image: enable USB in Compute Module 4

image: build rtl8812au wi-fi driver
2026-06-01 07:29:32 +00:00 · 2021-04-02 10:35:49 +03:00 · 2021-04-02 02:31:34 +03:00
276 changed files with 128568 additions and 3759 deletions
--- a/.github/workflows/build-image.yaml
+++ b/.github/workflows/build-image.yaml
@@ -1,29 +0,0 @@
-name: RPi image
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ master ]
-  release:
-    types: [ created ]
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: Build image
-        run: |
-          docker run --privileged --rm -v /dev:/dev -v $(pwd):/builder/repo -e TRAVIS_TAG="${{ github.event.release.tag_name }}" sfalexrog/img-tool:qemu-update
-      - name: Compress image
-        run: |
-          cd images && sudo chmod -R 777 . && zip -9 $(echo clover_*).zip clover_* && ls -l . && unzip -l clover_*.zip
-      - name: Upload image
-        uses: softprops/action-gh-release@v1
-        if: ${{ github.event_name == 'release' }}
-        with:
-          files: images/clover_*.zip
-          prerelease: true
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -1,23 +0,0 @@
-name: Build
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ master ]
-
-jobs:
-  melodic:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: Native Melodic build
-        run: |
-          docker run --rm -v $(pwd):/root/catkin_ws/src/clover ros:melodic-ros-base /root/catkin_ws/src/clover/builder/standalone-install.sh
-  noetic:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: Native Noetic build
-        run: |
-          docker run --rm -v $(pwd):/root/catkin_ws/src/clover ros:noetic-ros-base /root/catkin_ws/src/clover/builder/standalone-install.sh
--- a/.github/workflows/docs.yml
+++ b/.github/workflows/docs.yml
@@ -1,53 +0,0 @@
-name: Documentation
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ master ]
-
-jobs:
-  docs:
-    runs-on: ubuntu-18.04
-    steps:
-      - uses: actions/checkout@v2
-      - name: Use Node.js
-        uses: actions/setup-node@v1
-        with: { node-version: '10' }
-      - name: Setup tools
-        run: |
-          sudo sh -c "echo ttf-mscorefonts-installer msttcorefonts/accepted-mscorefonts-eula select true | debconf-set-selections"
-          sudo apt-get update && sudo apt-get install -y calibre msttcorefonts
-          builder/assets/install_gitbook.sh
-          npm install markdownlint-cli -g
-          npm install svgexport -g
-          gitbook -V
-          markdownlint -V
-      - name: Run markdownlint
-        run: markdownlint docs
-      - name: Check Assets
-        run: |
-          ./check_assets_size.py
-          ./check_unused_assets.py
-      - name: Build GitBook
-        run: |
-         gitbook install
-         gitbook build
-      - name: Generate PDF
-        if: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' }}
-        run: |
-          for i in 1 2 3 4; do gitbook pdf ./ _book/clover.pdf && break || sleep 1; done
-          sudo apt-get -q install ghostscript
-          gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/default -dNOPAUSE -dQUIET -dBATCH -dDetectDuplicateImages -dCompressFonts=true -r150 -sOutputFile=_book/clover_ru_compressed.pdf _book/clover_ru.pdf
-          gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/default -dNOPAUSE -dQUIET -dBATCH -dDetectDuplicateImages -dCompressFonts=true -r150 -sOutputFile=_book/clover_en_compressed.pdf _book/clover_en.pdf
-          rm _book/clover_ru.pdf && mv _book/clover_ru_compressed.pdf _book/clover_ru.pdf
-          rm _book/clover_en.pdf && mv _book/clover_en_compressed.pdf _book/clover_en.pdf
-          ls -lah _book/clover*.pdf
-      - name: Deploy
-        uses: JamesIves/github-pages-deploy-action@4.1.3
-        if: ${{ github.event_name == 'push' && github.ref == 'refs/heads/master' }}
-        with:
-          branch: gh-pages
-          folder: _book
-          clean: true
-          single-commit: true # to avoid multiple copies of large pdf files
--- a/.github/workflows/editorconfig.yaml
+++ b/.github/workflows/editorconfig.yaml
@@ -1,18 +0,0 @@
-name: Editorconfig
-
-on:
-  push:
-    branches: [ '*' ]
-  pull_request:
-    branches: [ master ]
-
-jobs:
-  editorconfig:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - name: .editorconfig Linter
-        run: |
-          wget --no-verbose https://github.com/okalachev/editorconfig-checker/releases/download/1.2.1-disable-spaces-amount/ec-linux-amd64
-          chmod +x ec-linux-amd64
-          ./ec-linux-amd64 -spaces-after-tabs -e "roslib.js|ros3d.js|eventemitter2.js|json-to-pretty-yaml.js|draw.cpp|BinUtils.swift|\.idea|apps/android/app|blockly/|clover_blocks/programs/|highlight/|python.js|Assets.xcassets|test_parser_pass.txt|test_node_failure.txt|aruco_pose/vendor|\.stl|\.dxf|\.dae"
--- a/.gitignore
+++ b/.gitignore
@@ -6,4 +6,3 @@ _book/
 package-lock.json
 clover_blocks/programs/*.*
 !clover_blocks/programs/examples/*
-/.vscode/
--- a/.markdownlint.json
+++ b/.markdownlint.json
@@ -21,7 +21,6 @@
            "ROS",
            "ROS Kinetic",
            "ROS Melodic",
-            "ROS Noetic",
            "OpenCV",
            "OpenVPN",
            "Gazebo",
@@ -110,8 +109,7 @@
            "Li-ion",
            "Nvidia",
            "VirtualBox",
-            "VMware",
-            "DuoCam"
+            "VMware"
        ],
        "code_blocks": false
    },
--- a/.travis.yml
+++ b/.travis.yml
@@ -0,0 +1,123 @@
+os: linux
+dist: xenial
+language: generic
+services:
+  - docker
+env:
+  global:
+    - DOCKER="sfalexrog/img-tool:qemu-update"
+    - TARGET_REPO="https://github.com/${TRAVIS_REPO_SLUG}.git"
+    - IMAGE_VERSION=${TRAVIS_TAG:-${TRAVIS_COMMIT:0:7}}
+    - IMAGE_NAME="$(basename -s '.git' ${TARGET_REPO})_${IMAGE_VERSION}.img"
+git:
+  depth: 1
+jobs:
+  fast_finish: true
+  include:
+    - stage: Build
+      name: "Raspberry Pi Image Build"
+      cache:
+        directories:
+        - imgcache
+      before_script:
+        - docker pull ${DOCKER}
+# Check if there are any cached images, copy them to our "images" directory
+        - if [ -n "$(ls -A imgcache/*.zip)" ]; then mkdir -p images && cp imgcache/*.zip images; fi
+      script:
+        - if [[ -z ${TRAVIS_TAG} && "${TRAVIS_PULL_REQUEST}" != "false" ]]; then
+            echo "Commit range is ${TRAVIS_COMMIT_RANGE}" &&
+            if [ $(git diff --name-only ${TRAVIS_COMMIT_RANGE} | grep -v ^"docs/" | wc -l) -eq 0 ]; then
+              echo " === Docs-only change; skipping build ===" &&
+              export SKIP_BUILD=true;
+            fi;
+          fi
+        - if [ -z ${SKIP_BUILD} ]; then
+            docker run --privileged --rm -v /dev:/dev -v $(pwd):/builder/repo -e TRAVIS_TAG="${TRAVIS_TAG}" ${DOCKER};
+          fi
+      before_cache:
+        - cp images/*.zip imgcache
+      after_success:
+        - sudo chmod -R 777 *
+        - cd images && zip -9 ${IMAGE_NAME}.zip ${IMAGE_NAME} && stat --printf="Compressed image size:%s\n" ${IMAGE_NAME}.zip
+      before_deploy:
+        # Set up git user name and tag this commit
+        - git config --local user.name "goldarte"
+        - git config --local user.email "goldartt@gmail.com"
+      deploy:
+        provider: releases
+        token: ${GITHUB_OAUTH_TOKEN}
+        file: ${IMAGE_NAME}.zip
+        skip_cleanup: true
+        on:
+          tags: true
+        draft: true
+        name: ${TRAVIS_TAG}
+    - stage: Build
+      name: "Native Kinetic build"
+      env:
+        - NATIVE_DOCKER=ros:kinetic-ros-base
+      before_script:
+        - docker pull ${NATIVE_DOCKER}
+      script:
+        - docker run --rm -v $(pwd):/root/catkin_ws/src/clover ${NATIVE_DOCKER} /root/catkin_ws/src/clover/builder/standalone-install.sh
+    - stage: Build
+      name: "Native Melodic build"
+      env:
+        - NATIVE_DOCKER=ros:melodic-ros-base
+      before_script:
+        - docker pull ${NATIVE_DOCKER}
+      script:
+        - docker run --rm -v $(pwd):/root/catkin_ws/src/clover ${NATIVE_DOCKER} /root/catkin_ws/src/clover/builder/standalone-install.sh
+    - stage: Build
+      name: "Documentation"
+      language: node_js
+      node_js:
+        - "10"
+      before_script:
+        - sudo sh -c "echo ttf-mscorefonts-installer msttcorefonts/accepted-mscorefonts-eula select true | debconf-set-selections"
+        - sudo apt update && sudo apt install -y calibre msttcorefonts
+        - npm install gitbook-cli -g
+        - npm install markdownlint-cli -g
+        - npm install svgexport -g
+        - gitbook -V
+        - markdownlint -V
+      script:
+        - markdownlint docs
+        - ./check_assets_size.py
+        - ./check_unused_assets.py
+        - gitbook install
+        - gitbook build
+        - for i in 1 2 3 4; do gitbook pdf ./ _book/clover.pdf && break || sleep 1; done
+        - sudo apt-get install ghostscript
+        - gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/default -dNOPAUSE -dQUIET -dBATCH -dDetectDuplicateImages -dCompressFonts=true -r150 -sOutputFile=_book/clover_ru_compressed.pdf _book/clover_ru.pdf
+        - gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/default -dNOPAUSE -dQUIET -dBATCH -dDetectDuplicateImages -dCompressFonts=true -r150 -sOutputFile=_book/clover_en_compressed.pdf _book/clover_en.pdf
+        - rm _book/clover_ru.pdf && mv _book/clover_ru_compressed.pdf _book/clover_ru.pdf
+        - rm _book/clover_en.pdf && mv _book/clover_en_compressed.pdf _book/clover_en.pdf
+        - ls -lah _book/clover*.pdf
+      deploy:
+        provider: pages
+        local_dir: _book
+        skip_cleanup: true
+        token: ${GITHUB_OAUTH_TOKEN}
+        keep_history: true
+        target_branch: master
+        repo: CopterExpress/clover.coex.tech
+        fqdn: clover.coex.tech
+        verbose: true
+        on:
+          branch: master
+    - stage: Build
+      name: Editorconfig-lint
+      language: generic
+      before_script:
+        - wget https://github.com/okalachev/editorconfig-checker/releases/download/1.2.1-disable-spaces-amount/ec-linux-amd64
+        - chmod +x ec-linux-amd64
+      script:
+        - ./ec-linux-amd64 -spaces-after-tabs -e "roslib.js|ros3d.js|eventemitter2.js|draw.cpp|BinUtils.swift|\.idea|apps/android/app|blockly/|clover_blocks/programs/|highlight/|python.js|Assets.xcassets|test_parser_pass.txt|test_node_failure.txt|aruco_pose/vendor|\.stl|\.dxf|\.dae"
+stages:
+  - Build
+# More info there
+# https://github.com/travis-ci/travis-ci/issues/6893
+# https://docs.travis-ci.com/user/customizing-the-build/
+# https://docs.travis-ci.com/user/deployment/releases
+# https://docs.travis-ci.com/user/environment-variables/
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # clover🍀: create autonomous drones easily

-<img src="docs/assets/clover42-main-margin.png" align="right" width="400px" alt="COEX Clover Drone">
+<img src="docs/assets/clover42-main.png" align="right" width="400px" alt="COEX Clover Drone">

 Clover is an open source [ROS](https://www.ros.org)-based framework, providing user-friendly tools to control [PX4](https://px4.io)-powered drones. Clover is available as a ROS package, but is shipped mainly as a preconfigured image for Raspberry Pi. Once you've installed Raspberry Pi on your drone and flashed the image to its microSD card, taking the drone up in the air is a matter of minutes.

@@ -20,13 +20,12 @@ Clover drone is used on a wide range of educational events, including [Copter Ha

 Preconfigured image for Raspberry Pi with installed and configured software, ready to fly, is available [in the Releases section](https://github.com/CopterExpress/clover/releases).

-![GitHub Workflow Status](https://img.shields.io/github/workflow/status/CopterExpress/clover/CI)
-![GitHub all releases](https://img.shields.io/github/downloads/CopterExpress/clover/total)
+[![Build Status](https://travis-ci.org/CopterExpress/clover.svg?branch=master)](https://travis-ci.org/CopterExpress/clover)

 Image features:

 * Raspbian Buster
-* [ROS Noetic](http://wiki.ros.org/noetic)
+* [ROS Melodic](http://wiki.ros.org/melodic)
 * Configured networking
 * OpenCV
 * [`mavros`](http://wiki.ros.org/mavros)
@@ -38,10 +37,6 @@ API description for autonomous flights is available [on GitBook](https://clover.

 For manual package installation and running see [`clover` package documentation](clover/README.md).

