProps<{
 }>()
 const { value, setValue } = useField<File[]>(props?.name, props?.rules)
 const { t } = useI18n()
+
+const filterOutSameFile = (files: File[] | undefined, targetFile: File[] | undefined) => {
+    return files?.filter((file) => !targetFile?.some((r) => r?.name === file?.name && r?.type === file?.type && r?.size === file?.size)) || []
+}
+
+useEventListener(document, 'paste', (evt: ClipboardEvent) => {
+    const { files } = evt.clipboardData || {}
+    if (files?.length) {
+        setValue([...filterOutSameFile(value?.value, Array.from(files)), ...Array.from(files)])
+    }
+})
 </script>
 
 <template>
     <FileUpload
         @onChange="
-            (file) => {
+            (files) => {
                 // 这里没hash，我们姑且认为name和size,type都一样的为同一个文件
-                setValue([...(value?.filter((r) => r?.name !== file?.name || r?.type !== file?.type || r?.size !== file?.size) || []), file])
+                setValue([...filterOutSameFile(value, files), ...files])
             }
         "
         v-slot="{ isOverDropZone }"
@@ -39,11 +50,9 @@ const { t } = useI18n()
                             <Button
                                 class="size-5 p-0 bg-red-500/20 hover:bg-red-500/60 text-red-500 hover:text-white"
                                 @click="
-                                    (e) => {
+                                    (e: any) => {
                                         e.stopPropagation()
-                                        setValue(
-                                            value?.filter((r) => r?.name !== item?.name || r?.type !== item?.type || r?.size !== item?.size) || []
-                                        )
+                                        setValue(filterOutSameFile(value, [item]))
                                     }
                                 "
                             >
@@ -56,14 +65,14 @@ const { t } = useI18n()
                         <div class="size-16 flex justify-center items-center rounded-xl bg-white/80">
                             <PlusIcon class="size-7" />
                         </div>
-                        <div class="mb-3">添加更多</div>
+                        <div class="mb-3">{{ t('page.upload.file.addMore') }}</div>
                     </div>
                 </div>
             </template>
             <template v-else>
                 <LucideUpload class="size-10" />
-                <div class="text-sm">
-                    {{ t('file.uploadFilePlaceholder') }}
+                <div class="text-sm select-none">
+                    {{ t('page.upload.file.uploadFilePlaceholder') }}
                 </div>
             </template>
         </div>

front/components/Field/InputField.vue

@@ -1,16 +1,20 @@
-<template>
-    <Field :name="props.name" v-slot="{ field }">
-        <div class="flex flex-col gap-2">
-            <Label v-if="props.label">{{ props.label }}</Label>
-            <Input v-bind="{ ...field, ...$attrs }" />
-        </div>
-    </Field>
-</template>
 <script setup lang="ts">
 import { Label } from '@/components/ui/label'
 import { Input } from '@/components/ui/input'
+import type { RuleExpression } from 'vee-validate'
+
 const props = defineProps<{
     name: string
     label?: string
+    rules?: RuleExpression<string>
 }>()
+
+const { value, errorMessage } = useField<string>(props.name, props.rules)
 </script>
+
+<template>
+    <div class="flex flex-col gap-2">
+        <Label v-if="props.label">{{ props.label }}</Label>
+        <Input v-model="value" :aria-invalid="!!errorMessage || undefined" v-bind="$attrs" />
+    </div>
+</template>

front/components/Field/InputGroupField.vue

@@ -0,0 +1,37 @@
+<script setup lang="ts">
+import { Label } from '@/components/ui/label'
+import type { RuleExpression } from 'vee-validate'
+const props = defineProps<{
+    name: string
+    label?: string
+    rules?: RuleExpression<string[]>
+}>()
+const { t } = useI18n()
+const { value, setValue, errorMessage } = useField<string[]>(props.name, props?.rules)
+</script>
+
+<template>
+    <div class="flex flex-col gap-2">
+        <Label v-if="label">{{ label }}</Label>
+        <div v-for="(item, index) in value" class="flex flex-row gap-2 items-center">
+            <Input
+                :model-value="item"
+                @update:model-value="(v: string | number) => setValue(value.map((o, i) => (i === index ? String(v) : o)))"
+                :aria-invalid="!!errorMessage || undefined"
+                v-bind="$attrs"
+            />
+            <Button
+                variant="ghost"
+                size="icon"
+                class="bg-red-500/10 text-red-500 hover:bg-red-500 hover:text-white"
+                @click="setValue(value.filter((_, i) => i !== index))"
+            >
+                <LucideTrash class="size-4" />
+            </Button>
+        </div>
+        <Button class="self-start" size="sm" @click="() => setValue([...(value || []), ''])">
+            <LucidePlus class="size-4" />
+            {{ t('common.add') }}
+        </Button>
+    </div>
+</template>

front/components/Field/KvInputGroupField.vue

@@ -0,0 +1,102 @@
+<script setup lang="ts">
+import { Label } from '@/components/ui/label'
+import { AutocompleteAnchor, AutocompleteContent, AutocompleteInput, AutocompleteItem, AutocompleteRoot, AutocompleteViewport } from 'reka-ui'
+import type { Component } from 'vue'
+import InputField from '../Field/InputField.vue'
+
+type KvInputValueComponentConfig = [(key: string) => boolean, Component]
+
+type KvInputConfig = {
+    key?: {
+        placeholder?: string
+        enum?: string[]
+    }
+    value?: {
+        placeholder?: string
+        component?: KvInputValueComponentConfig[]
+        default?: Component
+    }
+}
+
+const defaultConfig = {
+    key: {},
+    value: {
+        default: InputField,
+    },
+} satisfies Required<KvInputConfig>
+
+const props = defineProps<{
+    name: string
+    label?: string
+    config?: KvInputConfig
+}>()
+
+const { t } = useI18n()
+const config = computed(() => {
+    return {
+        key: { ...defaultConfig.key, ...(props.config?.key ?? {}) },
+        value: { ...defaultConfig.value, ...(props.config?.value ?? {}) },
+    }
+})
+
+const { value, setValue } = useField<[string, string][]>(props.name)
+
+const updateKey = (index: number, nextKey: string | number) => {
+    const next = [...(value.value ?? [])]
+    next[index] = [String(nextKey), next[index]?.[1] ?? '']
+    setValue(next)
+}
+</script>
+
+<template>
+    <div class="flex flex-col gap-2">
+        <Label v-if="label">{{ label }}</Label>
+        <div v-for="([key, _], index) in value" class="flex flex-row gap-2 items-center">
+            <AutocompleteRoot class="basis-40 relative" :model-value="String(key ?? '')" @update:model-value="(v) => updateKey(index, v)">
+                <AutocompleteAnchor>
+                    <AutocompleteInput
+                        class="w-full placeholder:text-muted-foreground selection:bg-primary selection:text-primary-foreground dark:bg-input/30 border-input flex h-9 min-w-0 rounded-md border bg-transparent px-3 py-1 text-base shadow-xs transition-[color,box-shadow] outline-none file:inline-flex disabled:pointer-events-none disabled:cursor-not-allowed disabled:opacity-50 md:text-sm"
+                        :placeholder="config.key.placeholder"
+                    >
+                    </AutocompleteInput>
+                </AutocompleteAnchor>
+                <AutocompleteContent
+                    v-if="config.key?.enum"
+                    class="bg-popover border rounded-md shadow-md z-50 w-(--reka-autocomplete-trigger-width) absolute inset-x-0"
+                >
+                    <AutocompleteViewport class="p-1">
+                        <AutocompleteItem
+                            v-for="opt in config.key?.enum"
+                            :key="opt"
+                            :value="opt"
+                            class="relative flex cursor-default select-none items-center rounded-sm px-2 py-1.5 text-sm outline-none data-highlighted:bg-accent data-highlighted:text-accent-foreground"
+                        >
+                            {{ opt }}
+                        </AutocompleteItem>
+                    </AutocompleteViewport>
+                </AutocompleteContent>
+            </AutocompleteRoot>
+            <div class="flex-1">
+                <component
+                    :is="config.value.component?.find(([isMatchCom]) => isMatchCom(key))?.[1] ?? config.value.default"
+                    :name="`${props.name}[${index}][1]`"
+                    :placeholder="config.value.placeholder"
+                    class="w-full"
+                />
+            </div>
+            <Button
+                type="button"
+                variant="ghost"
+                size="icon"
+                class="bg-red-500/10 text-red-500 hover:bg-red-500 hover:text-white"
+                @click="() => setValue(value?.filter((_, i) => i !== index))"
+            >
+                <LucideTrash class="size-4" />
+            </Button>
+        </div>
+        <Button type="button" class="self-start" size="sm" @click="() => setValue([...(value ?? []), ['', '']])">
+            <LucidePlus class="size-4" />
+            {{ t('common.add') }}
+        </Button>
+    </div>
+</template>

