mirror of
https://github.com/CopterExpress/clover.git
synced 2026-05-27 13:39:33 +00:00
55 lines
2.0 KiB
Markdown
55 lines
2.0 KiB
Markdown
# Connecting Raspberry Pi to the flight controller
|
|
|
|
In order to program [autonomous flights](simple_offboard.md), [work with Pixhawk or Pixracer over Wi-Fi](gcs_bridge.md), use [controller app](rc.md) and access other functions you need to connect your Raspberry Pi to the flight controller.
|
|
|
|
## USB connection
|
|
|
|
USB connection is the preferred way to connect to the flight controller.
|
|
|
|
1. Connect your FCU to the Raspberry Pi using a microUSB to USB cable.
|
|
2. [Connect to the Raspberry Pi over SSH](ssh.md).
|
|
3. Make sure the connection is working by [running the following command on the Raspberry Pi](ssh.md):
|
|
|
|
```bash
|
|
rostopic echo /mavros/state
|
|
```
|
|
|
|
The `connected` field should have the `True` value.s
|
|
|
|
> **Hint** You need to set the `CBRK_USB_CHK` [parameter](parameters.md) to 197848 for the USB connection to work.
|
|
|
|
## UART connection
|
|
|
|
> **Note** In the image version **0.20** `clever` package and service was renamed to `clover`. See [previous version of the article](https://github.com/CopterExpress/clover/blob/v0.19/docs/en/connection.md) for older images.
|
|
|
|
<!-- TODO: Connection scheme -->
|
|
|
|
UART connection is another way for the Raspberry Pi and FCU to communicate.
|
|
|
|
1. Connect Raspberry Pi to your FCU using a UART cable.
|
|
2. [Connect to the Raspberry Pi over SSH](ssh.md).
|
|
3. Change the connection type in `~/catkin_ws/src/clover/clover/launch/clover.launch` to UART:
|
|
|
|
```xml
|
|
<arg name="fcu_conn" default="uart"/>
|
|
```
|
|
|
|
Be sure to restart the `clover` service after editing the .launch file:
|
|
|
|
```bash
|
|
sudo systemctl restart clover
|
|
```
|
|
|
|
> **Hint** Set the `SYS_COMPANION` PX4 parameter to 921600 to enable UART on the FCU.
|
|
|
|
## SITL connection
|
|
|
|
In order to connect to a local or a remote [SITL](sitl.md) instance set the `fcu_conn` parameter to `udp` and `fcu_ip` to the IP address of the SITL instance (`127.0.0.1` if you are running the instance locally):
|
|
|
|
```xml
|
|
<arg name="fcu_conn" default="udp"/>
|
|
<arg name="fcu_ip" default="127.0.0.1"/>
|
|
```
|
|
|
|
**Next**: [Using QGroundControl over Wi-Fi](gcs_bridge.md)
|