-## Support
-
-[![Telegram Support Chat](https://img.shields.io/endpoint?label=Support%20Chat&url=https%3A%2F%2Ftelegram-badge-4mbpu8e0fit4.runkit.sh%2F%3Furl%3Dhttps%3A%2F%2Ft.me%2FCOEXHelpDesk)](https://t.me/COEXHelpdesk)
-
 ## License

 While the Clover platform source code is available under the MIT License, note, that the [documentation](docs/) is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
--- a/apps/ios/cleverrc/README.md
+++ b/apps/ios/cleverrc/README.md
@@ -1,4 +1,5 @@
-# iOS-приложение для управления Клевером
+iOS-приложение для управления Клевером
+--------------------------------------

 Для установки зависимостей необходим [CocoaPods](https://cocoapods.org):

--- a/aruco_pose/CMakeLists.txt
+++ b/aruco_pose/CMakeLists.txt
@@ -22,21 +22,13 @@ find_package(catkin REQUIRED COMPONENTS
  dynamic_reconfigure
 )

-# Workaround for OpenCV 3/4 support
-set(_opencv_version 4)
-find_package(OpenCV ${_opencv_version} QUIET COMPONENTS core imgproc calib3d)
-if (NOT OpenCV_FOUND)
-  message(STATUS "Did not find OpenCV 4, searching for OpenCV 3")
-  set(_opencv_version 3)
-endif()
-
-find_package(OpenCV ${_opencv_version} REQUIRED COMPONENTS core imgproc calib3d)
+find_package(OpenCV 3 REQUIRED COMPONENTS core imgproc calib3d)
 if ("${OpenCV_VERSION_MINOR}" LESS "9")
  message(STATUS "OpenCV version too low, using vendored ArUco package")
  include(vendor/VendorOpenCV.cmake)
 else()
  message(STATUS "Using system OpenCV ArUco package")
-  find_package(OpenCV ${_opencv_version} REQUIRED COMPONENTS aruco)
+  find_package(OpenCV 3 REQUIRED COMPONENTS aruco)
 endif()
 message(STATUS "OpenCV include dirs: ${OpenCV_INCLUDE_DIRS}")
 message(STATUS "OpenCV libraries: ${OpenCV_LIBRARIES}")
@@ -119,7 +111,7 @@ generate_messages(

 ## Generate dynamic reconfigure parameters in the 'cfg' folder
 generate_dynamic_reconfigure_options(
-  cfg/Detector.cfg
+  cfg/DetectorParams.cfg
 )

 ###################################
@@ -180,13 +172,6 @@ target_link_libraries(aruco_pose
  ${OpenCV_LIBRARIES}
 )

-# Prevent aruco_pose from having undefined symbols
-set_property(TARGET aruco_pose
-  APPEND
-  PROPERTY LINK_FLAGS
-  -Wl,--no-undefined
-)
-
 #############
 ## Install ##
 #############
@@ -202,11 +187,11 @@ set_property(TARGET aruco_pose
 # )

 ## Mark executables and/or libraries for installation
-install(TARGETS ${PROJECT_NAME}
-  ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
-  LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
-  RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
-)
+# install(TARGETS ${PROJECT_NAME} ${PROJECT_NAME}_node
+#   ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )

 ## Mark cpp header files for installation
 # install(DIRECTORY include/${PROJECT_NAME}/
@@ -222,14 +207,6 @@ install(TARGETS ${PROJECT_NAME}
 #   DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
 # )

-catkin_install_python(PROGRAMS src/genmap.py
-  DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
-)
-
-install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
-install(DIRECTORY map DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
 #############
 ## Testing ##
 #############
--- a/aruco_pose/README.md
+++ b/aruco_pose/README.md
@@ -70,7 +70,7 @@ It's recommended to run it within the same nodelet manager with the camera nodel

 * `~map` – path to text file with markers list
 * `~frame_id` – published frame id (default: `aruco_map`)
-* `~known_tilt` – known tilt (pitch and roll) of markers map as a frame
+* `~known_tilt` – debug image width
 * `~image_width` – debug image width (default: 2000)
 * `~image_height` – debug image height (default: 2000)
 * `~image_margin` – debug image margin (default: 200)
--- a/aruco_pose/cfg/DetectorParams.cfg
+++ b/aruco_pose/cfg/DetectorParams.cfg
--- a/aruco_pose/src/aruco_detect.cpp
+++ b/aruco_pose/src/aruco_detect.cpp
@@ -111,14 +111,17 @@ public:
 		image_transport::ImageTransport it(nh_);
 		image_transport::ImageTransport it_priv(nh_priv_);

-		dyn_srv_ = std::make_shared<dynamic_reconfigure::Server<aruco_pose::DetectorConfig>>(nh_priv_);
-		dyn_srv_->setCallback(std::bind(&ArucoDetect::paramCallback, this, std::placeholders::_1, std::placeholders::_2));
-
+		map_markers_sub_ = nh_.subscribe("map_markers", 1, &ArucoDetect::mapMarkersCallback, this);
 		debug_pub_ = it_priv.advertise("debug", 1);
 		markers_pub_ = nh_priv_.advertise<aruco_pose::MarkerArray>("markers", 1);
 		vis_markers_pub_ = nh_priv_.advertise<visualization_msgs::MarkerArray>("visualization", 1);
 		img_sub_ = it.subscribeCamera("image_raw", 1, &ArucoDetect::imageCallback, this);
-		map_markers_sub_ = nh_.subscribe("map_markers", 1, &ArucoDetect::mapMarkersCallback, this);
+
+		dyn_srv_ = std::make_shared<dynamic_reconfigure::Server<aruco_pose::DetectorConfig>>(nh_priv_);
+		dynamic_reconfigure::Server<aruco_pose::DetectorConfig>::CallbackType cb;
+
+		cb = std::bind(&ArucoDetect::paramCallback, this, std::placeholders::_1, std::placeholders::_2);
+		dyn_srv_->setCallback(cb);

 		NODELET_INFO("ready");
 	}
--- a/aruco_pose/src/aruco_map.cpp
+++ b/aruco_pose/src/aruco_map.cpp
@@ -124,11 +124,6 @@ public:
 		vis_markers_pub_ = nh_priv_.advertise<visualization_msgs::MarkerArray>("visualization", 1, true);
 		debug_pub_ = it_priv.advertise("debug", 1);

-		publishMarkersFrames();
-		publishMarkers();
-		publishMapImage();
-		vis_markers_pub_.publish(vis_array_);
-
 		image_sub_.subscribe(nh_, "image_raw", 1);
 		info_sub_.subscribe(nh_, "camera_info", 1);
 		markers_sub_.subscribe(nh_, "markers", 1);
@@ -136,6 +131,11 @@ public:
 		sync_.reset(new message_filters::Synchronizer<SyncPolicy>(SyncPolicy(10), image_sub_, info_sub_, markers_sub_));
 		sync_->registerCallback(boost::bind(&ArucoMap::callback, this, _1, _2, _3));

+		publishMarkersFrames();
+		publishMarkers();
+		publishMapImage();
+		vis_markers_pub_.publish(vis_array_);
+
 		NODELET_INFO("ready");
 	}

--- a/aruco_pose/src/draw.cpp
+++ b/aruco_pose/src/draw.cpp
@@ -3,11 +3,26 @@

 #include "draw.h"
 #include <math.h>
-#include <vector>

 using namespace cv;
 using namespace cv::aruco;

+static void _cvProjectPoints2( const CvMat* object_points, const CvMat* rotation_vector,
+                       const CvMat* translation_vector, const CvMat* camera_matrix,
+                       const CvMat* distortion_coeffs, CvMat* image_points,
+                       CvMat* dpdrot CV_DEFAULT(NULL), CvMat* dpdt CV_DEFAULT(NULL),
+                       CvMat* dpdf CV_DEFAULT(NULL), CvMat* dpdc CV_DEFAULT(NULL),
+                       CvMat* dpddist CV_DEFAULT(NULL),
+                       double aspect_ratio CV_DEFAULT(0));
+
+static void _projectPoints( InputArray objectPoints,
+                    InputArray rvec, InputArray tvec,
+                    InputArray cameraMatrix, InputArray distCoeffs,
+                    OutputArray imagePoints,
+                    OutputArray jacobian = noArray(),
+                    double aspectRatio = 0 );
+
+
 void _drawPlanarBoard(Board *_board, Size outSize, OutputArray _img, int marginSize,
                      int borderBits, bool drawAxis) {

@@ -127,194 +142,35 @@ void _drawPlanarBoard(Board *_board, Size outSize, OutputArray _img, int marginS
 	}
 }

-/**
- * @brief Convert point coordinates from world space to camera space.
- *
- * @param points A vector of points in world space.
- * @param rvec Rotation matrix or Rodrigues rotation vector.
- * @param tvec Translation vector from world to camera space.
- *
- * @return A vector of points in camera space.
- */
-template<typename CvPointType>
-static std::vector<CvPointType> worldToCamera(const std::vector<CvPointType>& points,
-                                              const cv::Mat& rvec, const cv::Mat& tvec)
+/* Draw a (potentially partially visible) line. */
+static void linePartial(InputOutputArray image, Point3f p1, Point3f p2, const Scalar& color,
+                        int thickness = 1, int lineType = LINE_8, int shift = 0)
 {
-	// We operate with CV_64F matrices internally to avoid precision loss
-	cv::Mat rvec_64f;
-	cv::Mat tvec_64f;
-	rvec.convertTo(rvec_64f, CV_64F);
-	tvec.convertTo(tvec_64f, CV_64F);
-
-	// Convert Rodrigues vector to rotation matrix
-	cv::Mat rmat;
-	if ((rvec_64f.cols == 3 && rvec_64f.rows == 1) ||
-	    (rvec_64f.cols == 1 && rvec_64f.rows == 3))
-	{
-		Rodrigues(rvec_64f, rmat);
+	// If both points are behind the screen, don't draw anything
+	if (p1.z <= 0 && p2.z <= 0) {
+		return;
 	}
-	else
-	{
-		rmat = rvec_64f.clone();
+	Point2f p1p{p1.x, p1.y};
+	Point2f p2p{p2.x, p2.y};
+	// If points are on the different sides of the plane, compute intersection point
+	if (p1.z * p2.z < 0) {
+		// Compute intersection point with the screen
+		// We denote alpha as such:
+		// xi = (1 - alpha) * x1 + alpha * x2
+		// yi = (1 - alpha) * y1 + alpha * y2
+		// zi = (1 - alpha) * z1 + alpha * z2 = 0
+		// Thus, alpha can be expressed as
+		// alpha = z1 / (z1 - z2)
+		float alpha = p1.z / (p1.z - p2.z);
+		Point2f pi{(1 - alpha) * p1.x + alpha * p2.x, (1 - alpha) * p1.y + alpha * p2.y};
+		// Now, if z1 is negative, we draw the line from (xi, yi) to (x2, y2), else we draw from (x1, y1) to (xi, yi)
+		if (p1.z < 0) {
+			p1p = pi;
+		} else {
+			p2p = pi;
+		}
 	}
-	// Make sure tvec has a size of (3, 1)
-	if (tvec_64f.rows == 1)
-	{
-		tvec_64f = tvec_64f.t();
-	}
-	std::vector<CvPointType> result;
-	result.reserve(points.size());
-	for(const auto& point : points)
-	{
-		// Calculate point coordinates in camera frame
-		// static_casts are here to silence potential narrowing conversion warnings
-		CvPointType camPoint{
-			static_cast<decltype(CvPointType::x)>(point.x * rmat.at<double>(0,0) + point.y * rmat.at<double>(0,1) + point.z * rmat.at<double>(0,2) + tvec_64f.at<double>(0)),
-			static_cast<decltype(CvPointType::y)>(point.x * rmat.at<double>(1,0) + point.y * rmat.at<double>(1,1) + point.z * rmat.at<double>(1,2) + tvec_64f.at<double>(1)),
-			static_cast<decltype(CvPointType::z)>(point.x * rmat.at<double>(2,0) + point.y * rmat.at<double>(2,1) + point.z * rmat.at<double>(2,2) + tvec_64f.at<double>(2))
-		};
-		result.push_back(camPoint);
-	}
-	return result;
-}
-
-/**
- * @brief Project points from camera space to screen space, applying distortion in the process.
- *
- * @param points A vector of points in camera space.
- * @param cameraMatrix OpenCV intrinsic camera matrix.
- * @param distCoeffs OpenCV distortion model coefficients.
- *
- * @return A vector of points in screen space.
- */
-template<typename CvPointType>
-static std::vector<CvPointType> cameraToScreen(const std::vector<CvPointType>& points,
-                                               const cv::Mat& cameraMatrix,
-                                               const cv::Mat& distCoeffs)
-{
-	// We operate with CV_64F matrices internally to avoid precision loss
-	cv::Mat cm_64f; // camera matrix, CV_64F
-	cv::Mat dc_64f; // distortion coefficients, CV_64F
-	cameraMatrix.convertTo(cm_64f, CV_64F);
-	distCoeffs.convertTo(dc_64f, CV_64F);
-
-	// Make sure distortion vector has a size of (N, 1)
-	if (dc_64f.rows == 1)
-	{
-		dc_64f = dc_64f.t();
-	}
-
-	// We will always use 12 distortion coefficients,
-	// and we can safely pad missing ones with zeroes
-	dc_64f.resize(12, 0.0);
-
-	std::vector<CvPointType> result;
-	result.reserve(points.size());
-
-	for(const auto& point : points)
-	{
-		// Apply perspective projection, preserving initial Z coordinate
-		// Always use double-precision
-		cv::Point3d camPoint{
-			point.x / point.z,
-			point.y / point.z,
-			point.z
-		};
-
-		// Apply distortion
-		// Note that we do not consider tilted sensor distortion
-		// r^2 - distance from the image center squared
-		double r2 = camPoint.x * camPoint.x + camPoint.y * camPoint.y;
-		// r^4 - same, but to the 4th power
-		double r4 = r2 * r2;
-		// r^6 - same, but to the 6th power
-		double r6 = r4 * r2;
-		// tg1 - first tangential shift factor (2 * x * y)
-		double tg1 = 2 * camPoint.x * camPoint.y;
-		// tg2 - second tangential shift factor (r^2 + 2 * x^2)
-		double tg2 = r2 + 2 * camPoint.x * camPoint.x;
-		// tg3 - third tangential shift factor (r^2 + 2 * y^2)
-		double tg3 = r2 + 2 * camPoint.y * camPoint.y;
-		// polynomial distortion factor (numerator)
-		double pndist = 1 + dc_64f.at<double>(0) * r2 + dc_64f.at<double>(1) * r4 + dc_64f.at<double>(4) * r6;
-		// polynomial distortion factror (denominator)
-		double pddist = 1.0 / (1 + dc_64f.at<double>(5) * r2 + dc_64f.at<double>(6) * r4 + dc_64f.at<double>(7) * r6);
-		// Distorted point coordinates (always double-precision)
-		cv::Point3d distortedPoint{
-			camPoint.x * pndist * pddist + dc_64f.at<double>(2) * tg1 + dc_64f.at<double>(3) * tg2 + dc_64f.at<double>(8) * r2 + dc_64f.at<double>(9) * r4,
-			camPoint.y * pndist * pddist + dc_64f.at<double>(2) * tg3 + dc_64f.at<double>(3) * tg1 + dc_64f.at<double>(10) * r2 + dc_64f.at<double>(11) * r4,
-			camPoint.z
-		};
-
-		// Convert to screen space
-		// We use static_cast here to silence potential warnings about narrowing conversions
-		// (we expect that to be the case)
-		CvPointType screenPoint{
-			static_cast<decltype(CvPointType::x)>(distortedPoint.x * cm_64f.at<double>(0, 0) + cm_64f.at<double>(0, 2)),
-			static_cast<decltype(CvPointType::y)>(distortedPoint.y * cm_64f.at<double>(1, 1) + cm_64f.at<double>(1, 2)),
-			static_cast<decltype(CvPointType::z)>(distortedPoint.z)
-		};
-
-		result.push_back(screenPoint);
-	}
-	return result;
-}
-
-/**
- * @brief Clip a line against a clip plane.
- *
- * This function "clips" a line (described by two points in *camera space*)
- * against a clip plane that is `clipPlaneDistance` meters away from the
- * camera focal point. If both points are further away from the focal point
- * than `clipPlaneDistance`, they will be returned unmodified. If one of the
- * points is behind the clipping plane, a point *on* the clipping plane will
- * be computed and returned as one of the points.
- *
- * If none of the points are visible, an empty vector will be returned.
- *
- * @param p1 First point on the line, in camera space.
- * @param p2 Second point on the line, in camera space.
- * @param clipPlaneDistance Distance from the focal point to the clipping plane.
- * @return A vector of zero or two points on the clipped line, in camera space.
- */
-static std::vector<Point3f> lineClip(Point3f p1, Point3f p2, float clipPlaneDistance = 0.1f)
-{
-	// We don't need to compute an intersection if both points are
-	// behind us
-	if (p1.z < clipPlaneDistance && p2.z < clipPlaneDistance)
-	{
-		return {};
-	}
-	// We don't need to compute an intersection if both points are
-	// in front of us
-	if (p1.z > clipPlaneDistance && p2.z > clipPlaneDistance)
-	{
-		return {p1, p2};
-	}
-	// We don't really want to compute an intersection if both Z coordinates
-	// are sufficiently close to each other
-	if (std::abs(p1.z - p2.z) < 0.0001) // The number here is chosen arbitrarily
-	{
-		return {p1, p2};
-	}
-	// We compute the intersection as such:
-	// zi = (1 - alpha) * p1.z + alpha * p2.z = clipPlaneDistance
-	// alpha = (p1.z - clipPlaneDistance) / (p1.z - p2.z)
-	double alpha = (p1.z - clipPlaneDistance) / (p1.z - p2.z);
-	Point3f clipPlanePoint{
-		static_cast<float>((1 - alpha) * p1.x + alpha * p2.x),
-		static_cast<float>((1 - alpha) * p1.y + alpha * p2.y),
-		clipPlaneDistance
-	};
-	if (p1.z < clipPlaneDistance)
-	{
-		return {clipPlanePoint, p2};
-	}
-	else
-	{
-		return {p1, clipPlanePoint};
-	}
-	// Unreachable?
+	line(image, p1p, p2p, color, thickness, lineType, shift);
 }