front/components/Field/MarkdownInputField.vue

@@ -3,11 +3,11 @@
 </template>
 
 <script setup lang="ts">
-import Tiptap from '@/components/Tiptap.vue'
+import Tiptap from '@/components/Tiptap/Index.vue'
 import type { RuleExpression } from 'vee-validate'
 const props = defineProps<{
     name: string
     rules?: RuleExpression<string>
 }>()
-const { value, } = useField<string>(props.name, props.rules)
+const { value } = useField<string>(props.name, props.rules)
 </script>

front/components/Field/SelectField.vue

@@ -1,13 +1,5 @@
 <script setup lang="ts">
-import {
-    Select,
-    SelectContent,
-    SelectGroup,
-    SelectItem,
-    SelectLabel,
-    SelectTrigger,
-    SelectValue,
-} from '@/components/ui/select'
+import { Select, SelectContent, SelectGroup, SelectItem, SelectLabel, SelectTrigger, SelectValue } from '@/components/ui/select'
 import type { RuleExpression } from 'vee-validate'
 type SelectValue = string | number
 const props = defineProps<{
@@ -19,13 +11,14 @@ const props = defineProps<{
         label?: string
         value: SelectValue
     }[]
+    class?: string
 }>()
 const { value } = useField<SelectValue>(props.name, props?.rules)
 </script>
 
 <template>
     <Select v-model="value">
-        <SelectTrigger>
+        <SelectTrigger :class="class">
             <SelectValue :placeholder="placeholder" />
         </SelectTrigger>
         <SelectContent>
@@ -37,4 +30,4 @@ const { value } = useField<SelectValue>(props.name, props?.rules)
             </SelectGroup>
         </SelectContent>
     </Select>
-</template>
+</template>

front/components/Field/TextareaField.vue

@@ -0,0 +1,25 @@
+<script setup lang="ts">
+import { Label } from '@/components/ui/label'
+import { Textarea } from '@/components/ui/textarea'
+
+const props = withDefaults(
+    defineProps<{
+        name: string
+        label?: string
+        placeholder?: string
+        rows?: number
+    }>(),
+    {
+        rows: 3,
+    }
+)
+
+const { value } = useField<string>(props.name)
+</script>
+
+<template>
+    <div class="flex flex-col gap-2">
+        <Label v-if="label">{{ label }}</Label>
+        <Textarea v-model="value" :placeholder="placeholder" :rows="rows" v-bind="$attrs" />
+    </div>
+</template>

front/components/FileIcon/File.vue

@@ -1,38 +1,19 @@
 <script setup lang="ts">
-import { cx } from 'class-variance-authority'
-export type filePreview = {
-    type: string
-    name: string
-    size: number
-}
-
 import { LucideFileAudio, LucideFileVideo, LucideFile, LucideFileCode, LucideFileArchive, LucideFileText } from 'lucide-vue-next'
+import type { filePreview } from './Index.vue'
+
 const props = defineProps<{
     file: File | filePreview
-    class?: string
 }>()
-const imageUrl = computed(() => {
-    if (props?.file?.type?.startsWith('image/') && props?.file instanceof File) {
-        return URL.createObjectURL(props?.file)
-    }
-    return null
-})
-
-onUnmounted(() => {
-    if (imageUrl.value) {
-        URL.revokeObjectURL(imageUrl.value)
-    }
-})
-
 const fileIcon = computed(() => {
     const [baseType, type] = props?.file?.type?.split('/')
-    if (baseType === 'video') {
-        return LucideFileVideo
-    }
+    // if (baseType === 'video') {
+    //     return LucideFileVideo
+    // }
     if (baseType === 'audio') {
         return LucideFileAudio
     }
-    if (baseType === 'text' || ['json', 'ld+json', 'html']?.includes(type)) {
+    if (baseType === 'text' || ['json', 'ld+json', 'html']?.includes(type ?? '')) {
         return LucideFileCode
     }
     if (
@@ -44,11 +25,11 @@ const fileIcon = computed(() => {
             'vnd.openxmlformats-officedocument.spreadsheetml.sheet',
             'vnd.ms-powerpoint',
             'vnd.openxmlformats-officedocument.presentationml.presentation',
-        ].includes(type)
+        ].includes(type ?? '')
     ) {
         return LucideFileText
     }
-    if (['zip', 'vnd.rar', 'x-tar', 'gz', 'bz2', 'x-7z-compressed'].includes(type)) {
+    if (['zip', 'vnd.rar', 'x-tar', 'gz', 'bz2', 'x-7z-compressed'].includes(type ?? '')) {
         return LucideFileArchive
     }
     return LucideFile
@@ -56,12 +37,5 @@ const fileIcon = computed(() => {
 </script>
 
 <template>
-    <div v-if="!!imageUrl" class="flex max-w-30 max-h-20">
-        <div class="object-contain m-auto h-full">
-            <img :src="imageUrl" class="w-full h-full border border-black/20 rounded" />
-        </div>
-    </div>
-    <div v-if="!imageUrl" :class="cx('flex justify-center items-center rounded-xl bg-white/80 size-16', props?.class)">
-        <component :is="fileIcon" class="size-[62.5%]" />
-    </div>
+    <component :is="fileIcon" />
 </template>

front/components/FileIcon/Image.vue

@@ -0,0 +1,29 @@
+<script setup lang="ts">
+import { isHeic, heicTo } from 'heic-to'
+
+const props = defineProps<{
+    file: File
+}>()
+
+const { state: imageUrl } = useAsyncState(async () => {
+    let blob: Blob = props?.file
+    if (await isHeic(props?.file)) {
+        blob = await heicTo({
+            blob: props?.file,
+            type: 'image/jpeg',
+            quality: 1,
+        })
+    }
+    return URL.createObjectURL(blob)
+}, null)
+
+onUnmounted(() => {
+    if (imageUrl.value) {
+        URL.revokeObjectURL(imageUrl.value)
+    }
+})
+</script>
+
+<template>
+    <img v-if="!!imageUrl" :src="imageUrl" />
+</template>