 void _drawAxis(InputOutputArray _image, InputArray _cameraMatrix, InputArray _distCoeffs,
@@ -330,23 +186,647 @@ void _drawAxis(InputOutputArray _image, InputArray _cameraMatrix, InputArray _di
 	axisPoints.push_back(Point3f(length, 0, 0));
 	axisPoints.push_back(Point3f(0, length, 0));
 	axisPoints.push_back(Point3f(0, 0, length));
-	auto camAxisPoints = worldToCamera(axisPoints, _rvec.getMat(), _tvec.getMat());
-	auto axisX = cameraToScreen(lineClip(camAxisPoints[0], camAxisPoints[1]), _cameraMatrix.getMat(), _distCoeffs.getMat());
-	auto axisY = cameraToScreen(lineClip(camAxisPoints[0], camAxisPoints[2]), _cameraMatrix.getMat(), _distCoeffs.getMat());
-	auto axisZ = cameraToScreen(lineClip(camAxisPoints[0], camAxisPoints[3]), _cameraMatrix.getMat(), _distCoeffs.getMat());
-	if (axisX.size() > 0)
-	{
-		line(_image, Point2f{axisX[0].x, axisX[0].y}, Point2f{axisX[1].x, axisX[1].y},
-			Scalar(0, 0, 255), 3);
-	}
-	if (axisY.size() > 0)
-	{
-		line(_image, Point2f{axisY[0].x, axisY[0].y}, Point2f{axisY[1].x, axisY[1].y},
-			Scalar(0, 255, 0), 3);
-	}
-	if (axisZ.size() > 0)
-	{
-		line(_image, Point2f{axisZ[0].x, axisZ[0].y}, Point2f{axisZ[1].x, axisZ[1].y},
-			Scalar(255, 0, 0), 3);
-	}
+	std::vector<Point3f> imagePointsZ;
+	_projectPoints(axisPoints, _rvec, _tvec, _cameraMatrix, _distCoeffs, imagePointsZ);
+
+	// draw axis lines
+	linePartial(_image, imagePointsZ[0], imagePointsZ[1], Scalar(0, 0, 255), 3);
+	linePartial(_image, imagePointsZ[0], imagePointsZ[2], Scalar(0, 255, 0), 3);
+	linePartial(_image, imagePointsZ[0], imagePointsZ[3], Scalar(255, 0, 0), 3);
+}
+
+static CvMat _cvMat(const cv::Mat& m)
+{
+	CvMat self;
+	CV_DbgAssert(m.dims <= 2);
+	self = cvMat(m.rows, m.dims == 1 ? 1 : m.cols, m.type(), m.data);
+	self.step = (int)m.step[0];
+	self.type = (self.type & ~cv::Mat::CONTINUOUS_FLAG) | (m.flags & cv::Mat::CONTINUOUS_FLAG);
+	return self;
+}
+
+static void _projectPoints( InputArray _opoints,
+                        InputArray _rvec,
+                        InputArray _tvec,
+                        InputArray _cameraMatrix,
+                        InputArray _distCoeffs,
+                        OutputArray _ipoints,
+                        OutputArray _jacobian,
+                        double aspectRatio )
+{
+	Mat opoints = _opoints.getMat();
+	int npoints = opoints.checkVector(3), depth = opoints.depth();
+	CV_Assert(npoints >= 0 && (depth == CV_32F || depth == CV_64F));
+
+	CvMat dpdrot, dpdt, dpdf, dpdc, dpddist;
+	CvMat *pdpdrot = 0, *pdpdt = 0, *pdpdf = 0, *pdpdc = 0, *pdpddist = 0;
+
+	CV_Assert(_ipoints.needed());
+
+	_ipoints.create(npoints, 1, CV_MAKETYPE(depth, 3), -1, true);
+	Mat imagePoints = _ipoints.getMat();
+	CvMat c_imagePoints = _cvMat(imagePoints);
+	CvMat c_objectPoints = _cvMat(opoints);
+	Mat cameraMatrix = _cameraMatrix.getMat();
+
+	Mat rvec = _rvec.getMat(), tvec = _tvec.getMat();
+	CvMat c_cameraMatrix = _cvMat(cameraMatrix);
+	CvMat c_rvec = _cvMat(rvec), c_tvec = _cvMat(tvec);
+
+	double dc0buf[5] = {0};
+	Mat dc0(5, 1, CV_64F, dc0buf);
+	Mat distCoeffs = _distCoeffs.getMat();
+	if (distCoeffs.empty())
+		distCoeffs = dc0;
+	CvMat c_distCoeffs = _cvMat(distCoeffs);
+	int ndistCoeffs = distCoeffs.rows + distCoeffs.cols - 1;
+
+	Mat jacobian;
+	if (_jacobian.needed())
+	{
+		_jacobian.create(npoints * 2, 3 + 3 + 2 + 2 + ndistCoeffs, CV_64F);
+		jacobian = _jacobian.getMat();
+		pdpdrot = &(dpdrot = _cvMat(jacobian.colRange(0, 3)));
+		pdpdt = &(dpdt = _cvMat(jacobian.colRange(3, 6)));
+		pdpdf = &(dpdf = _cvMat(jacobian.colRange(6, 8)));
+		pdpdc = &(dpdc = _cvMat(jacobian.colRange(8, 10)));
+		pdpddist = &(dpddist = _cvMat(jacobian.colRange(10, 10 + ndistCoeffs)));
+	}
+
+	_cvProjectPoints2(&c_objectPoints, &c_rvec, &c_tvec, &c_cameraMatrix, &c_distCoeffs,
+					  &c_imagePoints, pdpdrot, pdpdt, pdpdf, pdpdc, pdpddist, aspectRatio);
+}
+
+namespace _detail
+{
+    template <typename FLOAT>
+    void computeTiltProjectionMatrix(FLOAT tauX,
+                                     FLOAT tauY,
+                                     Matx<FLOAT, 3, 3>* matTilt = 0,
+                                     Matx<FLOAT, 3, 3>* dMatTiltdTauX = 0,
+                                     Matx<FLOAT, 3, 3>* dMatTiltdTauY = 0,
+                                     Matx<FLOAT, 3, 3>* invMatTilt = 0)
+    {
+        FLOAT cTauX = cos(tauX);
+        FLOAT sTauX = sin(tauX);
+        FLOAT cTauY = cos(tauY);
+        FLOAT sTauY = sin(tauY);
+        Matx<FLOAT, 3, 3> matRotX = Matx<FLOAT, 3, 3>(1,0,0,0,cTauX,sTauX,0,-sTauX,cTauX);
+        Matx<FLOAT, 3, 3> matRotY = Matx<FLOAT, 3, 3>(cTauY,0,-sTauY,0,1,0,sTauY,0,cTauY);
+        Matx<FLOAT, 3, 3> matRotXY = matRotY * matRotX;
+        Matx<FLOAT, 3, 3> matProjZ = Matx<FLOAT, 3, 3>(matRotXY(2,2),0,-matRotXY(0,2),0,matRotXY(2,2),-matRotXY(1,2),0,0,1);
+        if (matTilt)
+        {
+            // Matrix for trapezoidal distortion of tilted image sensor
+            *matTilt = matProjZ * matRotXY;
+        }
+        if (dMatTiltdTauX)
+        {
+            // Derivative with respect to tauX
+            Matx<FLOAT, 3, 3> dMatRotXYdTauX = matRotY * Matx<FLOAT, 3, 3>(0,0,0,0,-sTauX,cTauX,0,-cTauX,-sTauX);
+            Matx<FLOAT, 3, 3> dMatProjZdTauX = Matx<FLOAT, 3, 3>(dMatRotXYdTauX(2,2),0,-dMatRotXYdTauX(0,2),
+                                                                 0,dMatRotXYdTauX(2,2),-dMatRotXYdTauX(1,2),0,0,0);
+            *dMatTiltdTauX = (matProjZ * dMatRotXYdTauX) + (dMatProjZdTauX * matRotXY);
+        }
+        if (dMatTiltdTauY)
+        {
+            // Derivative with respect to tauY
+            Matx<FLOAT, 3, 3> dMatRotXYdTauY = Matx<FLOAT, 3, 3>(-sTauY,0,-cTauY,0,0,0,cTauY,0,-sTauY) * matRotX;
+            Matx<FLOAT, 3, 3> dMatProjZdTauY = Matx<FLOAT, 3, 3>(dMatRotXYdTauY(2,2),0,-dMatRotXYdTauY(0,2),
+                                                                 0,dMatRotXYdTauY(2,2),-dMatRotXYdTauY(1,2),0,0,0);
+            *dMatTiltdTauY = (matProjZ * dMatRotXYdTauY) + (dMatProjZdTauY * matRotXY);
+        }
+        if (invMatTilt)
+        {
+            FLOAT inv = 1./matRotXY(2,2);
+            Matx<FLOAT, 3, 3> invMatProjZ = Matx<FLOAT, 3, 3>(inv,0,inv*matRotXY(0,2),0,inv,inv*matRotXY(1,2),0,0,1);
+            *invMatTilt = matRotXY.t()*invMatProjZ;
+        }
+    }
+}
+
+static const char* cvDistCoeffErr = "Distortion coefficients must be 1x4, 4x1, 1x5, 5x1, 1x8, 8x1, 1x12, 12x1, 1x14 or 14x1 floating-point vector";
+
+static void _cvProjectPoints2Internal( const CvMat* objectPoints,
+                                      const CvMat* r_vec,
+                                      const CvMat* t_vec,
+                                      const CvMat* A,
+                                      const CvMat* distCoeffs,
+                                      CvMat* imagePoints, CvMat* dpdr CV_DEFAULT(NULL),
+                                      CvMat* dpdt CV_DEFAULT(NULL), CvMat* dpdf CV_DEFAULT(NULL),
+                                      CvMat* dpdc CV_DEFAULT(NULL), CvMat* dpdk CV_DEFAULT(NULL),
+                                      CvMat* dpdo CV_DEFAULT(NULL),
+                                      double aspectRatio CV_DEFAULT(0) )
+{
+    Ptr<CvMat> matM, _m;
+    Ptr<CvMat> _dpdr, _dpdt, _dpdc, _dpdf, _dpdk;
+    Ptr<CvMat> _dpdo;
+
+    int i, j, count;
+    int calc_derivatives;
+    const CvPoint3D64f* M;
+    CvPoint3D64f* m;
+    double r[3], R[9], dRdr[27], t[3], a[9], k[14] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0}, fx, fy, cx, cy;
+    Matx33d matTilt = Matx33d::eye();
+    Matx33d dMatTiltdTauX(0,0,0,0,0,0,0,-1,0);
+    Matx33d dMatTiltdTauY(0,0,0,0,0,0,1,0,0);
+    CvMat _r, _t, _a = cvMat( 3, 3, CV_64F, a ), _k;
+    CvMat matR = cvMat( 3, 3, CV_64F, R ), _dRdr = cvMat( 3, 9, CV_64F, dRdr );
+    double *dpdr_p = 0, *dpdt_p = 0, *dpdk_p = 0, *dpdf_p = 0, *dpdc_p = 0;
+    double* dpdo_p = 0;
+    int dpdr_step = 0, dpdt_step = 0, dpdk_step = 0, dpdf_step = 0, dpdc_step = 0;
+    int dpdo_step = 0;
+    bool fixedAspectRatio = aspectRatio > FLT_EPSILON;
+
+    if( !CV_IS_MAT(objectPoints) || !CV_IS_MAT(r_vec) ||
+        !CV_IS_MAT(t_vec) || !CV_IS_MAT(A) ||
+        /*!CV_IS_MAT(distCoeffs) ||*/ !CV_IS_MAT(imagePoints) )
+        CV_Error( CV_StsBadArg, "One of required arguments is not a valid matrix" );
+
+    int total = objectPoints->rows * objectPoints->cols * CV_MAT_CN(objectPoints->type);
+    if(total % 3 != 0)
+    {
+        //we have stopped support of homogeneous coordinates because it cause ambiguity in interpretation of the input data
+        CV_Error( CV_StsBadArg, "Homogeneous coordinates are not supported" );
+    }
+    count = total / 3;
+
+    if( CV_IS_CONT_MAT(objectPoints->type) &&
+        (CV_MAT_DEPTH(objectPoints->type) == CV_32F || CV_MAT_DEPTH(objectPoints->type) == CV_64F)&&
+        ((objectPoints->rows == 1 && CV_MAT_CN(objectPoints->type) == 3) ||
+         (objectPoints->rows == count && CV_MAT_CN(objectPoints->type)*objectPoints->cols == 3) ||
+         (objectPoints->rows == 3 && CV_MAT_CN(objectPoints->type) == 1 && objectPoints->cols == count)))
+    {
+        matM.reset(cvCreateMat( objectPoints->rows, objectPoints->cols, CV_MAKETYPE(CV_64F,CV_MAT_CN(objectPoints->type)) ));
+        cvConvert(objectPoints, matM);
+    }
+    else
+    {
+//        matM = cvCreateMat( 1, count, CV_64FC3 );
+//        cvConvertPointsHomogeneous( objectPoints, matM );
+        CV_Error( CV_StsBadArg, "Homogeneous coordinates are not supported" );
+    }
+
+    if( CV_IS_CONT_MAT(imagePoints->type) &&
+        (CV_MAT_DEPTH(imagePoints->type) == CV_32F || CV_MAT_DEPTH(imagePoints->type) == CV_64F) &&
+        ((imagePoints->rows == 1 && CV_MAT_CN(imagePoints->type) == 3) ||
+         (imagePoints->rows == count && CV_MAT_CN(imagePoints->type)*imagePoints->cols == 3) ||
+         (imagePoints->rows == 3 && CV_MAT_CN(imagePoints->type) == 1 && imagePoints->cols == count)))
+    {
+        _m.reset(cvCreateMat( imagePoints->rows, imagePoints->cols, CV_MAKETYPE(CV_64F,CV_MAT_CN(imagePoints->type)) ));
+        cvConvert(imagePoints, _m);
+    }
+    else
+    {
+//        _m = cvCreateMat( 1, count, CV_64FC2 );
+        CV_Error( CV_StsBadArg, "Homogeneous coordinates are not supported" );
+    }
+
+    M = (CvPoint3D64f*)matM->data.db;
+    m = (CvPoint3D64f*)_m->data.db;
+
+    if( (CV_MAT_DEPTH(r_vec->type) != CV_64F && CV_MAT_DEPTH(r_vec->type) != CV_32F) ||
+        (((r_vec->rows != 1 && r_vec->cols != 1) ||
+          r_vec->rows*r_vec->cols*CV_MAT_CN(r_vec->type) != 3) &&
+         ((r_vec->rows != 3 && r_vec->cols != 3) || CV_MAT_CN(r_vec->type) != 1)))
+        CV_Error( CV_StsBadArg, "Rotation must be represented by 1x3 or 3x1 "
+                                "floating-point rotation vector, or 3x3 rotation matrix" );
+
+    if( r_vec->rows == 3 && r_vec->cols == 3 )
+    {
+        _r = cvMat( 3, 1, CV_64FC1, r );
+        cvRodrigues2( r_vec, &_r );
+        cvRodrigues2( &_r, &matR, &_dRdr );
+        cvCopy( r_vec, &matR );
+    }
+    else
+    {
+        _r = cvMat( r_vec->rows, r_vec->cols, CV_MAKETYPE(CV_64F,CV_MAT_CN(r_vec->type)), r );
+        cvConvert( r_vec, &_r );
+        cvRodrigues2( &_r, &matR, &_dRdr );
+    }
+
+    if( (CV_MAT_DEPTH(t_vec->type) != CV_64F && CV_MAT_DEPTH(t_vec->type) != CV_32F) ||
+        (t_vec->rows != 1 && t_vec->cols != 1) ||
+        t_vec->rows*t_vec->cols*CV_MAT_CN(t_vec->type) != 3 )
+        CV_Error( CV_StsBadArg,
+                  "Translation vector must be 1x3 or 3x1 floating-point vector" );
+
+    _t = cvMat( t_vec->rows, t_vec->cols, CV_MAKETYPE(CV_64F,CV_MAT_CN(t_vec->type)), t );
+    cvConvert( t_vec, &_t );
+
+    if( (CV_MAT_TYPE(A->type) != CV_64FC1 && CV_MAT_TYPE(A->type) != CV_32FC1) ||
+        A->rows != 3 || A->cols != 3 )
+        CV_Error( CV_StsBadArg, "Instrinsic parameters must be 3x3 floating-point matrix" );
+
+    cvConvert( A, &_a );
+    fx = a[0]; fy = a[4];
+    cx = a[2]; cy = a[5];
+
+    if( fixedAspectRatio )
+        fx = fy*aspectRatio;
+
+    if( distCoeffs )
+    {
+        if( !CV_IS_MAT(distCoeffs) ||
+            (CV_MAT_DEPTH(distCoeffs->type) != CV_64F &&
+             CV_MAT_DEPTH(distCoeffs->type) != CV_32F) ||
+            (distCoeffs->rows != 1 && distCoeffs->cols != 1) ||
+            (distCoeffs->rows*distCoeffs->cols*CV_MAT_CN(distCoeffs->type) != 4 &&
+             distCoeffs->rows*distCoeffs->cols*CV_MAT_CN(distCoeffs->type) != 5 &&
+             distCoeffs->rows*distCoeffs->cols*CV_MAT_CN(distCoeffs->type) != 8 &&
+             distCoeffs->rows*distCoeffs->cols*CV_MAT_CN(distCoeffs->type) != 12 &&
+             distCoeffs->rows*distCoeffs->cols*CV_MAT_CN(distCoeffs->type) != 14) )
+            CV_Error( CV_StsBadArg, cvDistCoeffErr );
+
+        _k = cvMat( distCoeffs->rows, distCoeffs->cols,
+                    CV_MAKETYPE(CV_64F,CV_MAT_CN(distCoeffs->type)), k );
+        cvConvert( distCoeffs, &_k );
+        if(k[12] != 0 || k[13] != 0)
+        {
+            _detail::computeTiltProjectionMatrix(k[12], k[13],
+                                                &matTilt, &dMatTiltdTauX, &dMatTiltdTauY);
+        }
+    }
+
+    if( dpdr )
+    {
+        if( !CV_IS_MAT(dpdr) ||
+            (CV_MAT_TYPE(dpdr->type) != CV_32FC1 &&
+             CV_MAT_TYPE(dpdr->type) != CV_64FC1) ||
+            dpdr->rows != count*2 || dpdr->cols != 3 )
+            CV_Error( CV_StsBadArg, "dp/drot must be 2Nx3 floating-point matrix" );
+
+        if( CV_MAT_TYPE(dpdr->type) == CV_64FC1 )
+        {
+            _dpdr.reset(cvCloneMat(dpdr));
+        }
+        else
+            _dpdr.reset(cvCreateMat( 2*count, 3, CV_64FC1 ));
+        dpdr_p = _dpdr->data.db;
+        dpdr_step = _dpdr->step/sizeof(dpdr_p[0]);
+    }
+
+    if( dpdt )
+    {
+        if( !CV_IS_MAT(dpdt) ||
+            (CV_MAT_TYPE(dpdt->type) != CV_32FC1 &&
+             CV_MAT_TYPE(dpdt->type) != CV_64FC1) ||
+            dpdt->rows != count*2 || dpdt->cols != 3 )
+            CV_Error( CV_StsBadArg, "dp/dT must be 2Nx3 floating-point matrix" );
+
+        if( CV_MAT_TYPE(dpdt->type) == CV_64FC1 )
+        {
+            _dpdt.reset(cvCloneMat(dpdt));
+        }
+        else
+            _dpdt.reset(cvCreateMat( 2*count, 3, CV_64FC1 ));
+        dpdt_p = _dpdt->data.db;
+        dpdt_step = _dpdt->step/sizeof(dpdt_p[0]);
+    }
+
+    if( dpdf )
+    {
+        if( !CV_IS_MAT(dpdf) ||
+            (CV_MAT_TYPE(dpdf->type) != CV_32FC1 && CV_MAT_TYPE(dpdf->type) != CV_64FC1) ||
+            dpdf->rows != count*2 || dpdf->cols != 2 )
+            CV_Error( CV_StsBadArg, "dp/df must be 2Nx2 floating-point matrix" );
+
+        if( CV_MAT_TYPE(dpdf->type) == CV_64FC1 )
+        {
+            _dpdf.reset(cvCloneMat(dpdf));
+        }
+        else
+            _dpdf.reset(cvCreateMat( 2*count, 2, CV_64FC1 ));
+        dpdf_p = _dpdf->data.db;
+        dpdf_step = _dpdf->step/sizeof(dpdf_p[0]);
+    }
+
+    if( dpdc )
+    {
+        if( !CV_IS_MAT(dpdc) ||
+            (CV_MAT_TYPE(dpdc->type) != CV_32FC1 && CV_MAT_TYPE(dpdc->type) != CV_64FC1) ||
+            dpdc->rows != count*2 || dpdc->cols != 2 )
+            CV_Error( CV_StsBadArg, "dp/dc must be 2Nx2 floating-point matrix" );
+
+        if( CV_MAT_TYPE(dpdc->type) == CV_64FC1 )
+        {
+            _dpdc.reset(cvCloneMat(dpdc));
+        }
+        else
+            _dpdc.reset(cvCreateMat( 2*count, 2, CV_64FC1 ));
+        dpdc_p = _dpdc->data.db;
+        dpdc_step = _dpdc->step/sizeof(dpdc_p[0]);
+    }
+
+    if( dpdk )
+    {
+        if( !CV_IS_MAT(dpdk) ||
+            (CV_MAT_TYPE(dpdk->type) != CV_32FC1 && CV_MAT_TYPE(dpdk->type) != CV_64FC1) ||
+            dpdk->rows != count*2 || (dpdk->cols != 14 && dpdk->cols != 12 && dpdk->cols != 8 && dpdk->cols != 5 && dpdk->cols != 4 && dpdk->cols != 2) )
+            CV_Error( CV_StsBadArg, "dp/df must be 2Nx14, 2Nx12, 2Nx8, 2Nx5, 2Nx4 or 2Nx2 floating-point matrix" );
+
+        if( !distCoeffs )
+            CV_Error( CV_StsNullPtr, "distCoeffs is NULL while dpdk is not" );
+
+        if( CV_MAT_TYPE(dpdk->type) == CV_64FC1 )
+        {
+            _dpdk.reset(cvCloneMat(dpdk));
+        }
+        else
+            _dpdk.reset(cvCreateMat( dpdk->rows, dpdk->cols, CV_64FC1 ));
+        dpdk_p = _dpdk->data.db;
+        dpdk_step = _dpdk->step/sizeof(dpdk_p[0]);
+    }
+
+    if( dpdo )
+    {
+        if( !CV_IS_MAT( dpdo ) || ( CV_MAT_TYPE( dpdo->type ) != CV_32FC1
+                                    && CV_MAT_TYPE( dpdo->type ) != CV_64FC1 )
+            || dpdo->rows != count * 2 || dpdo->cols != count * 3 )
+            CV_Error( CV_StsBadArg, "dp/do must be 2Nx3N floating-point matrix" );
+
+        if( CV_MAT_TYPE( dpdo->type ) == CV_64FC1 )
+        {
+            _dpdo.reset( cvCloneMat( dpdo ) );
+        }
+        else
+            _dpdo.reset( cvCreateMat( 2 * count, 3 * count, CV_64FC1 ) );
+        cvZero(_dpdo);
+        dpdo_p = _dpdo->data.db;
+        dpdo_step = _dpdo->step / sizeof( dpdo_p[0] );
+    }
+
+    calc_derivatives = dpdr || dpdt || dpdf || dpdc || dpdk || dpdo;
+
+    for( i = 0; i < count; i++ )
+    {
+        double X = M[i].x, Y = M[i].y, Z = M[i].z;
+        double x = R[0]*X + R[1]*Y + R[2]*Z + t[0];
+        double y = R[3]*X + R[4]*Y + R[5]*Z + t[1];
+        double z = R[6]*X + R[7]*Y + R[8]*Z + t[2];
+        double r2, r4, r6, a1, a2, a3, cdist, icdist2;
+        double xd, yd, xd0, yd0, invProj;
+        Vec3d vecTilt;
+        Vec3d dVecTilt;
+        Matx22d dMatTilt;
+        Vec2d dXdYd;
+
+        double z0 = z;
+        z = z ? 1./z : 1;
+        x *= z; y *= z;
+
+        r2 = x*x + y*y;
+        r4 = r2*r2;
+        r6 = r4*r2;
+        a1 = 2*x*y;
+        a2 = r2 + 2*x*x;
+        a3 = r2 + 2*y*y;
+        cdist = 1 + k[0]*r2 + k[1]*r4 + k[4]*r6;
+        icdist2 = 1./(1 + k[5]*r2 + k[6]*r4 + k[7]*r6);
+        xd0 = x*cdist*icdist2 + k[2]*a1 + k[3]*a2 + k[8]*r2+k[9]*r4;
+        yd0 = y*cdist*icdist2 + k[2]*a3 + k[3]*a1 + k[10]*r2+k[11]*r4;
+
+        // additional distortion by projecting onto a tilt plane
+        vecTilt = matTilt*Vec3d(xd0, yd0, 1);
+        invProj = vecTilt(2) ? 1./vecTilt(2) : 1;
+        xd = invProj * vecTilt(0);
+        yd = invProj * vecTilt(1);
+
+        m[i].x = xd*fx + cx;
+        m[i].y = yd*fy + cy;
+        m[i].z = z; // Just put the projected Z coordinate here, we mainly care about the sign
+
+        if( calc_derivatives )
+        {
+            if( dpdc_p )
+            {
+                dpdc_p[0] = 1; dpdc_p[1] = 0; // dp_xdc_x; dp_xdc_y
+                dpdc_p[dpdc_step] = 0;
+                dpdc_p[dpdc_step+1] = 1;
+                dpdc_p += dpdc_step*2;
+            }
+
+            if( dpdf_p )
+            {
+                if( fixedAspectRatio )
+                {
+                    dpdf_p[0] = 0; dpdf_p[1] = xd*aspectRatio; // dp_xdf_x; dp_xdf_y
+                    dpdf_p[dpdf_step] = 0;
+                    dpdf_p[dpdf_step+1] = yd;
+                }
+                else
+                {
+                    dpdf_p[0] = xd; dpdf_p[1] = 0;
+                    dpdf_p[dpdf_step] = 0;
+                    dpdf_p[dpdf_step+1] = yd;
+                }
+                dpdf_p += dpdf_step*2;
+            }
+            for (int row = 0; row < 2; ++row)
+                for (int col = 0; col < 2; ++col)
+                    dMatTilt(row,col) = matTilt(row,col)*vecTilt(2)
+                                        - matTilt(2,col)*vecTilt(row);
+            double invProjSquare = (invProj*invProj);
+            dMatTilt *= invProjSquare;
+            if( dpdk_p )
+            {
+                dXdYd = dMatTilt*Vec2d(x*icdist2*r2, y*icdist2*r2);
+                dpdk_p[0] = fx*dXdYd(0);
+                dpdk_p[dpdk_step] = fy*dXdYd(1);
+                dXdYd = dMatTilt*Vec2d(x*icdist2*r4, y*icdist2*r4);
+                dpdk_p[1] = fx*dXdYd(0);
+                dpdk_p[dpdk_step+1] = fy*dXdYd(1);
+                if( _dpdk->cols > 2 )
+                {
+                    dXdYd = dMatTilt*Vec2d(a1, a3);
+                    dpdk_p[2] = fx*dXdYd(0);
+                    dpdk_p[dpdk_step+2] = fy*dXdYd(1);
+                    dXdYd = dMatTilt*Vec2d(a2, a1);
+                    dpdk_p[3] = fx*dXdYd(0);
+                    dpdk_p[dpdk_step+3] = fy*dXdYd(1);
+                    if( _dpdk->cols > 4 )
+                    {
+                        dXdYd = dMatTilt*Vec2d(x*icdist2*r6, y*icdist2*r6);
+                        dpdk_p[4] = fx*dXdYd(0);
+                        dpdk_p[dpdk_step+4] = fy*dXdYd(1);
+
+                        if( _dpdk->cols > 5 )
+                        {
+                            dXdYd = dMatTilt*Vec2d(
+                                    x*cdist*(-icdist2)*icdist2*r2, y*cdist*(-icdist2)*icdist2*r2);
+                            dpdk_p[5] = fx*dXdYd(0);
+                            dpdk_p[dpdk_step+5] = fy*dXdYd(1);
+                            dXdYd = dMatTilt*Vec2d(
+                                    x*cdist*(-icdist2)*icdist2*r4, y*cdist*(-icdist2)*icdist2*r4);
+                            dpdk_p[6] = fx*dXdYd(0);
+                            dpdk_p[dpdk_step+6] = fy*dXdYd(1);
+                            dXdYd = dMatTilt*Vec2d(
+                                    x*cdist*(-icdist2)*icdist2*r6, y*cdist*(-icdist2)*icdist2*r6);
+                            dpdk_p[7] = fx*dXdYd(0);
+                            dpdk_p[dpdk_step+7] = fy*dXdYd(1);
+                            if( _dpdk->cols > 8 )
+                            {
+                                dXdYd = dMatTilt*Vec2d(r2, 0);
+                                dpdk_p[8] = fx*dXdYd(0); //s1
+                                dpdk_p[dpdk_step+8] = fy*dXdYd(1); //s1
+                                dXdYd = dMatTilt*Vec2d(r4, 0);
+                                dpdk_p[9] = fx*dXdYd(0); //s2
+                                dpdk_p[dpdk_step+9] = fy*dXdYd(1); //s2
+                                dXdYd = dMatTilt*Vec2d(0, r2);
+                                dpdk_p[10] = fx*dXdYd(0);//s3
+                                dpdk_p[dpdk_step+10] = fy*dXdYd(1); //s3
+                                dXdYd = dMatTilt*Vec2d(0, r4);
+                                dpdk_p[11] = fx*dXdYd(0);//s4
+                                dpdk_p[dpdk_step+11] = fy*dXdYd(1); //s4
+                                if( _dpdk->cols > 12 )
+                                {
+                                    dVecTilt = dMatTiltdTauX * Vec3d(xd0, yd0, 1);
+                                    dpdk_p[12] = fx * invProjSquare * (
+                                            dVecTilt(0) * vecTilt(2) - dVecTilt(2) * vecTilt(0));
+                                    dpdk_p[dpdk_step+12] = fy*invProjSquare * (
+                                            dVecTilt(1) * vecTilt(2) - dVecTilt(2) * vecTilt(1));
+                                    dVecTilt = dMatTiltdTauY * Vec3d(xd0, yd0, 1);
+                                    dpdk_p[13] = fx * invProjSquare * (
+                                            dVecTilt(0) * vecTilt(2) - dVecTilt(2) * vecTilt(0));
+                                    dpdk_p[dpdk_step+13] = fy * invProjSquare * (
+                                            dVecTilt(1) * vecTilt(2) - dVecTilt(2) * vecTilt(1));
+                                }
+                            }
+                        }
+                    }
+                }
+                dpdk_p += dpdk_step*2;
+            }
+
+            if( dpdt_p )
+            {
+                double dxdt[] = { z, 0, -x*z }, dydt[] = { 0, z, -y*z };
+                for( j = 0; j < 3; j++ )
+                {
+                    double dr2dt = 2*x*dxdt[j] + 2*y*dydt[j];
+                    double dcdist_dt = k[0]*dr2dt + 2*k[1]*r2*dr2dt + 3*k[4]*r4*dr2dt;
+                    double dicdist2_dt = -icdist2*icdist2*(k[5]*dr2dt + 2*k[6]*r2*dr2dt + 3*k[7]*r4*dr2dt);
+                    double da1dt = 2*(x*dydt[j] + y*dxdt[j]);
+                    double dmxdt = (dxdt[j]*cdist*icdist2 + x*dcdist_dt*icdist2 + x*cdist*dicdist2_dt +
+                                    k[2]*da1dt + k[3]*(dr2dt + 4*x*dxdt[j]) + k[8]*dr2dt + 2*r2*k[9]*dr2dt);
+                    double dmydt = (dydt[j]*cdist*icdist2 + y*dcdist_dt*icdist2 + y*cdist*dicdist2_dt +
+                                    k[2]*(dr2dt + 4*y*dydt[j]) + k[3]*da1dt + k[10]*dr2dt + 2*r2*k[11]*dr2dt);
+                    dXdYd = dMatTilt*Vec2d(dmxdt, dmydt);
+                    dpdt_p[j] = fx*dXdYd(0);
+                    dpdt_p[dpdt_step+j] = fy*dXdYd(1);
+                }
+                dpdt_p += dpdt_step*2;
+            }
+
+            if( dpdr_p )
+            {
+                double dx0dr[] =
+                        {
+                                X*dRdr[0] + Y*dRdr[1] + Z*dRdr[2],
+                                X*dRdr[9] + Y*dRdr[10] + Z*dRdr[11],
+                                X*dRdr[18] + Y*dRdr[19] + Z*dRdr[20]
+                        };
+                double dy0dr[] =
+                        {
+                                X*dRdr[3] + Y*dRdr[4] + Z*dRdr[5],
+                                X*dRdr[12] + Y*dRdr[13] + Z*dRdr[14],
+                                X*dRdr[21] + Y*dRdr[22] + Z*dRdr[23]
+                        };
+                double dz0dr[] =
+                        {
+                                X*dRdr[6] + Y*dRdr[7] + Z*dRdr[8],
+                                X*dRdr[15] + Y*dRdr[16] + Z*dRdr[17],
+                                X*dRdr[24] + Y*dRdr[25] + Z*dRdr[26]
+                        };
+                for( j = 0; j < 3; j++ )
+                {
+                    double dxdr = z*(dx0dr[j] - x*dz0dr[j]);
+                    double dydr = z*(dy0dr[j] - y*dz0dr[j]);
+                    double dr2dr = 2*x*dxdr + 2*y*dydr;
+                    double dcdist_dr = (k[0] + 2*k[1]*r2 + 3*k[4]*r4)*dr2dr;
+                    double dicdist2_dr = -icdist2*icdist2*(k[5] + 2*k[6]*r2 + 3*k[7]*r4)*dr2dr;
+                    double da1dr = 2*(x*dydr + y*dxdr);
+                    double dmxdr = (dxdr*cdist*icdist2 + x*dcdist_dr*icdist2 + x*cdist*dicdist2_dr +
+                                    k[2]*da1dr + k[3]*(dr2dr + 4*x*dxdr) + (k[8] + 2*r2*k[9])*dr2dr);
+                    double dmydr = (dydr*cdist*icdist2 + y*dcdist_dr*icdist2 + y*cdist*dicdist2_dr +
+                                    k[2]*(dr2dr + 4*y*dydr) + k[3]*da1dr + (k[10] + 2*r2*k[11])*dr2dr);
+                    dXdYd = dMatTilt*Vec2d(dmxdr, dmydr);
+                    dpdr_p[j] = fx*dXdYd(0);
+                    dpdr_p[dpdr_step+j] = fy*dXdYd(1);
+                }
+                dpdr_p += dpdr_step*2;
+            }
+
+            if( dpdo_p )
+            {
+                double dxdo[] = { z * ( R[0] - x * z * z0 * R[6] ),
+                                  z * ( R[1] - x * z * z0 * R[7] ),
+                                  z * ( R[2] - x * z * z0 * R[8] ) };
+                double dydo[] = { z * ( R[3] - y * z * z0 * R[6] ),
+                                  z * ( R[4] - y * z * z0 * R[7] ),
+                                  z * ( R[5] - y * z * z0 * R[8] ) };
+                for( j = 0; j < 3; j++ )
+                {
+                    double dr2do = 2 * x * dxdo[j] + 2 * y * dydo[j];
+                    double dr4do = 2 * r2 * dr2do;
+                    double dr6do = 3 * r4 * dr2do;
+                    double da1do = 2 * y * dxdo[j] + 2 * x * dydo[j];
+                    double da2do = dr2do + 4 * x * dxdo[j];
+                    double da3do = dr2do + 4 * y * dydo[j];
+                    double dcdist_do
+                            = k[0] * dr2do + k[1] * dr4do + k[4] * dr6do;
+                    double dicdist2_do = -icdist2 * icdist2
+                                         * ( k[5] * dr2do + k[6] * dr4do + k[7] * dr6do );
+                    double dxd0_do = cdist * icdist2 * dxdo[j]
+                                     + x * icdist2 * dcdist_do + x * cdist * dicdist2_do
+                                     + k[2] * da1do + k[3] * da2do + k[8] * dr2do
+                                     + k[9] * dr4do;
+                    double dyd0_do = cdist * icdist2 * dydo[j]
+                                     + y * icdist2 * dcdist_do + y * cdist * dicdist2_do
+                                     + k[2] * da3do + k[3] * da1do + k[10] * dr2do
+                                     + k[11] * dr4do;
+                    dXdYd = dMatTilt * Vec2d( dxd0_do, dyd0_do );
+                    dpdo_p[i * 3 + j] = fx * dXdYd( 0 );
+                    dpdo_p[dpdo_step + i * 3 + j] = fy * dXdYd( 1 );
+                }
+                dpdo_p += dpdo_step * 2;
+            }
+        }
+    }
+
+    if( _m != imagePoints )
+        cvConvert( _m, imagePoints );
+
+    if( _dpdr != dpdr )
+        cvConvert( _dpdr, dpdr );
+
+    if( _dpdt != dpdt )
+        cvConvert( _dpdt, dpdt );
+
+    if( _dpdf != dpdf )
+        cvConvert( _dpdf, dpdf );
+
+    if( _dpdc != dpdc )
+        cvConvert( _dpdc, dpdc );
+
+    if( _dpdk != dpdk )
+        cvConvert( _dpdk, dpdk );
+
+    if( _dpdo != dpdo )
+        cvConvert( _dpdo, dpdo );
+}
+
+static void _cvProjectPoints2( const CvMat* objectPoints,
+                        const CvMat* r_vec,
+                        const CvMat* t_vec,
+                        const CvMat* A,
+                        const CvMat* distCoeffs,
+                        CvMat* imagePoints, CvMat* dpdr,
+                        CvMat* dpdt, CvMat* dpdf,
+                        CvMat* dpdc, CvMat* dpdk,
+                        double aspectRatio )
+{
+    _cvProjectPoints2Internal( objectPoints, r_vec, t_vec, A, distCoeffs, imagePoints, dpdr, dpdt,
+                               dpdf, dpdc, dpdk, NULL, aspectRatio );
 }
--- a/aruco_pose/src/genmap.py
+++ b/aruco_pose/src/genmap.py
@@ -13,7 +13,7 @@
 Generate map file for aruco_map nodelet.