front/components/FileIcon/Index.vue

@@ -0,0 +1,61 @@
+<script setup lang="ts">
+import { cx } from 'class-variance-authority'
+import FileIcon from './File.vue'
+import ImageIcon from './Image.vue'
+import VideoIcon from './Video.vue'
+import { fileTypeFromBuffer } from 'file-type'
+
+export type filePreview = {
+    type: string
+    name: string
+    size: number
+}
+
+const props = withDefaults(
+    defineProps<{
+        file: File | filePreview
+        class?: string
+        size?: 'sm' | 'md' | 'lg'
+    }>(),
+    {
+        size: 'md',
+    }
+)
+const isFile = computed(() => props?.file instanceof File)
+const { state: fileType } = useAsyncState(async () => {
+    if (!isFile.value) {
+        return null
+    }
+    if (!!props?.file?.type) {
+        return props?.file?.type
+    }
+    const { mime } = (await fileTypeFromBuffer(await (props?.file as File)?.arrayBuffer())) || {}
+    return mime
+}, null)
+
+const isImage = computed(() => isFile.value && fileType.value?.startsWith('image/'))
+const isVideo = computed(() => isFile.value && fileType.value?.startsWith('video/'))
+</script>
+
+<template>
+    <div v-if="isImage || isVideo" :class="cx('flex overflow-hidden', size === 'sm' && 'max-w-20 max-h-16', size === 'md' && 'max-w-30 max-h-20')">
+        <component
+            :is="isImage ? ImageIcon : VideoIcon"
+            :file="props?.file as File"
+            class="block max-w-full max-h-full object-contain border border-black/20 rounded"
+        />
+    </div>
+    <div
+        v-else
+        :class="
+            cx(
+                'flex justify-center items-center bg-white/80',
+                size === 'sm' && 'size-7 rounded-md',
+                size === 'md' && 'size-16 rounded-xl',
+                props?.class
+            )
+        "
+    >
+        <component :is="FileIcon" :file="props?.file" class="size-[62.5%]" />
+    </div>
+</template>

front/components/FileIcon/Video.vue

@@ -0,0 +1,27 @@
+<script setup lang="ts">
+import getVideoFileThumbnail from '@/lib/getVideoFileThumbnail'
+
+const props = defineProps<{
+    file: File
+}>()
+
+const { state: thumbnailUrl } = useAsyncState(async () => {
+    if (props.file.type.startsWith('video/')) {
+        return await getVideoFileThumbnail(props.file)
+    }
+    return null
+}, null)
+
+onUnmounted(() => {
+    if (!!thumbnailUrl.value) {
+        URL.revokeObjectURL(thumbnailUrl.value)
+    }
+})
+</script>
+
+<template>
+    <div v-if="thumbnailUrl" class="relative grayscale-50 overflow-hidden">
+        <img :src="thumbnailUrl" class="object-contain block max-w-full max-h-full" />
+        <LucidePlay class="size-[40%] absolute top-1/2 left-1/2 -translate-x-1/2 -translate-y-1/2 text-white" />
+    </div>
+</template>

front/components/FilePreviewView.vue

@@ -1,6 +1,6 @@
 <script lang="ts" setup>
 import getFileSize from '~/lib/getFileSize'
-import type { filePreview } from './FileIcon.vue'
+import type { filePreview } from './FileIcon/Index.vue'
 const props = defineProps<{
     value: File | filePreview
 }>()

front/components/FileUpload.vue

@@ -3,63 +3,63 @@ import { useDropZone } from '@vueuse/core'
 const dropZoneRef = ref()
 
 const props = defineProps<{
-  accept?: string[]
+    accept?: string[]
 }>()
 
 const accept = computed(() => (props?.accept || ['*'])?.join(','))
 
 const emit = defineEmits<{
-  (e: 'onChange', file: File): void
+    (e: 'onChange', file: File[]): void
 }>()
 
 const { isOverDropZone } = useDropZone(dropZoneRef, {
-  onDrop: (file) => {
-    if (file?.[0]) {
-      emit('onChange', file?.[0])
-    }
-  },
-  // 指定要接收的数据类型
-  dataTypes: (types) => {
-    for (const type of types) {
-      for (const acceptType of accept.value.split(',')) {
-        if (acceptType === '*') {
-          return true
+    onDrop: (file) => {
+        if (!!file && file?.length > 0) {
+            emit('onChange', file)
         }
-        if (acceptType?.endsWith('*')) {
-          const [acceptTypePrefix,] = acceptType?.split('/')
-          if (!acceptTypePrefix) {
-            return true
-          }
-          if (type?.startsWith(acceptTypePrefix)) {
-            return true
-          }
+    },
+    // 指定要接收的数据类型
+    dataTypes: (types) => {
+        for (const type of types) {
+            for (const acceptType of accept.value.split(',')) {
+                if (acceptType === '*') {
+                    return true
+                }
+                if (acceptType?.endsWith('*')) {
+                    const [acceptTypePrefix] = acceptType?.split('/')
+                    if (!acceptTypePrefix) {
+                        return true
+                    }
+                    if (type?.startsWith(acceptTypePrefix)) {
+                        return true
+                    }
+                }
+                if (acceptType === type) {
+                    return true
+                }
+            }
         }
-        if (acceptType === type) {
-          return true
-        }
-      }
-    }
-    return false
-  },
-  // 控制多文件拖放
-  multiple: false,
-  // 是否阻止未处理事件的默认行为
-  preventDefaultForUnhandled: false,
+        return false
+    },
+    // 控制多文件拖放
+    multiple: true,
+    // 是否阻止未处理事件的默认行为
+    preventDefaultForUnhandled: false,
 })
 
 const { open, onChange } = useFileDialog({
-  accept: accept.value, // Set to accept only image files
-  directory: false,
+    accept: accept.value, // Set to accept only image files
+    directory: false,
 })
 onChange((files) => {
-  if (files?.[0]) {
-    emit('onChange', files?.[0])
-  }
+    if (!!files && files?.length > 0) {
+        emit('onChange', Array.from(files))
+    }
 })
 </script>
 
 <template>
-  <div ref="dropZoneRef" @click="open">
-    <slot :isOverDropZone="isOverDropZone" />
-  </div>
-</template>
+    <div ref="dropZoneRef" @click="() => open()">
+        <slot :isOverDropZone="isOverDropZone" />
+    </div>
+</template>

front/components/GlobalDayjs.vue

@@ -0,0 +1,16 @@
+<script setup lang="ts">
+import dayjs from 'dayjs'
+import relativeTime from 'dayjs/plugin/relativeTime'
+import 'dayjs/locale/en'
+import 'dayjs/locale/zh-cn'
+
+dayjs.extend(relativeTime)
+
+const { locale } = useI18n()
+
+watchEffect(() => {
+    dayjs.locale(locale.value.toLowerCase())
+})
+</script>
+
+<template></template>

front/components/GlobalDrawer.vue

@@ -1,35 +1,44 @@
 <script setup lang="ts">
 import { Drawer, DrawerContent } from '@/components/ui/drawer'
-import { createVNode } from 'vue'
+import type { VNode } from 'vue'
 import useStore from '@/composables/useStore'
+import { isFunction } from 'lodash-es'
+
+type DrawerOnclose<T = unknown> = (data?: T) => Promise<void>
+type DrawerRender<T = unknown> = VNode | ((props: { hide: DrawerOnclose<T> }) => VNode)
+export type DrawerItem<T = unknown> = {
+    render?: DrawerRender<T>
+    onClose: DrawerOnclose<T>
+    key: string
+    visible: boolean
+}
 
 const store = useStore()
-const currentDrawer = computed(() => store.drawer?.[store.drawer?.length - 1])
 
-const render = computed(() => currentDrawer?.value?.render)
-const hide = computed(() => currentDrawer?.value?.onClose)
-const Children = () =>
-    render.value
-        ? createVNode(render.value, {
-              hide: hide?.value,
-          })
-        : null
+const Children = ({ drawer }: { drawer: DrawerItem }) => {
+    if (!drawer.render) {
+        return null
+    }
+    return isFunction(drawer.render) ? drawer.render({ hide: drawer.onClose }) : drawer.render
+}
 </script>
 
 <template>
     <Drawer
-        :open="!!store.drawer?.[store.drawer?.length - 1]"
+        v-for="item in store.drawer"
+        :key="item.key"
+        :open="item.visible"
         @update:open="
             (open) => {
-                if (!open && store?.drawer?.length && hide) {
-                    hide()
+                if (!open) {
+                    item.onClose()
                 }
             }
         "
     >
         <DrawerContent>
-            <div class="mx-auto w-full max-w-sm pb-10 px-3">
-                <Children />
+            <div class="mx-auto min-w-lg max-w-[80vw] pb-10 px-3">
+                <Children :drawer="item" />
             </div>
         </DrawerContent>
     </Drawer>

front/components/Home/File/FileUploadIndexView.vue

@@ -1,7 +1,7 @@
 <script lang="ts" setup>
 import VeeForm from '@/components/VeeForm.vue'
 import FileUploadInputFileView from './FileUploadInputFileView.vue'
-import FileUploadProgressView from './FileUploadProgressView.vue'
+import FileUploadProgressView from './FileUploadProgressView/index.vue'
 import ResultIndexView from '@/components/Result/ResultIndexView.vue'
 
 const fileStepList = [
@@ -16,19 +16,26 @@ const renderComponent = computed(() => {
     return fileStepList.find((item) => item.key === step.value)?.component
 })
 const formRef = ref<InstanceType<typeof VeeForm>>()
-watch(() => step.value, (newVal) => {
-    if (newVal === 'input') {
-        formRef.value?.form?.resetForm()
-        formRef.value?.form?.setValues({ file: null })
+watch(
+    () => step.value,
+    (newVal) => {
+        if (newVal === 'input') {
+            formRef.value?.form?.resetForm()
+            formRef.value?.form?.setValues({ file: null })
+        }
     }
-})
+)
 </script>
 <template>
     <VeeForm ref="formRef" v-slot="{ values }" :keepValues="true">
-        <div class="rounded-xl p-5 bg-white/50 backdrop-blur-xl w-full lg:w-200">
-            <component :is="renderComponent" :data="values" @change="(key: string) => {
-                step = key
-            }" />
-        </div>
+        <component
+            :is="renderComponent"
+            :data="values"
+            @change="
+                (key: string) => {
+                    step = key
+                }
+            "
+        />
     </VeeForm>
-</template>
+</template>

front/components/Home/File/FileUploadInputFileView.vue

@@ -1,42 +1,39 @@
 <script lang="ts" setup>
-import showDrawer from "@/lib/showDrawer";
-import FileShareDrawer from "@/components/Drawer/FileShareDrawer.vue";
-import FileUploadField from "@/components/Field/FileUploadField.vue";
-import FormButton from "@/components/Field/FormButton.vue";
-import PickupShareBtn from "@/components/PickupShareBtn.vue";
+import showDrawer from '@/lib/showDrawer'
+import FileShareDrawer from '@/components/Drawer/FileShareDrawer.vue'
+import FileUploadField from '@/components/Field/FileUploadField.vue'
+import FormButton from '@/components/Field/FormButton.vue'
+import PickupShareBtn from '@/components/PickupShareBtn.vue'
 
 const emit = defineEmits<{
-  (e: "change", key: string): void;
-}>();
+    (e: 'change', key: string): void
+}>()
 
-const { t } = useI18n();
+const { t } = useI18n()
 
 const handleFormSubmit = async (form: any) => {
-  const { file } = form?.values || {};
-  showDrawer({
-    render: ({ hide }) =>
-      h(FileShareDrawer, {
-        hide,
-        file,
-        onFileHandle: ({ type, config }) => {
-          form.setFieldValue("handle_type", type);
-          form.setFieldValue("config", config);
-          emit("change", "progress");
-        },
-      }),
-  });
-};
+    const { file } = form?.values || {}
+    showDrawer({
+        render: ({ hide }) =>
+            h(FileShareDrawer, {
+                hide,
+                file,
+                onFileHandle: ({ type, config }) => {
+                    form.setFieldValue('handle_type', type)
+                    form.setFieldValue('config', config)
+                    emit('change', 'progress')
+                },
+            }),
+    })
+}
 </script>
 
 <template>
-  <div class="gap-5 flex flex-col">
-    <div class="text-xl font-normal">{{ t("file.uploadFile") }}</div>
-    <FileUploadField name="file" rules="required" />
-    <div class="flex flex-row gap-3">
-      <FormButton @click="handleFormSubmit">
-        <LucideShare class="size-4" />{{ t("btn.submit") }}
-      </FormButton>
-      <PickupShareBtn />
-    </div>
-  </div>
+    <BaseCard class="gap-5 flex flex-col" :title="t('page.upload.file.uploadFile')">
+        <FileUploadField name="file" rules="required" />
+        <div class="flex flex-row gap-3">
+            <FormButton @click="handleFormSubmit"> <LucideShare class="size-4" />{{ t('btn.submit') }} </FormButton>
+            <PickupShareBtn />
+        </div>
+    </BaseCard>
 </template>

front/components/Home/File/FileUploadProgressView/FileUploadDetailView.vue

@@ -0,0 +1,61 @@
+<script setup lang="ts">
+import getFileSize from '~/lib/getFileSize'
+import { clamp } from 'lodash-es'
+import FileUploadBlockProgressView from '@/components/FileUploadBlockProgressView.vue'
+import FileUploadHeatMapView from '@/components/FileUploadHeatMapView.vue'
+import type { SelectedFile, Uploadfile } from './types'
+
+const { t } = useI18n()
+
+const props = defineProps<{
+    uploadfiles: Uploadfile[]
+    selectedFile: SelectedFile
+}>()
+const selectedUploadfile = computed(() => props.uploadfiles.find((item) => item.fileId === props.selectedFile))
+const selectedUploadfileChunk = computed(() => Object.values(selectedUploadfile.value?.uploadInfo?.chunks || {}))
+const selectedUploadfileViewMode = ref<'progress' | 'heatmap'>('progress')
+</script>
+
+<template>
+    <div class="col-span-4 flex flex-col bg-white/80 rounded-xl p-3 gap-5" v-if="selectedFile">
+        <div class="flex flex-row gap-2 items-center">
+            <LucideInfo class="size-4" />
+            {{ t('page.progress.file.uploadDetails') }}
+        </div>
+        <div class="grid grid-cols-3 text-sm gap-3">
+            <div>
+                {{ t('page.progress.file.chunk') }}: {{ selectedUploadfile?.uploadInfo?.chunkLength }} x
+                {{ getFileSize(selectedUploadfile?.uploadInfo?.ChunkSize as number) }}
+            </div>
+            <div class="truncate col-span-2">Hash: {{ selectedUploadfile?.hash }}</div>
+            <div>{{ t('page.progress.file.completed') }}: {{ selectedUploadfileChunk?.filter((r) => r.status === 'success')?.length || 0 }}</div>
+            <div>{{ t('page.progress.file.discarded') }}: {{ selectedUploadfileChunk?.filter((r) => r.status === 'error')?.length || 0 }}</div>
+            <div>
+                {{ t('page.progress.file.pending') }}:
+                {{ (selectedUploadfile?.uploadInfo?.chunkLength || 0) - (selectedUploadfileChunk?.length || 0) }}
+            </div>
+            <div class="col-span-3 flex flex-row justify-between items-center">
+                <div class="text-md font-bold">
+                    {{ selectedUploadfileViewMode === 'progress' ? t('page.progress.file.chunkProgress') : t('page.progress.file.chunkHeatmap') }}
+                </div>
+                <Button
+                    size="sm"
+                    class="ml-auto text-xs"
+                    @click="selectedUploadfileViewMode = selectedUploadfileViewMode === 'progress' ? 'heatmap' : 'progress'"
+                >
+                    <LucideArrowDownUp class="size-4" />
+                    {{ selectedUploadfileViewMode === 'progress' ? t('page.progress.file.heatmap') : t('page.progress.file.progressBar') }}
+                </Button>
+            </div>
+            <div class="h-7 col-span-3 flex flex-row gap-2 items-center" v-if="selectedUploadfileViewMode === 'progress'">
+                <div class="flex-1 h-full">
+                    <FileUploadBlockProgressView :data="selectedUploadfile?.uploadInfo" />
+                </div>
+                {{ clamp(((selectedUploadfileChunk?.length || 0) / (selectedUploadfile?.uploadInfo?.chunkLength || 0)) * 100, 0, 100)?.toFixed(2) }}%
+            </div>
+            <div v-if="selectedUploadfileViewMode === 'heatmap'" class="col-span-3 bg-black/5 rounded p-2">
+                <FileUploadHeatMapView :size="12" :data="selectedUploadfile?.uploadInfo" />
+            </div>
+        </div>
+    </div>
+</template>