 Usage:
-  genmap.py <length> <x> <y> <dist_x> <dist_y> [<first>] [<x0>] [<y0>] [--top-left | --bottom-left] [-o <filename>]
+  genmap.py <length> <x> <y> <dist_x> <dist_y> [<first>] [<x0>] [<y0>] [--top-left | --bottom-left]
  genmap.py (-h | --help)

 Options:
@@ -27,7 +27,6 @@ Options:
  <y0>           Y coordinate for the first marker [default: 0]
  --top-left     First marker is on top-left (default)
  --bottom-left  First marker is on bottom-left
-  -o <filename>  Output map file name in the 'map' subdirectory of aruco_pose package

 Example:
  rosrun aruco_pose genmap.py 0.33 2 4 1 1 0 > $(catkin_find aruco_pose map)/test_map.txt
@@ -35,8 +34,6 @@ Example:

 from __future__ import print_function

-import sys
-from os import path
 from docopt import docopt


@@ -52,19 +49,14 @@ dist_x = float(arguments['<dist_x>'])
 dist_y = float(arguments['<dist_y>'])
 bottom_left = arguments['--bottom-left']

-if arguments['-o'] is None:
-    output = sys.stdout
-else:
-    output = open(path.join(path.dirname(__file__), '..', 'map', arguments['-o']), 'w')
-
 max_y = y0 + (markers_y - 1) * dist_y

-output.write('# id\tlength\tx\ty\tz\trot_z\trot_y\trot_x\n')
+print('# id\tlength\tx\ty\tz\trot_z\trot_y\trot_x')
 for y in range(markers_y):
    for x in range(markers_x):
        pos_x = x0 + x * dist_x
        pos_y = y0 + y * dist_y
        if not bottom_left:
            pos_y = max_y - pos_y
-        output.write('{}\t{}\t{}\t{}\t{}\t{}\t{}\t{}\n'.format(first, length, pos_x, pos_y, 0, 0, 0, 0))
+        print('{}\t{}\t{}\t{}\t{}\t{}\t{}\t{}'.format(first, length, pos_x, pos_y, 0, 0, 0, 0))
        first += 1
--- a/aruco_pose/vendor/VendorOpenCV.cmake
+++ b/aruco_pose/vendor/VendorOpenCV.cmake
@@ -7,7 +7,6 @@ endif()

 message(STATUS "Adding vendored aruco_pose OpenCV module")
 add_library(_opencv_aruco STATIC
-  vendor/aruco/src/apriltag_quad_thresh.cpp
  vendor/aruco/src/aruco.cpp
  vendor/aruco/src/charuco.cpp
  vendor/aruco/src/dictionary.cpp
@@ -24,7 +23,7 @@ target_compile_definitions(_opencv_aruco PRIVATE
  CV_OVERRIDE=override
 )
 target_compile_options(_opencv_aruco PRIVATE
-  -fpic -fPIC -fvisibility=hidden
+  -fpic -fPIC
 )

 target_include_directories(_opencv_aruco PUBLIC
--- a/aruco_pose/vendor/aruco/src/apriltag_quad_thresh.cpp
+++ b/aruco_pose/vendor/aruco/src/apriltag_quad_thresh.cpp
@@ -94,7 +94,7 @@ void ptsort_(struct pt *pts, int sz)