front/components/Home/File/FileUploadProgressView/FileUploadSpeedInfoView.vue

@@ -0,0 +1,18 @@
+<script setup lang="ts">
+const { t } = useI18n()
+</script>
+<template>
+    <div class="flex flex-col gap-2 pt-3">
+        <div class="text-xl font-bold">{{ t('page.progress.file.uploadSpeedInfo.title') }}</div>
+        <div class="opacity-75">
+            <i18n-t keypath="page.progress.file.uploadSpeedInfo.desc.base">
+                <template #chunkNum>
+                    <b>{{ t('page.progress.file.uploadSpeedInfo.desc.chunkNum') }}</b>
+                </template>
+                <template #chunkSize>
+                    <b>{{ t('page.progress.file.uploadSpeedInfo.desc.chunkSize') }}</b>
+                </template>
+            </i18n-t>
+        </div>
+    </div>
+</template>

front/components/Home/File/FileUploadProgressView/FileUploadTotalProgressControlView.vue

@@ -0,0 +1,78 @@
+<script setup lang="ts">
+import type { Uploadfile } from './types'
+
+const { t } = useI18n()
+
+const { uploadfiles } = defineProps<{
+    uploadfiles: Uploadfile[]
+}>()
+const totalTaskStatus = computed(() => {
+    if (uploadfiles.some((r) => r.status === 'start')) {
+        return 'start'
+    }
+    if (uploadfiles.some((r) => r.status === 'pause')) {
+        return 'pause'
+    }
+    return 'disabled'
+})
+const totalUploadProgress = computed(() => {
+    const successCount = uploadfiles.reduce((acc, curr) => {
+        const { status, uploadInfo } = curr || {}
+        if (status === 'finish') return acc
+        const { chunks } = uploadInfo || {}
+        return acc + Object.entries(chunks || {}).filter(([index, chunk]) => chunk.status === 'success').length
+    }, 0)
+    const totalCount = uploadfiles.reduce((acc, curr) => {
+        const { status, uploadInfo } = curr || {}
+        if (status === 'finish') return acc
+        const { chunkLength } = uploadInfo || {}
+        return acc + (chunkLength || 0)
+    }, 0)
+    return ((successCount || 0) / (totalCount || 0)) * 100
+})
+</script>
+
+<template>
+    <div class="rounded-xl col-span-4 md:col-span-1 bg-white/80 h-32 md:h-auto md:aspect-square flex flex-col gap-2 relative overflow-hidden">
+        <div class="absolute top-0 left-0 w-full h-full z-[0] flex flex-col justify-end">
+            <div class="w-full bg-green-100 border-t border-green-500" :style="`height: ${totalUploadProgress || 0}%`"></div>
+        </div>
+        <div class="flex flex-col gap-2 justify-between p-3 h-full relative z-[1]">
+            <div class="flex flex-col gap-1">
+                <div class="text-xs opacity-70">{{ t('page.progress.file.totalUploadProgress') }}</div>
+                <div class="text-4xl font-bold">{{ (totalUploadProgress || 0).toFixed(1) }}%</div>
+            </div>
+            <div class="flex flex-row gap-2">
+                <Button
+                    class="aspect-square hover:text-white p-0 bg-green-200 hover:bg-green-300 text-green-500"
+                    :disabled="['start', 'disabled'].includes(totalTaskStatus)"
+                    @click="
+                        () => {
+                            uploadfiles.forEach((r) => {
+                                r.status = 'start'
+                            })
+                        }
+                    "
+                >
+                    <LucidePlay class="size-1/2" />
+                </Button>
+                <Button
+                    class="aspect-square hover:text-white p-0 bg-orange-200 hover:bg-orange-300 text-orange-500"
+                    :disabled="['pause', 'disabled'].includes(totalTaskStatus)"
+                    @click="
+                        () => {
+                            uploadfiles.forEach((r) => {
+                                r.status = 'pause'
+                            })
+                        }
+                    "
+                >
+                    <LucideSquare class="size-1/2" />
+                </Button>
+                <!-- <Button class="aspect-square bg-blue-200 hover:bg-blue-300 text-blue-500 hover:text-white p-0">
+                        <LucideSettings class="size-1/2" />
+                    </Button> -->
+            </div>
+        </div>
+    </div>
+</template>

front/components/Home/File/FileUploadProgressView/FileUploadTotalSpeedView.vue

@@ -0,0 +1,60 @@
+<script setup lang="ts">
+import dayjs from 'dayjs'
+import { motion } from 'motion-v'
+import getFileSize from '~/lib/getFileSize'
+import showDrawer from '~/lib/showDrawer'
+import FileUploadSpeedInfoView from './FileUploadSpeedInfoView.vue'
+import { clamp } from 'lodash-es'
+
+const { t } = useI18n()
+
+const props = defineProps<{
+    speedChartData: Record<string, { fileId: string; index: number; value: number }[]>
+}>()
+const speedChartList = ref<{ timestamp: number; value: number }[]>([])
+useIntervalFn(() => {
+    speedChartList.value.push({
+        timestamp: dayjs().unix() - 1,
+        value: props.speedChartData[dayjs().unix() - 1]?.reduce((acc, curr) => acc + curr.value, 0) ?? 0,
+    })
+    if (speedChartList.value.length > 60) {
+        speedChartList.value.shift()
+    }
+}, 1000)
+
+const handleShowSpeedInfo = () => {
+    showDrawer({
+        render: ({ hide }) => h(FileUploadSpeedInfoView, { hide }),
+    })
+}
+</script>
+<template>
+    <div class="rounded-xl p-3 bg-white/80 flex flex-col gap-2 col-span-4 md:col-span-3 h-32 md:h-auto">
+        <div class="flex flex-col gap-1">
+            <div @click="handleShowSpeedInfo" class="flex flex-row gap-1 items-center text-xs opacity-70">
+                {{ t('page.progress.file.totalUploadProgress') }}
+                <LucideInfo class="size-3" />
+            </div>
+            <div class="text-2xl font-bold">
+                {{ `${getFileSize(speedChartData[dayjs().unix() - 1]?.reduce((acc, curr) => acc + curr.value, 0) ?? 0) ?? 0}/s` }}
+            </div>
+        </div>
+        <div class="flex-1 relative overflow-hidden flex flex-row gap-0.5 justify-end items-end">
+            <motion.div
+                class="w-2 shrink-0 bg-primary relative"
+                :style="{
+                    height: `${clamp((i.value / Math.max(...(speedChartList?.map((r) => r.value) || [1]))) * 100, 1, 100)}%`,
+                }"
+                :layoutId="String(i.timestamp)"
+                v-for="i in speedChartList"
+                :key="i.timestamp"
+                :initial="{ x: 10, opacity: 0 }"
+                :animate="{ x: 0, opacity: 1 }"
+                :transition="{ duration: 1 }"
+            >
+            </motion.div>
+            <!-- <BarChart class="h-full" :data="data" index="time" :categories="['value']" :showTooltip="false"
+            :showLegend="false" :showXAxis="false" :showYAxis="false" :showGrid="false" :groupMaxWidth="10" /> -->
+        </div>
+    </div>
+</template>

front/components/Home/File/FileUploadProgressView/index.vue

@@ -1,20 +1,26 @@
 <script setup lang="ts">
-import { LucidePlay, LucideSettings, LucideSquare } from 'lucide-vue-next'
+import { LucideSquare, LucideInfo, LucideFolders, LucideArrowUpFromLine, LucideCircleX, LucideCheckCircle, LucideLoaderCircle } from 'lucide-vue-next'
 import Button from '@/components/ui/button/Button.vue'
-import FileUploadBlockProgressView from '@/components/FileUploadBlockProgressView.vue'
-import { motion } from 'motion-v'
+
 import getFileSize from '~/lib/getFileSize'
 import { cx } from 'class-variance-authority'
 import asyncWorker from '@/lib/asyncWorker'
 import calcFileHashWorker from '@/lib/calcFileHashWorker?worker'
-import { clamp, get, groupBy, isEmpty, isNumber, isString, sample, shuffle, times } from 'lodash-es'
+import { detectSupportedEngines } from '@/lib/calcFileHash'
+import { clamp, get, isEmpty, isNumber, sample, shuffle, throttle, times } from 'lodash-es'
 import { nanoid } from 'nanoid'
 import { toast } from 'vue-sonner'
 import dayjs from 'dayjs'
 import showDrawer from '~/lib/showDrawer'
+import FileUploadTotalSpeedView from './FileUploadTotalSpeedView.vue'
+import FileUploadTotalProgressControlView from './FileUploadTotalProgressControlView.vue'
 import FileUploadSpeedInfoView from './FileUploadSpeedInfoView.vue'
 import getFileChunk from '~/lib/getFileChunk'
 import type { FileHandleKey } from '~/components/Preprocessing/types'
+import asyncWait from '@/lib/asyncWait'
+import axios from 'axios'
+import type { SelectedFile, Uploadfile } from './types'
+import FileUploadDetailView from './FileUploadDetailView.vue'
 
 const props = defineProps<{
     data: { file: File[]; config: Record<string, any>; handle_type: FileHandleKey }
@@ -23,81 +29,17 @@ const emit = defineEmits<{
     (e: 'change', key: string): void
 }>()
 const form = useFormContext()
+const { t } = useI18n()
 
-const selectedFile = ref()
-const uploadfiles = ref<
-    {
-        fileId: string
-        id?: string // 后端文件id
-        file: File
-        status: 'start' | 'pause' | 'finish' | 'error'
-        hash?: string
-        procressType: 'hash' | 'create' | 'upload' | 'finish'
-        uploadInfo?: {
-            chunks: Record<number, { status: 'success' | 'error' | 'processing'; createdAt: number }>
-            chunkLength: number
-            ChunkSize: number
-        }
-        queue: {
-            taskId: string
-            taskType: 'hash' | 'create' | 'chunk' | 'upload' | 'finish'
-            queueType: 'sync' | 'async' // sync任务禁止并发
-            index?: number
-            retry?: number
-        }[]
-    }[]
->([])
-const selectedUploadfile = computed(() => uploadfiles.value.find((item) => item.fileId === selectedFile.value))
-const selectedUploadfileChunk = computed(() => Object.values(selectedUploadfile.value?.uploadInfo?.chunks || {}))
-const selectedUploadfileViewMode = ref<'progress' | 'heatmap'>('progress')
+const selectedFile = ref<SelectedFile>(null)
+const uploadfiles = ref<Uploadfile[]>([])
 
 const procressTaskList = ref<Map<string, any>>(new Map())
 const activeTaskList = computed(() => uploadfiles.value.filter((r) => r.queue.length > 0 && r.status === 'start'))
 const activeTaskAllQueue = computed(() => activeTaskList.value.flatMap((r) => r.queue))
 const batchNum = ref(3)
 
-const totalTaskStatus = computed(() => {
-    if (uploadfiles.value.some((r) => r.status === 'start')) {
-        return 'start'
-    }
-    if (uploadfiles.value.some((r) => r.status === 'pause')) {
-        return 'pause'
-    }
-    return 'disabled'
-})
-const totalUploadProgress = computed(() => {
-    const successCount = uploadfiles.value.reduce((acc, curr) => {
-        const { status, uploadInfo } = curr || {}
-        if (status === 'finish') return acc
-        const { chunks } = uploadInfo || {}
-        return acc + Object.entries(chunks || {}).filter(([index, chunk]) => chunk.status === 'success').length
-    }, 0)
-    const totalCount = uploadfiles.value.reduce((acc, curr) => {
-        const { status, uploadInfo } = curr || {}
-        if (status === 'finish') return acc
-        const { chunkLength } = uploadInfo || {}
-        return acc + (chunkLength || 0)
-    }, 0)
-    return ((successCount || 0) / (totalCount || 0)) * 100
-})
-
-const counter = useInterval(1000)
-const speedChartData = ref<Record<number, { createdAt: number; value: number }[]>>({})
-watch(counter, () => {
-    const speed = uploadfiles.value?.flatMap((item) => {
-        const { chunks, ChunkSize } = item?.uploadInfo || {}
-        return Object.entries(chunks || {})
-            .filter(([index, chunk]) => chunk.status === 'success' && dayjs().unix() - 60 < chunk.createdAt)
-            ?.map(([index, chunk]) => {
-                const { createdAt } = chunk || {}
-                return {
-                    createdAt,
-                    value: ChunkSize || 0,
-                }
-            })
-    })
-    speedChartData.value = groupBy(speed, 'createdAt')
-})
+const speedChartData = ref<Record<number, { fileId: string; index: number; value: number }[]>>({})
 
 onMounted(() => {
     props.data.file.forEach((file) => {
@@ -119,6 +61,7 @@ const { error, execute, isLoading } = useAsyncState(
     async () => {
         while (activeTaskAllQueue.value.length > 0) {
             const taskList = uploadfiles?.value?.filter((r) => r.queue.length > 0 && r.status === 'start')
+            await asyncWait(10) // 让出主线程，防止空转导致ui卡死
             await Promise.all(
                 times(batchNum.value, async (i: number) => {
                     const file = sample(taskList)
@@ -134,10 +77,10 @@ const { error, execute, isLoading } = useAsyncState(
 
                     if (queueType === 'async') {
                         if (!!retry && retry >= 3) {
-                            toast.error('上传错误', {
-                                description: `文件 ${file?.file?.name} 的${index}分块经过多次尝试依然上传失败, 我们已经终止该文件上传`,
+                            toast.error(t('page.progress.file.uploadError'), {
+                                description: t('page.progress.file.chunkUploadFailed', [file?.file?.name, index]),
                             })
-                            uploadfiles.value[uploadFileIndex].status = 'error'
+                            uploadfiles.value[uploadFileIndex]!.status = 'error'
                             return
                         }
                         uploadfiles.value[uploadFileIndex]?.queue.shift()
@@ -168,14 +111,14 @@ const { error, execute, isLoading } = useAsyncState(
                         // todo 重新加入队列
                         if (queueType === 'async') {
                             uploadfiles.value[uploadFileIndex]?.queue.push({ ...task, retry: (task?.retry || 0) + 1 })
-                            toast.warning('上传错误', {
-                                description: `文件 ${file?.file?.name} 的${index}分块上传失败, 我们将在稍后再次尝试上传`,
+                            toast.warning(t('page.progress.file.uploadError'), {
+                                description: t('page.progress.file.chunkUploadRetry', [file?.file?.name, index]),
                             })
                         }
                         if (queueType === 'sync') {
-                            uploadfiles.value[uploadFileIndex].status = 'error'
-                            toast.error('上传错误', {
-                                description: `文件${file?.file?.name}上传失败, 请重试`,
+                            uploadfiles.value[uploadFileIndex]!.status = 'error'
+                            toast.error(t('page.progress.file.uploadError'), {
+                                description: t('page.progress.file.fileUploadFailed', [file?.file?.name]),
                             })
                         }
                     } finally {
@@ -195,11 +138,20 @@ watchEffect(async () => {
     }
 })
 