    // Use stack storage if it's not too big.
    cv::AutoBuffer<struct pt, 1024> _tmp_stack(sz);
-    memcpy(_tmp_stack, pts, sizeof(struct pt) * sz);
+    memcpy(_tmp_stack.data(), pts, sizeof(struct pt) * sz);

    int asz = sz/2;
    int bsz = sz - asz;
@@ -470,11 +470,11 @@ int quad_segment_agg(int sz, struct line_fit_pt *lfps, int indices[4]){
    int rvalloc_pos = 0;
    int rvalloc_size = 3*sz;
    cv::AutoBuffer<struct remove_vertex, 0> rvalloc_(std::max(1, rvalloc_size));
-    memset(rvalloc_, 0, sizeof(rvalloc_[0]) * rvalloc_.size()); // TODO Add AutoBuffer zero fill
-    struct remove_vertex *rvalloc = rvalloc_;
+    memset(rvalloc_.data(), 0, sizeof(rvalloc_[0]) * rvalloc_.size()); // TODO Add AutoBuffer zero fill
+    struct remove_vertex *rvalloc = rvalloc_.data();
    cv::AutoBuffer<struct segment, 0> segs_(std::max(1, sz)); // TODO Add AutoBuffer zero fill
-    memset(segs_, 0, sizeof(segs_[0]) * segs_.size());
-    struct segment *segs = segs_;
+    memset(segs_.data(), 0, sizeof(segs_[0]) * segs_.size());
+    struct segment *segs = segs_.data();

    // populate with initial entries
    for (int i = 0; i < sz; i++) {
@@ -753,8 +753,8 @@ int fit_quad(const Ptr<DetectorParameters> &_params, const Mat im, zarray_t *clu
    // efficiently computed for any contiguous range of indices.

    cv::AutoBuffer<struct line_fit_pt, 64> lfps_(sz);
-    memset(lfps_, 0, sizeof(lfps_[0]) * lfps_.size()); // TODO Add AutoBuffer zero fill
-    struct line_fit_pt *lfps = lfps_;
+    memset(lfps_.data(), 0, sizeof(lfps_[0]) * lfps_.size()); // TODO Add AutoBuffer zero fill
+    struct line_fit_pt *lfps = lfps_.data();

    for (int i = 0; i < sz; i++) {
        struct pt *p;
--- a/book.json
+++ b/book.json
@@ -10,7 +10,7 @@
        "yametrika",
        "anchors",
        "collapsible-menu",
-        "validate-links@https://github.com/okalachev/gitbook-plugin-validate-links.git",
+        "validate-links",
        "bulk-redirect@https://github.com/okalachev/gitbook-plugin-bulk-redirect.git",
        "sitemap@https://github.com/okalachev/plugin-sitemap.git",
        "toolbar@https://github.com/hamishwillee/gitbook-plugin-toolbar.git",
--- a/builder/assets/clever/setup.py
+++ b/builder/assets/clever/setup.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python

 from distutils.core import setup

--- a/builder/assets/clover.service
+++ b/builder/assets/clover.service
@@ -8,9 +8,5 @@ ExecStart=/bin/bash -c ". /home/pi/catkin_ws/devel/setup.sh; \
                      ROS_HOSTNAME=`hostname`.local exec stdbuf -o L roslaunch clover clover.launch --wait --screen --skip-log-check \
                      2> >(tee /tmp/clover.err)"

-ExecStartPre=+rm /var/log/clover.log
-StandardOutput=file:/var/log/clover.log
-StandardError=file:/var/log/clover.log
-
 [Install]
 WantedBy=multi-user.target
--- a/builder/assets/examples/flight.py
+++ b/builder/assets/examples/flight.py
@@ -15,17 +15,17 @@ set_attitude = rospy.ServiceProxy('set_attitude', srv.SetAttitude)
 set_rates = rospy.ServiceProxy('set_rates', srv.SetRates)
 land = rospy.ServiceProxy('land', Trigger)

-print('Take off and hover 1 m above the ground')
+# Take off and hover 1 m above the ground
 navigate(x=0, y=0, z=1, frame_id='body', auto_arm=True)

-# Wait for 5 seconds
-rospy.sleep(5)
+# Wait for 3 seconds
+rospy.sleep(3)

-print('Fly forward 1 m')
+# Fly forward 1 m
 navigate(x=1, y=0, z=0, frame_id='body')

-# Wait for 5 seconds
-rospy.sleep(5)
+# Wait for 3 seconds
+rospy.sleep(3)

-print('Perform landing')
+# Perform landing
 land()
--- a/builder/assets/examples/flight_marker.py
+++ b/builder/assets/examples/flight_marker.py
@@ -15,23 +15,23 @@ set_attitude = rospy.ServiceProxy('set_attitude', srv.SetAttitude)
 set_rates = rospy.ServiceProxy('set_rates', srv.SetRates)
 land = rospy.ServiceProxy('land', Trigger)

-print('Take off and hover 1 m above the ground')
+# Take off and hover 1 m above the ground
 navigate(x=0, y=0, z=1, frame_id='body', auto_arm=True)

-# Wait for 5 seconds
-rospy.sleep(5)
+# Wait for 3 seconds
+rospy.sleep(3)

-print('Fly 1 meter above ArUco marker 0')
+# Fly 1 meter above ArUco marker 0
 navigate(x=0, y=0, z=1, frame_id='aruco_0')

-# Wait for 5 seconds
-rospy.sleep(5)
+# Wait for 3 seconds
+rospy.sleep(3)

-print('Fly to x=1 y=1 z=1 relative to ArUco markers map')
+# Fly to x=1 y=1 z=1 relative to ArUco markers map
 navigate(x=1, y=1, z=1, frame_id='aruco_map')

-# Wait for 5 seconds
-rospy.sleep(5)
+# Wait for 3 seconds
+rospy.sleep(3)

-print('Perform landing')
+# Perform landing
 land()
--- a/builder/assets/examples/leds.py
+++ b/builder/assets/examples/leds.py
--- a/builder/assets/examples/navigate_wait.py
+++ b/builder/assets/examples/navigate_wait.py
@@ -31,11 +31,11 @@ def navigate_wait(x=0, y=0, z=0, yaw=float('nan'), yaw_rate=0, speed=0.5, \
            return res
        rospy.sleep(0.2)

-print('Take off 1 meter')
+# Take off 1 meter
 navigate_wait(z=1, frame_id='body', auto_arm=True)

-print('Fly forward 1 m')
+# Fly forward 1 m
 navigate_wait(x=1, frame_id='body')

-print('Land')
+# Land
 land()
--- a/builder/assets/hardware_setup.sh
+++ b/builder/assets/hardware_setup.sh
@@ -79,4 +79,10 @@ if ! grep -q "^bcm2835-v4l2" /etc/modules;
 then printf "bcm2835-v4l2\n" >> /etc/modules
 fi

-echo_stamp "#8 End of configure hardware interfaces"
+echo_stamp "#8 Check if Compute Module 4"
+if grep -q "Compute Module 4" "/proc/device-tree/model"; then
+  echo_stamp "Enable USB on Compute Module 4"
+  echo "dtoverlay=dwc2,dr_mode=host" >> /boot/config.txt
+fi
+
+echo_stamp "#9 End of configure hardware interfaces"
--- a/builder/assets/install_gitbook.sh
+++ b/builder/assets/install_gitbook.sh
@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-
-# GitBook CLI is deprecated, its installation is broken.
-# This script fixes it until we stop using GitBook.
-
-export NPM_CONFIG_UNSAFE_PERM=1
-
-npm install gitbook-cli -g
-gitbook fetch 3.2.3 && npm i npm@3.10.10 --prefix=~/.gitbook/versions/3.2.3/ # fixing https://travis-ci.org/github/CopterExpress/clover/jobs/766541125#L932
--- a/builder/assets/noetic-rosdep-clover.yaml
+++ b/builder/assets/noetic-rosdep-clover.yaml
@@ -1,18 +0,0 @@
-async_web_server_cpp:
-  debian:
-    buster: [ros-noetic-async-web-server-cpp]
-led_msgs:
-  debian:
-    buster: [ros-noetic-led-msgs]
-ros_pytest:
-  debian:
-    buster: [ros-noetic-ros-pytest]
-tf2_web_republisher:
-  debian:
-    buster: [ros-noetic-tf2-web-republisher]
-web_video_server:
-  debian:
-    buster: [ros-noetic-web-video-server]
-ws281x:
-  debian:
-    buster: [ros-noetic-ws281x]
--- a/builder/assets/roscore.service
+++ b/builder/assets/roscore.service
@@ -3,7 +3,7 @@ Description=Launcher for the ROS master, parameter server and rosout logging nod

 [Service]
 User=pi
-ExecStart=/bin/sh -c ". /opt/ros/noetic/setup.sh; ROS_HOSTNAME=`hostname`.local exec roscore"
+ExecStart=/bin/sh -c ". /opt/ros/melodic/setup.sh; ROS_HOSTNAME=`hostname`.local exec roscore"
 Restart=on-failure
 RestartSec=3

--- a/builder/image-build.sh
+++ b/builder/image-build.sh
@@ -15,8 +15,7 @@

 set -e # Exit immidiately on non-zero result

-# https://www.raspberrypi.org/software/operating-systems/#raspberry-pi-os-32-bit
-SOURCE_IMAGE="https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-05-28/2021-05-07-raspios-buster-armhf-lite.zip"
+SOURCE_IMAGE="https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-01-12/2021-01-11-raspios-buster-armhf-lite.zip"

 export DEBIAN_FRONTEND=${DEBIAN_FRONTEND:='noninteractive'}
 export LANG=${LANG:='C.UTF-8'}
@@ -105,6 +104,8 @@ ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/butterf
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/monkey.service' '/lib/systemd/system/'
 # software install
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} exec ${SCRIPTS_DIR}'/image-software.sh'
+# examples
+${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/examples' '/home/pi/'  # TODO: symlink?
 # network setup
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} exec ${SCRIPTS_DIR}'/image-network.sh'
 # avahi setup
@@ -113,11 +114,15 @@ ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/avahi-s
 # If RPi then use a one thread to build a ROS package on RPi, else use all
 [[ $(arch) == 'armv7l' ]] && NUMBER_THREADS=1 || NUMBER_THREADS=$(nproc --all)
 # Clover
-${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/noetic-rosdep-clover.yaml' '/etc/ros/rosdep/'
+${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/clover.service' '/lib/systemd/system/'
+${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/roscore.service' '/lib/systemd/system/'
+${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/melodic-rosdep-clover.yaml' '/etc/ros/rosdep/'
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/ros_python_paths' '/etc/sudoers.d/'
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/pigpiod.service' '/lib/systemd/system/'
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/launch.nanorc' '/usr/share/nano/'
 # ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${SCRIPTS_DIR}'/assets/kinetic-ros-clover.rosinstall' '/home/pi/ros_catkin_ws/'
+# Add PX4 udev rules
+${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} copy ${REPO_DIR}'/clover/config/99-px4fmu.rules' '/lib/udev/rules.d/'
 # Add rename script
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} exec ${SCRIPTS_DIR}'/image-ros.sh' ${REPO_URL} ${IMAGE_VERSION} false false ${NUMBER_THREADS}
 ${BUILDER_DIR}/image-chroot.sh ${IMAGE_PATH} exec ${SCRIPTS_DIR}'/image-validate.sh'
--- a/builder/image-network.sh
+++ b/builder/image-network.sh
@@ -60,4 +60,25 @@ domain-needed
 quiet-dhcp6
 EOF

-echo_stamp "#4 End of network installation"
+echo_stamp "#4 Build the RTL8814AU Wi-Fi adapter driver"
+wget http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel-headers_1.20210108-1_armhf.deb
+dpkg -i raspberrypi-kernel-headers_1.20210108-1_armhf.deb
+cd /home/pi
+git clone https://github.com/aircrack-ng/rtl8812au.git --depth=1
+cd rtl8812au
+echo kernel version: $(uname -r)
+echo kernel version from procfs: $(cat /proc/version)
+echo version: $(git describe --tags --always)
+sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile # https://github.com/aircrack-ng/rtl8812au#for-raspberry-rpi
+sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefile
+# sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makefile
+apt-cache policy raspberrypi-kernel-headers
+# apt-get install -y raspberrypi-kernel-headers=1.20210108 dkms
+apt-get install -y dkms
+ls /lib/modules
+echo make
+make KERNEL_VER=5.4.83-v7l+ KVER=5.4.83-v7l+
+echo make install
+make install KERNEL_VER=5.4.83-v7l+ KVER=5.4.83-v7l+
+
+echo_stamp "#5 End of network installation"
--- a/builder/image-ros.sh
+++ b/builder/image-ros.sh
@@ -21,9 +21,6 @@ INSTALL_ROS_PACK_SOURCES=$3
 DISCOVER_ROS_PACK=$4
 NUMBER_THREADS=$5

-# Current ROS distribution
-ROS_DISTRO=noetic
-
 echo_stamp() {
  # TEMPLATE: echo_stamp <TEXT> <TYPE>
  # TYPE: SUCCESS, ERROR, INFO
@@ -71,8 +68,7 @@ my_travis_retry() {
 # TODO: 'kinetic-rosdep-clover.yaml' should add only if we use our repo?
 echo_stamp "Init rosdep"
 my_travis_retry rosdep init
-# FIXME: Re-add this after missing packages are built
-echo "yaml file:///etc/ros/rosdep/${ROS_DISTRO}-rosdep-clover.yaml" >> /etc/ros/rosdep/sources.list.d/20-default.list
+echo "yaml file:///etc/ros/rosdep/melodic-rosdep-clover.yaml" >> /etc/ros/rosdep/sources.list.d/20-default.list
 my_travis_retry rosdep update

 echo_stamp "Populate rosdep for ROS user"
@@ -80,40 +76,22 @@ my_travis_retry sudo -u pi rosdep update

 export ROS_IP='127.0.0.1' # needed for running tests

-# echo_stamp "Reconfiguring Clover repository for simplier unshallowing"
-cd /home/pi/catkin_ws/src/clover
-git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*"
-
-# This is sort of a hack to force "custom" packages to be installed - the ones built by COEX, linked against OpenCV 4.2
-# I **wish** OpenCV would not be such a mess, but, well, here we are.
-echo_stamp "Installing OpenCV 4.2-compatible ROS packages"
-apt install -y --no-install-recommends \
-ros-${ROS_DISTRO}-compressed-image-transport=1.14.0-0buster \
-ros-${ROS_DISTRO}-cv-bridge=1.15.0-0buster \
-ros-${ROS_DISTRO}-cv-camera=0.5.0-0buster \
-ros-${ROS_DISTRO}-image-publisher=1.15.3-0buster \
-ros-${ROS_DISTRO}-web-video-server=0.2.1-0buster
-apt-mark hold \
-ros-${ROS_DISTRO}-compressed-image-transport \
-ros-${ROS_DISTRO}-cv-bridge \
-ros-${ROS_DISTRO}-cv-camera \
-ros-${ROS_DISTRO}-image-publisher \
-ros-${ROS_DISTRO}-web-video-server
-
-echo_stamp "Installing libboost-dev" # https://travis-ci.org/github/CopterExpress/clover/jobs/766318908#L6536
-my_travis_retry apt-get install -y --no-install-recommends libboost-dev libboost-all-dev
+# echo_stamp "Reconfiguring Clover repository for simplier unshallowing" # TODO: bring back
+# cd /home/pi/catkin_ws/src/clover
+# git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*"
+echo_stamp "Remove .git from Clover to reduce the size"
+rm -rf /home/pi/catkin_ws/src/clover/.git # TODO: remove