+const LARGE_FILE_THRESHOLD = 500 * 1024 * 1024 // 500 MB
+
 const handleHash = async (fileId: string) => {
     const uploadfile = uploadfiles.value.find((item) => item.fileId === fileId)
     if (!uploadfile?.file) return
     uploadfile.procressType = 'hash'
-    const res = await asyncWorker(calcFileHashWorker, { data: { file: uploadfile.file } })
+    const supportedEngines = detectSupportedEngines()
+    if (supportedEngines.length === 0) {
+        throw new Error(t('page.progress.file.hashEngineNotFound'))
+    }
+    const preferredEngine = uploadfile.file.size >= LARGE_FILE_THRESHOLD ? 'wasm' : 'native'
+    const res = await asyncWorker(calcFileHashWorker, {
+        data: { file: uploadfile.file, engine: supportedEngines.includes(preferredEngine) ? preferredEngine : supportedEngines?.[0] },
+    })
     const { hash } = res?.data || {}
     uploadfile.hash = hash
 }
@@ -216,6 +168,7 @@ const handleCreate = async (fileId: string) => {
             id: string
             type: 'init' | 'already'
             chunk_size: number
+            chunks: number[]
         }
     }>('/api/file/create', {
         method: 'POST',
@@ -225,10 +178,10 @@ const handleCreate = async (fileId: string) => {
             hash,
         },
     })
-    const { id, chunk_size, type: createType } = createData?.data || {}
+    const { id, chunk_size, type: createType, chunks = [] } = createData?.data || {}
     uploadfile.id = id
     uploadfile.uploadInfo = {
-        chunks: {},
+        chunks: Object.fromEntries(chunks.map((index: number) => [index - 1, { status: 'success', createdAt: dayjs().unix() }])),
         chunkLength: Math.ceil(size / chunk_size),
         ChunkSize: chunk_size,
     }
@@ -275,17 +228,18 @@ const handleUpload = async (fileId: string, index: number) => {
     formData.append('file', new Blob([chunk]))
     formData.append('index', (index + 1).toString())
     formData.append('id', id)
-    const res = await $fetch<{
-        code: number
-    }>('/api/file/slice', {
-        method: 'POST',
-        body: formData,
+    const { data: res } = await axios.post('/api/file/slice', formData, {
+        onUploadProgress: throttle((progressEvent) => {
+            const { rate } = progressEvent || {}
+            const timestamp = dayjs().unix()
+            speedChartData.value[timestamp] = [...(speedChartData.value[timestamp] || []), { fileId, index, value: rate || 0 }]
+        }, 1000),
     })
     const { code } = res || {}
     if (code !== 200) {
-        throw new Error('上传失败')
+        throw new Error(t('page.progress.file.uploadFailed'))
     }
-    uploadfile.uploadInfo!.chunks[index].status = 'success'
+    uploadfile.uploadInfo!.chunks![index]!.status = 'success'
     if (Object.entries(uploadfile.uploadInfo!.chunks || {}).filter(([index, chunk]) => chunk.status === 'success').length === chunkLength) {
         uploadfile.queue.push({ taskType: 'finish', queueType: 'sync', taskId: nanoid() })
     }
@@ -305,7 +259,7 @@ const handleFinish = async (fileId: string) => {
         },
     })
     if (res?.code !== 200) {
-        throw new Error('上传失败')
+        throw new Error(t('page.progress.file.uploadFailed'))
     }
     uploadfile.status = 'finish'
 }
@@ -339,102 +293,29 @@ const handleShowSpeedInfo = () => {
 </script>
 
 <template>
-    <div class="grid grid-cols-4 gap-5">
-        <div class="rounded-xl p-3 bg-white/80 flex flex-col gap-2 col-span-4 md:col-span-3 h-32 md:h-auto">
-            <div class="flex flex-col gap-1">
-                <div @click="handleShowSpeedInfo" class="flex flex-row gap-1 items-center text-xs opacity-70">
-                    总上传进度
-                    <LucideInfo class="size-3" />
-                </div>
-                <div class="text-2xl font-bold">
-                    {{
-                        `${
-                            getFileSize(
-                                Object.entries(speedChartData)
-                                    ?.filter((r) => dayjs().unix() - 60 < parseInt(r[0]))
-                                    ?.reduce((acc, curr) => acc + curr[1]?.reduce((_acc, _curr) => _acc + _curr.value, 0), 0) / 60
-                            ) ?? 0
-                        }/s`
-                    }}
-                </div>
-            </div>
-            <div class="flex-1 relative overflow-hidden flex flex-row gap-0.5 justify-end items-end">
-                <motion.div
-                    class="w-2 shrink-0 bg-primary relative"
-                    :style="{
-                        height: `${(i[1]?.reduce((acc, curr) => acc + curr.value, 0) / Math.max(...Object.entries(speedChartData)?.map((r) => r[1]?.reduce((acc, curr) => acc + curr.value, 0)))) * 100}%`,
-                    }"
-                    :layoutId="i[0]"
-                    v-for="i in Object.entries(speedChartData)"
-                    :key="i[0]"
-                    :initial="{ x: 10, opacity: 0 }"
-                    :animate="{ x: 0, opacity: 1 }"
-                    :transition="{ duration: 1 }"
-                >
-                </motion.div>
-                <!-- <BarChart class="h-full" :data="data" index="time" :categories="['value']" :showTooltip="false"
-            :showLegend="false" :showXAxis="false" :showYAxis="false" :showGrid="false" :groupMaxWidth="10" /> -->
-            </div>
-        </div>
-        <div class="rounded-xl col-span-4 md:col-span-1 bg-white/80 h-32 md:h-auto md:aspect-square flex flex-col gap-2 relative overflow-hidden">
-            <div class="absolute top-0 left-0 w-full h-full z-[0] flex flex-col justify-end">
-                <div class="w-full bg-green-100 border-t border-green-500" :style="`height: ${totalUploadProgress || 0}%`"></div>
-            </div>
-            <div class="flex flex-col gap-2 justify-between p-3 h-full relative z-[1]">
-                <div class="flex flex-col gap-1">
-                    <div class="text-xs opacity-70">总上传进度</div>
-                    <div class="text-4xl font-bold">{{ (totalUploadProgress || 0).toFixed(1) }}%</div>
-                </div>
-                <div class="flex flex-row gap-2">
-                    <Button
-                        class="aspect-square hover:text-white p-0 bg-green-200 hover:bg-green-300 text-green-500"
-                        :disabled="['start', 'disabled'].includes(totalTaskStatus)"
-                        @click="
-                            () => {
-                                uploadfiles.forEach((r) => {
-                                    r.status = 'start'
-                                })
-                            }
-                        "
-                    >
-                        <LucidePlay class="size-1/2" />
-                    </Button>
-                    <Button
-                        class="aspect-square hover:text-white p-0 bg-orange-200 hover:bg-orange-300 text-orange-500"
-                        :disabled="['pause', 'disabled'].includes(totalTaskStatus)"
-                        @click="
-                            () => {
-                                uploadfiles.forEach((r) => {
-                                    r.status = 'pause'
-                                })
-                            }
-                        "
-                    >
-                        <LucideSquare class="size-1/2" />
-                    </Button>
-                    <!-- <Button class="aspect-square bg-blue-200 hover:bg-blue-300 text-blue-500 hover:text-white p-0">
-                        <LucideSettings class="size-1/2" />
-                    </Button> -->
-                </div>
-            </div>
-        </div>
+    <BaseCard class="grid grid-cols-4 gap-5">
+        <FileUploadTotalSpeedView :speedChartData="speedChartData" />
+        <FileUploadTotalProgressControlView :uploadfiles="uploadfiles" />
         <div class="col-span-4 flex flex-col bg-white/80 rounded-xl p-3 text-md gap-5">
-            <div>文件列表</div>
+            <div class="flex flex-row gap-2 items-center">
+                <LucideFolders class="size-4" />
+                {{ t('page.progress.file.fileList') }}
+            </div>
             <div class="flex flex-col -mx-3 text-sm">
                 <div class="grid grid-cols-[2fr_6rem_6rem] md:grid-cols-[2fr_6rem_6rem_4fr] gap-2 border-b border-black/20 pb-2 px-3">
-                    <div>文件名</div>
-                    <div>文件大小</div>
+                    <div>{{ t('page.progress.file.fileName') }}</div>
+                    <div>{{ t('page.progress.file.fileSize') }}</div>
                     <div @click="handleShowSpeedInfo" class="flex flex-row gap-1 items-center">
-                        上传速度
+                        {{ t('page.progress.file.uploadSpeed') }}
                         <LucideInfo class="size-3" />
                     </div>
-                    <div class="hidden md:block">进度</div>
+                    <div class="hidden md:block">{{ t('page.progress.file.progress') }}</div>
                 </div>
                 <div
                     :class="
                         cx(
                             'grid grid-cols-[2fr_6rem_6rem] md:grid-cols-[2fr_6rem_6rem_4fr] gap-2 py-2 border-b border-black/20 items-center hover:bg-primary/30 px-3 cursor-pointer',
-                            selectedFile === item?.fileId && 'bg-primary text-white hover:!bg-primary'
+                            selectedFile === item?.fileId && 'bg-primary text-white hover:bg-primary!'
                         )
                     "
                     v-for="(item, index) in uploadfiles"
@@ -457,9 +338,9 @@ const handleShowSpeedInfo = () => {
                                 (e: Event) => {
                                     e.stopPropagation()
                                     if (item?.status === 'start') {
-                                        uploadfiles[index].status = 'pause'
+                                        uploadfiles[index]!.status = 'pause'
                                     } else {
-                                        uploadfiles[index].status = 'start'
+                                        uploadfiles[index]!.status = 'start'
                                     }
                                 }
                             "
@@ -473,26 +354,26 @@ const handleShowSpeedInfo = () => {
                     </div>
                     <div>{{ getFileSize(item?.file?.size) }}</div>
                     <div>
-                        {{
-                            `${getFileSize(
-                                (Object.entries(item?.uploadInfo?.chunks || {})?.filter(
-                                    ([, chunk]) => chunk.status === 'success' && dayjs().unix() - 60 < chunk.createdAt
-                                )?.length /
-                                    60) *
-                                    (item?.uploadInfo?.ChunkSize || 0)
-                            )} /s`
-                        }}
+                        <template v-if="item?.status === 'start' && item?.procressType === 'upload'">
+                            {{
+                                `${getFileSize(
+                                    Object.entries(speedChartData)
+                                        ?.filter(([key, value]) => value.some((r) => r.fileId === item?.fileId) && dayjs().unix() - 1 === Number(key))
+                                        ?.reduce((acc, curr) => acc + curr[1]?.reduce((acc, curr) => acc + curr.value, 0), 0) ?? 0
+                                )} /s`
+                            }}
+                        </template>
                     </div>
                     <div
                         class="flex flex-row gap-2 items-center col-span-3 md:col-span-1"
                         v-if="['hash', 'create', 'chunk']?.includes(item?.procressType)"
                     >
                         <LucideLoaderCircle class="size-4 animate-spin" />
-                        <div>正在{{ item?.procressType }}中...</div>
+                        <div>{{ t(`page.progress.file.processing.${item?.procressType}`) }}</div>
                     </div>
                     <div class="flex flex-row gap-2 items-center col-span-3 md:col-span-1" v-if="item?.procressType === 'finish'">
-                        {{ item?.status === 'finish' ? '云端已有相同hash文件, 秒传成功' : null }}
-                        {{ item?.status === 'error' ? '上传失败，请稍后重试' : null }}
+                        {{ item?.status === 'finish' ? t('page.progress.file.instantUploadSuccess') : null }}
+                        {{ item?.status === 'error' ? t('page.progress.file.uploadFailedRetry') : null }}
                     </div>
                     <div class="flex flex-row gap-2 items-center col-span-3 md:col-span-1" v-if="item?.procressType === 'upload'">
                         <div class="rounded-full bg-white/50 w-full h-2 overflow-hidden border border-white">
@@ -524,44 +405,6 @@ const handleShowSpeedInfo = () => {
                 </div>
             </div>
         </div>
-        <div class="col-span-4 flex flex-col bg-white/80 rounded-xl p-3 gap-5" v-if="selectedFile">
-            <div>上传详情</div>
-            <div class="grid grid-cols-3 text-sm gap-3">
-                <div>
-                    区块： {{ selectedUploadfile?.uploadInfo?.chunkLength }} x {{ getFileSize(selectedUploadfile?.uploadInfo?.ChunkSize as number) }}
-                </div>
-                <div class="truncate col-span-2">hash: {{ selectedUploadfile?.hash }}</div>
-                <div>已完成: {{ selectedUploadfileChunk?.filter((r) => r.status === 'success')?.length || 0 }}</div>
-                <div>已丢弃: {{ selectedUploadfileChunk?.filter((r) => r.status === 'error')?.length || 0 }}</div>
-                <div>
-                    待完成:
-                    {{ (selectedUploadfile?.uploadInfo?.chunkLength || 0) - (selectedUploadfileChunk?.length || 0) }}
-                </div>
-                <div class="col-span-3 flex flex-row justify-between items-center">
-                    <div class="text-md font-bold">{{ selectedUploadfileViewMode === 'progress' ? '区块进度条' : '区块热力图' }}</div>
-                    <Button
-                        size="sm"
-                        class="ml-auto text-xs"
-                        @click="selectedUploadfileViewMode = selectedUploadfileViewMode === 'progress' ? 'heatmap' : 'progress'"
-                    >
-                        <LucideArrowDownUp class="size-4" />
-                        {{ selectedUploadfileViewMode === 'progress' ? '热力图' : '进度条' }}
-                    </Button>
-                </div>
-                <div class="h-7 col-span-3 flex flex-row gap-2 items-center" v-if="selectedUploadfileViewMode === 'progress'">
-                    <div class="flex-1 h-full">
-                        <FileUploadBlockProgressView :data="selectedUploadfile?.uploadInfo" />
-                    </div>
-                    {{
-                        clamp(((selectedUploadfileChunk?.length || 0) / (selectedUploadfile?.uploadInfo?.chunkLength || 0)) * 100, 0, 100)?.toFixed(
-                            2
-                        )
-                    }}%
-                </div>
-                <div v-if="selectedUploadfileViewMode === 'heatmap'" class="col-span-3 bg-black/5 rounded p-2">
-                    <FileUploadHeatMapView :size="12" :data="selectedUploadfile?.uploadInfo" />
-                </div>
-            </div>
-        </div>
-    </div>
+        <FileUploadDetailView :uploadfiles="uploadfiles" :selectedFile="selectedFile" />
+    </BaseCard>
 </template>