 echo_stamp "Build and install Clover"
 cd /home/pi/catkin_ws
 # Don't try to install gazebo_ros
-my_travis_retry rosdep install -y --from-paths src --ignore-src --rosdistro ${ROS_DISTRO} --os=debian:buster \
+my_travis_retry rosdep install -y --from-paths src --ignore-src --rosdistro melodic --os=debian:buster \
  --skip-keys=gazebo_ros --skip-keys=gazebo_plugins
-my_travis_retry pip3 install wheel
-my_travis_retry pip3 install -r /home/pi/catkin_ws/src/clover/clover/requirements.txt
-source /opt/ros/${ROS_DISTRO}/setup.bash
+my_travis_retry pip install wheel
+my_travis_retry pip install -r /home/pi/catkin_ws/src/clover/clover/requirements.txt
+source /opt/ros/melodic/setup.bash
 # Don't build simulation plugins for actual drone
-catkin_make -j2 -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCATKIN_BLACKLIST_PACKAGES=clover_gazebo_plugins
-source devel/setup.bash
+catkin_make -j2 -DCMAKE_BUILD_TYPE=Release -DCATKIN_BLACKLIST_PACKAGES=clover_gazebo_plugins

 echo_stamp "Install clever package (for backwards compatibility)"
 cd /home/pi/catkin_ws/src/clover/builder/assets/clever
@@ -122,27 +100,30 @@ rm -rf build  # remove build artifacts

 echo_stamp "Build Clover documentation"
 cd /home/pi/catkin_ws/src/clover
-builder/assets/install_gitbook.sh
-gitbook install
+NPM_CONFIG_UNSAFE_PERM=true npm install gitbook-cli -g
+NPM_CONFIG_UNSAFE_PERM=true gitbook install
 gitbook build
 touch node_modules/CATKIN_IGNORE docs/CATKIN_IGNORE _book/CATKIN_IGNORE clover/www/CATKIN_IGNORE apps/CATKIN_IGNORE # ignore documentation files by catkin

 echo_stamp "Installing additional ROS packages"
 my_travis_retry apt-get install -y --no-install-recommends \
-    ros-${ROS_DISTRO}-dynamic-reconfigure \
-    ros-${ROS_DISTRO}-rosbridge-suite \
-    ros-${ROS_DISTRO}-rosserial \
-    ros-${ROS_DISTRO}-usb-cam \
-    ros-${ROS_DISTRO}-vl53l1x \
-    ros-${ROS_DISTRO}-ws281x \
-    ros-${ROS_DISTRO}-rosshow \
-    ros-${ROS_DISTRO}-cmake-modules \
-    ros-${ROS_DISTRO}-image-view
+    ros-melodic-dynamic-reconfigure \
+    ros-melodic-compressed-image-transport \
+    ros-melodic-rosbridge-suite \
+    ros-melodic-rosserial \
+    ros-melodic-usb-cam \
+    ros-melodic-vl53l1x \
+    ros-melodic-ws281x \
+    ros-melodic-rosshow

 # TODO move GeographicLib datasets to Mavros debian package
 echo_stamp "Install GeographicLib datasets (needed for mavros)" \
 && wget -qO- https://raw.githubusercontent.com/mavlink/mavros/master/mavros/scripts/install_geographiclib_datasets.sh | bash

+# FIXME: Buster comes with tornado==5.1.1 but we need tornado==4.2.1 for rosbridge_suite
+# (note that Python 3 will still have a more recent version)
+pip install tornado==4.2.1
+
 echo_stamp "Running tests"
 cd /home/pi/catkin_ws
 # FIXME: Investigate failing tests
@@ -151,26 +132,15 @@ catkin_make run_tests #&& catkin_test_results
 echo_stamp "Change permissions for catkin_ws"
 chown -Rf pi:pi /home/pi/catkin_ws

-echo_stamp "Make \$HOME/examples symlink"
-ln -s "$(catkin_find clover examples --first-only)" /home/pi
+echo_stamp "Change permissions for examples"
 chown -Rf pi:pi /home/pi/examples

-echo_stamp "Make systemd services symlinks"
-ln -s /home/pi/catkin_ws/src/clover/builder/assets/clover.service /lib/systemd/system/
-ln -s /home/pi/catkin_ws/src/clover/builder/assets/roscore.service /lib/systemd/system/
-# validate
-[ -f /lib/systemd/system/clover.service ]
-[ -f /lib/systemd/system/roscore.service ]
-
-echo_stamp "Make udev rules symlink"
-ln -s "$(catkin_find clover udev --first-only)"/* /lib/udev/rules.d/
-
 echo_stamp "Setup ROS environment"
 cat << EOF >> /home/pi/.bashrc
 LANG='C.UTF-8'
 LC_ALL='C.UTF-8'
 export ROS_HOSTNAME=\`hostname\`.local
-source /opt/ros/${ROS_DISTRO}/setup.bash
+source /opt/ros/melodic/setup.bash
 source /home/pi/catkin_ws/devel/setup.bash
 EOF

--- a/builder/image-software.sh
+++ b/builder/image-software.sh
@@ -64,14 +64,15 @@ echo "APT::Acquire::Retries \"3\";" > /etc/apt/apt.conf.d/80-retries
 echo_stamp "Install apt keys & repos"

 # TODO: This STDOUT consist 'OK'
+curl http://deb.coex.tech/aptly_repo_signing.key 2> /dev/null | apt-key add -
 apt-get update \
 && apt-get install --no-install-recommends -y dirmngr > /dev/null \
 && apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-key C1CF6E31E6BADE8868B172B4F42ED6FBAB17C654

 echo "deb http://packages.ros.org/ros/ubuntu buster main" > /etc/apt/sources.list.d/ros-latest.list
-
-wget -O - 'http://packages.coex.tech/key.asc' | apt-key add - 
-echo 'deb http://packages.coex.tech buster main' >> /etc/apt/sources.list
+echo "deb http://deb.coex.tech/opencv3 buster main" > /etc/apt/sources.list.d/opencv3.list
+echo "deb http://deb.coex.tech/rpi-ros-melodic buster main" > /etc/apt/sources.list.d/rpi-ros-melodic.list
+echo "deb http://deb.coex.tech/clover buster main" > /etc/apt/sources.list.d/clover.list

 echo_stamp "Update apt cache"

@@ -98,18 +99,18 @@ tree \
 vim \
 libjpeg8 \
 tcpdump \
+ltrace \
 libpoco-dev \
 libzbar0 \
-python3-rosdep \
-python3-rosinstall-generator \
-python3-wstool \
-python3-rosinstall \
+python-rosdep \
+python-rosinstall-generator \
+python-wstool \
+python-rosinstall \
 build-essential \
 libffi-dev \
 monkey \
 pigpio python-pigpio python3-pigpio \
 i2c-tools \
-espeak espeak-data python-espeak python3-espeak \
 ntpdate \
 python-dev \
 python3-dev \
@@ -143,17 +144,16 @@ my_travis_retry pip3 install butterfly[systemd]
 systemctl enable butterfly.socket

 echo_stamp "Install ws281x library"
-my_travis_retry pip3 install --prefer-binary rpi_ws281x
+my_travis_retry pip install --prefer-binary rpi_ws281x

 echo_stamp "Setup Monkey"
 mv /etc/monkey/sites/default /etc/monkey/sites/default.orig
 mv /root/monkey /etc/monkey/sites/default
-sed -i 's/SymLink Off/SymLink On/' /etc/monkey/monkey.conf
 systemctl enable monkey.service

 echo_stamp "Install Node.js"
 cd /home/pi
-wget --no-verbose https://nodejs.org/dist/v10.15.0/node-v10.15.0-linux-armv6l.tar.gz
+wget https://nodejs.org/dist/v10.15.0/node-v10.15.0-linux-armv6l.tar.gz
 tar -xzf node-v10.15.0-linux-armv6l.tar.gz
 cp -R node-v10.15.0-linux-armv6l/* /usr/local/
 rm -rf node-v10.15.0-linux-armv6l/
--- a/builder/image-validate.sh
+++ b/builder/image-validate.sh
@@ -16,24 +16,16 @@ set -ex

 echo "Run image tests"

-export ROS_DISTRO='noetic'
+export ROS_DISTRO='melodic'
 export ROS_IP='127.0.0.1'
-source /opt/ros/${ROS_DISTRO}/setup.bash
+source /opt/ros/melodic/setup.bash
 source /home/pi/catkin_ws/devel/setup.bash
-systemctl start roscore

 cd /home/pi/catkin_ws/src/clover/builder/test/
 ./tests.sh
 ./tests.py
 ./tests_py3.py
-[[ $(./test_qr.py) == "Found QRCODE with data Проверка Unicode with center at x=66.0, y=66.0" ]] 
 [[ $(./tests_clever.py) == "Warning: clever package is renamed to clover" ]]  # test backwards compatibility

-systemctl stop roscore
-
-# check documented packages available
-apt-cache show gst-rtsp-launch
-apt-cache show openvpn
-
 echo "Move /etc/ld.so.preload back to its original position"
 mv /etc/ld.so.preload.disabled-for-build /etc/ld.so.preload
--- a/builder/standalone-install.sh
+++ b/builder/standalone-install.sh
@@ -3,45 +3,25 @@
 # Perform a "standalone install" in a Docker container
 set -e
 # Step 1: Install pip
-apt-key adv --keyserver 'hkp://keyserver.ubuntu.com:80' --recv-key C1CF6E31E6BADE8868B172B4F42ED6FBAB17C654 # https://github.com/osrf/docker_images/issues/535
-apt-get update
-apt-get install -y curl
-if [ "x${ROS_PYTHON_VERSION}" = "x3" ]; then
-  PYTHON=python3
-  curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
-else
-  PYTHON=python
-  curl https://bootstrap.pypa.io/pip/2.7/get-pip.py -o get-pip.py
-fi
-${PYTHON} ./get-pip.py
+apt update
+apt install -y curl
+curl https://bootstrap.pypa.io/pip/2.7/get-pip.py -o get-pip.py
+python ./get-pip.py

 # Step 1.5: Add deb.coex.tech to apt
 curl http://deb.coex.tech/aptly_repo_signing.key 2> /dev/null | apt-key add -
 echo "deb http://deb.coex.tech/ros xenial main" > /etc/apt/sources.list.d/coex.tech.list
 echo "yaml file:///etc/ros/rosdep/coex.yaml" > /etc/ros/rosdep/sources.list.d/99-coex.list
-CODENAME=$(lsb_release -sc)
-
 cat <<EOF > /etc/ros/rosdep/coex.yaml
 led_msgs:
  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-led-msgs]
-async_web_server_cpp:
-  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-async-web-server-cpp]
-ros_pytest:
-  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-ros-pytest]
-tf2_web_republisher:
-  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-tf2-web-republisher]
-web_video_server:
-  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-web-video-server]
-ws281x:
-  ubuntu:
-    ${CODENAME}: [ros-${ROS_DISTRO}-ws281x]
+    xenial: ros-kinetic-led-msgs
+    bionic: ros-melodic-led-msgs
+  debian:
+    stretch: ros-kinetic-led-msgs
+    buster: ros-melodic-led-msgs
 EOF
-apt-get update
+apt update
 rosdep update

 # Step 2: Run rosdep to install all dependencies
@@ -57,10 +37,7 @@ cd /root/catkin_ws
 catkin_make

 # Step 4: Run tests
-${PYTHON} -m pip install --upgrade pytest
+pip install --upgrade pytest
 cd /root/catkin_ws
 source devel/setup.bash
 catkin_make run_tests && catkin_test_results
-
-# Step 5: Install packages
-catkin_make install
--- a/builder/test/qr.png
+++ b/builder/test/qr.png
--- a/builder/test/test_qr.py
+++ b/builder/test/test_qr.py
@@ -1,42 +0,0 @@
-#!/usr/bin/env python3
-
-# Test QG recognition example
-# Should be synced with the documentation: /docs/en/camera.md, /docs/ru/camera.md
-# TODO: use real ROS topics
-
-import rospy
-from pyzbar import pyzbar
-from cv_bridge import CvBridge
-from sensor_msgs.msg import Image
-
-bridge = CvBridge()
-
-# rospy.init_node('barcode_test')
-
-# Image subscriber callback function
-def image_callback(data):
-    cv_image = bridge.imgmsg_to_cv2(data, 'bgr8')  # OpenCV image
-    barcodes = pyzbar.decode(cv_image)
-    for barcode in barcodes:
-        b_data = barcode.data.decode("utf-8")
-        b_type = barcode.type
-        (x, y, w, h) = barcode.rect
-        xc = x + w/2
-        yc = y + h/2
-        print("Found {} with data {} with center at x={}, y={}".format(b_type, b_data, xc, yc))
-    # rospy.signal_shutdown('done')
-
-# image_sub = rospy.Subscriber('main_camera/image_raw', Image, image_callback, queue_size=1)
-
-# ==============================================================================
-# Publish test image
-# rospy.sleep(2)
-
-import cv2
-img = cv2.imread('qr.png')
-image_callback(bridge.cv2_to_imgmsg(img, 'bgr8'))
-
-# image_pub = rospy.Publisher('/main_camera/image_raw', Image, queue_size=1, latch=True)
-# image_pub.publish(bridge.cv2_to_imgmsg(img, 'bgr8'))
-
-# rospy.spin()
--- a/builder/test/tests.py
+++ b/builder/test/tests.py
@@ -1,29 +1,21 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python

 # validate all required modules installed

 import rospy
 from geometry_msgs.msg import PoseStamped
-from sensor_msgs.msg import Range, BatteryState

 import cv2
 import cv2.aruco
-from sensor_msgs.msg import Image
-from cv_bridge import CvBridge

 import numpy
 import mavros
-from mavros_msgs.msg import State, StatusText, ExtendedState, RCIn, Mavlink
+from mavros_msgs.msg import State, StatusText, ExtendedState
 from mavros_msgs.srv import CommandBool, CommandLong, SetMode

 from std_srvs.srv import Trigger
 from clover.srv import GetTelemetry, Navigate, NavigateGlobal, SetPosition, SetVelocity, \
    SetAttitude, SetRates, SetLEDEffect
-from led_msgs.srv import SetLEDs
-from led_msgs.msg import LEDStateArray, LEDState
-from aruco_pose.msg import Marker, MarkerArray, Point2D
-
-import dynamic_reconfigure.client

 import tf2_ros
 import tf2_geometry_msgs
@@ -36,4 +28,4 @@ import pigpio
 # from espeak import espeak
 from pyzbar import pyzbar

-print(cv2.getBuildInformation())
+print cv2.getBuildInformation()
--- a/builder/test/tests.sh
+++ b/builder/test/tests.sh
@@ -34,7 +34,6 @@ i2cdetect -V
 butterfly -h
 # espeak --version
 mjpg_streamer --version
-systemctl --version

 # ros stuff

@@ -55,8 +54,6 @@ rosversion usb_cam
 rosversion cv_camera
 rosversion web_video_server
 rosversion rosshow
-rosversion nodelet
-rosversion image_view

 # validate examples are present
 [[ $(ls /home/pi/examples/*) ]]
--- a/builder/test/tests_clever.py
+++ b/builder/test/tests_clever.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python

 # test backwards compatibility

--- a/check_unused_assets.py
+++ b/check_unused_assets.py
@@ -5,7 +5,7 @@ import sys
 import subprocess

 EXCLUDE = ('clever4-front-white.png', 'clever4-front-white-large.png', '.DS_Store',
-    'clever4-front-black-large.png','clover42-black.png', 'clover42-main-margin.png')
+    'clever4-front-black-large.png','clover42-black.png')

 code = 0

--- a/clover/CMakeLists.txt
+++ b/clover/CMakeLists.txt
@@ -1,4 +1,4 @@
-cmake_minimum_required(VERSION 3.0)
+cmake_minimum_required(VERSION 2.8.3)
 project(clover)

 ## Compile as C++11, supported in ROS Kinetic and newer
@@ -30,15 +30,7 @@ list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}/cmake")

 find_package(GeographicLib REQUIRED)

-# Workaround for OpenCV 3/4 support
-set(_opencv_version 4)
-find_package(OpenCV ${_opencv_version} QUIET COMPONENTS calib3d imgproc)
-if (NOT OpenCV_FOUND)
-  message(STATUS "Did not find OpenCV 4, searching for OpenCV 3")
-  set(_opencv_version 3)
-endif()
-
-find_package(OpenCV ${_opencv_version} REQUIRED
+find_package(OpenCV 3 REQUIRED
  COMPONENTS
    calib3d
    imgproc
@@ -241,12 +233,12 @@ target_link_libraries(${PROJECT_NAME}
 #   DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
 # )

-# Mark executables and/or libraries for installation
-install(TARGETS simple_offboard clover_rc camera_markers vpe_publisher clover_led shell clover
-  ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
-  LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
-  RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
-)
+## Mark executables and/or libraries for installation
+# install(TARGETS ${PROJECT_NAME} ${PROJECT_NAME}_node
+#   ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
+#   RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
+# )

 ## Mark cpp header files for installation
 # install(DIRECTORY include/${PROJECT_NAME}/
@@ -262,25 +254,13 @@ install(TARGETS simple_offboard clover_rc camera_markers vpe_publisher clover_le
 #   DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
 # )

-catkin_install_python(PROGRAMS src/selfcheck.py
-  DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
-)
-
-install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
-install(DIRECTORY examples DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
-install(DIRECTORY www DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
-# TODO: install www
-
 # Only install udev rules when building a Debian package
 # FIXME: Other operating systems may have other prefixes
 string(FIND ${CMAKE_INSTALL_PREFIX} "/opt/ros" _PREFIX_INDEX)
 if (${_PREFIX_INDEX} EQUAL 0)
  message(STATUS "Building as a Debian package - adding udev rules as installable files")
  install(FILES
-    udev/99-px4fmu.rules
+    config/99-px4fmu.rules
    DESTINATION /lib/udev/rules.d
  )
 else()
--- a/clover/README.md
+++ b/clover/README.md
@@ -4,7 +4,7 @@ A bundle for autonomous navigation and drone control.

 ## Manual installation

-Install ROS Noetic according to the [documentation](http://wiki.ros.org/noetic/Installation), then [create a Catkin workspace](http://wiki.ros.org/catkin/Tutorials/create_a_workspace).
+Install ROS Melodic according to the [documentation](http://wiki.ros.org/melodic/Installation), then [create a Catkin workspace](http://wiki.ros.org/catkin/Tutorials/create_a_workspace).

 Clone this repo to directory `~/catkin_ws/src/clover`:

@@ -36,7 +36,7 @@ curl https://raw.githubusercontent.com/mavlink/mavros/master/mavros/scripts/inst
 You may optionally install udev rules to provide `/dev/px4fmu` symlink to your PX4-based flight controller connected over USB. Copy `99-px4fmu.rules` to your `/lib/udev/rules.d` folder:

 ```bash
-cd ~/catkin_ws/src/clover/clover/udev
+cd ~/catkin_ws/src/clover/clover/config
 sudo cp 99-px4fmu.rules /lib/udev/rules.d
 ```

--- a/clover/config/99-px4fmu.rules
+++ b/clover/config/99-px4fmu.rules
--- a/clover/examples/get_telemetry.py
+++ b/clover/examples/get_telemetry.py
@@ -1,11 +0,0 @@
-# Information: https://clover.coex.tech/en/simple_offboard.html#gettelemetry
-
-import rospy
-from clover import srv
-
-rospy.init_node('flight')
-
-get_telemetry = rospy.ServiceProxy('get_telemetry', srv.GetTelemetry)
-
-# Print drone's state
-print(get_telemetry())
--- a/clover/examples/gps.py
+++ b/clover/examples/gps.py
@@ -1,47 +0,0 @@
-# Information: https://clover.coex.tech/en/simple_offboard.html#navigateglobal
-
-import rospy
-from clover import srv
-from std_srvs.srv import Trigger
-import math
-
-rospy.init_node('flight')
-
-get_telemetry = rospy.ServiceProxy('get_telemetry', srv.GetTelemetry)
-navigate = rospy.ServiceProxy('navigate', srv.Navigate)
-navigate_global = rospy.ServiceProxy('navigate_global', srv.NavigateGlobal)
-set_position = rospy.ServiceProxy('set_position', srv.SetPosition)
-set_velocity = rospy.ServiceProxy('set_velocity', srv.SetVelocity)
-set_attitude = rospy.ServiceProxy('set_attitude', srv.SetAttitude)
-set_rates = rospy.ServiceProxy('set_rates', srv.SetRates)
-land = rospy.ServiceProxy('land', Trigger)
-
-# https://clover.coex.tech/en/snippets.html#wait_arrival
-def wait_arrival(tolerance=0.2):
-    while not rospy.is_shutdown():
-        telem = get_telemetry(frame_id='navigate_target')
-        if math.sqrt(telem.x ** 2 + telem.y ** 2 + telem.z ** 2) < tolerance:
-            break
-        rospy.sleep(0.2)
-
-start = get_telemetry()
-
-if math.isnan(start.lat):
-    raise Exception('No global position, install and configure GPS sensor: https://clover.coex.tech/gps')
-
-print('Start point global position: lat={}, lon={}'.format(start.lat, start.lon))
-
-print('Take off 3 meters')
-navigate(x=0, y=0, z=3, frame_id='body', auto_arm=True)
-wait_arrival()
-
-print('Fly 1 arcsecond to the North (approx. 30 meters)')
-navigate_global(lat=start.lat+1.0/60/60, lon=start.lon, z=start.z+3, yaw=math.inf, speed=5)
-wait_arrival()
-
-print('Fly to home position')
-navigate_global(lat=start.lat, lon=start.lon, z=start.z+3, yaw=math.inf, speed=5)
-wait_arrival()
-
-print('Land')
-land()
--- a/clover/launch/aruco.launch
+++ b/clover/launch/aruco.launch
@@ -2,37 +2,30 @@
    <arg name="aruco_detect" default="true"/>
    <arg name="aruco_map" default="false"/>
    <arg name="aruco_vpe" default="false"/>
-    <arg name="placement" default="floor"/> <!-- markers placement: floor, ceiling, unknown -->
-    <arg name="length" default="0.22"/> <!-- not-in-map markers length, m -->
-    <arg name="map" default="map.txt"/> <!-- markers map file name -->

    <!-- For additional help go to https://clover.coex.tech/aruco -->

    <!-- aruco_detect: detect aruco markers, estimate poses -->
-    <node name="aruco_detect" pkg="nodelet" if="$(arg aruco_detect)" type="nodelet" args="load aruco_pose/aruco_detect main_camera_nodelet_manager" output="screen" clear_params="true" respawn="true">
+    <node name="aruco_detect" pkg="nodelet" if="$(arg aruco_detect)" type="nodelet" args="load aruco_pose/aruco_detect nodelet_manager" output="screen" clear_params="true">
        <remap from="image_raw" to="main_camera/image_raw"/>
        <remap from="camera_info" to="main_camera/camera_info"/>
-        <remap from="map_markers" to="aruco_map/markers"/>
+        <remap from="map_markers" to="aruco_map/markers" if="$(arg aruco_map)"/>
        <param name="estimate_poses" value="true"/>
        <param name="send_tf" value="true"/>
-        <param name="known_tilt" value="map" if="$(eval placement == 'floor')"/>
-        <param name="known_tilt" value="map_flipped" if="$(eval placement == 'ceiling')"/>
-        <param name="length" value="$(arg length)"/>
+        <param name="known_tilt" value="map"/>
+        <param name="length" value="0.33"/>
        <!-- aruco detector parameters -->
        <param name="cornerRefinementMethod" value="2"/> <!-- contour refinement -->
        <param name="minMarkerPerimeterRate" value="0.075"/> <!-- 0.075 for 320x240, 0.0375 for 640x480 -->
-        <!-- length override example: -->
-        <!-- <param name="length_override/3" value="0.1"/> -->
    </node>

    <!-- aruco_map: estimate aruco map pose -->
-    <node name="aruco_map" pkg="nodelet" type="nodelet" if="$(arg aruco_map)" args="load aruco_pose/aruco_map main_camera_nodelet_manager" output="screen" clear_params="true" respawn="true">
+    <node name="aruco_map" pkg="nodelet" type="nodelet" if="$(arg aruco_map)" args="load aruco_pose/aruco_map nodelet_manager" output="screen" clear_params="true">
        <remap from="image_raw" to="main_camera/image_raw"/>
        <remap from="camera_info" to="main_camera/camera_info"/>
        <remap from="markers" to="aruco_detect/markers"/>
-        <param name="map" value="$(find aruco_pose)/map/$(arg map)"/>
-        <param name="known_tilt" value="map" if="$(eval placement == 'floor')"/>
-        <param name="known_tilt" value="map_flipped" if="$(eval placement == 'ceiling')"/>
+        <param name="map" value="$(find aruco_pose)/map/map.txt"/>
+        <param name="known_tilt" value="map"/>
        <param name="image_axis" value="true"/>
        <param name="frame_id" value="aruco_map_detected" if="$(arg aruco_vpe)"/>
        <param name="frame_id" value="aruco_map" unless="$(arg aruco_vpe)"/>
--- a/clover/launch/clover.launch
+++ b/clover/launch/clover.launch
@@ -11,7 +11,8 @@
    <arg name="rangefinder_vl53l1x" default="true"/>
    <arg name="led" default="true"/>
    <arg name="blocks" default="false"/>
-    <arg name="rc" default="false"/>
+    <arg name="rc" default="true"/>
+    <arg name="shell" default="true"/>

    <arg name="simulator" default="false"/> <!-- flag that we are operating on a simulated drone -->

@@ -36,13 +37,18 @@
    <include file="$(find clover)/launch/aruco.launch" if="$(arg aruco)"/>

    <!-- optical flow -->
-    <node pkg="nodelet" type="nodelet" name="optical_flow" args="load clover/optical_flow main_camera_nodelet_manager" if="$(arg optical_flow)" clear_params="true" output="screen" respawn="true">
+    <node pkg="nodelet" type="nodelet" name="optical_flow" args="load clover/optical_flow nodelet_manager" if="$(arg optical_flow)" clear_params="true" output="screen">
        <remap from="image_raw" to="main_camera/image_raw"/>
        <remap from="camera_info" to="main_camera/camera_info"/>
        <param name="calc_flow_gyro" value="true"/>
        <param name="roi_rad" value="0.8"/>
    </node>

+    <!-- main nodelet manager -->
+    <node pkg="nodelet" type="nodelet" name="nodelet_manager" args="manager" output="screen" clear_params="true">
+        <param name="num_worker_threads" value="2"/>
+    </node>
+
    <node pkg="tf2_ros" type="static_transform_publisher" name="map_flipped_frame" args="0 0 0 3.1415926 3.1415926 0 map map_flipped"/>

    <!-- simplified offboard control -->
@@ -85,6 +91,9 @@
        <param name="use_fake_gcs" value="false"/>
    </node>

+    <!-- Shell access through ROS service -->
+    <node name="shell" pkg="clover" type="shell" output="screen" if="$(arg shell)"/>
+
    <!-- Update static directory -->
    <node pkg="roswww_static" name="roswww_static" type="main.py" clear_params="true">
        <param name="default_package" value="clover"/>
--- a/clover/launch/led.launch
+++ b/clover/launch/led.launch
@@ -36,7 +36,7 @@
            posctl: { r: 50, g: 100, b: 220 }
            offboard: { r: 220, g: 20, b: 250 }
            low_battery: { threshold: 3.6, effect: blink_fast, r: 255, g: 0, b: 0 }
-            error: { effect: flash, r: 255, g: 0, b: 0, ignore: [ "[lpe] vision position timeout" ]}
+            error: { effect: flash, r: 255, g: 0, b: 0 }
        </rosparam>
    </node>
 </launch>
--- a/clover/launch/main_camera.launch
+++ b/clover/launch/main_camera.launch
@@ -3,7 +3,6 @@

    <arg name="direction_z" default="down"/> <!-- direction the camera points: down, up -->
    <arg name="direction_y" default="backward"/> <!-- direction the camera cable points: backward, forward -->
-    <arg name="device" default="/dev/video0"/> <!-- v4l2 device -->
    <arg name="simulator" default="false"/>

    <node if="$(eval direction_z == 'down' and direction_y == 'backward')" pkg="tf2_ros" type="static_transform_publisher" name="main_camera_frame" args="0.05 0 -0.07 -1.5707963 0 3.1415926 base_link main_camera_optical"/>
@@ -18,14 +17,9 @@
    <!-- static_transform_publisher arguments: x y z yaw pitch roll frame_id child_frame_id -->
    <!-- <node pkg="tf2_ros" type="static_transform_publisher" name="main_camera_frame" args="0.05 0 -0.07 -1.5707963 0 3.1415926 base_link main_camera_optical"/> -->

-    <!-- camera nodelet manager -->
-    <node pkg="nodelet" type="nodelet" name="main_camera_nodelet_manager" args="manager" output="screen" clear_params="true" respawn="true">
-        <param name="num_worker_threads" value="2"/>
-    </node>
-
    <!-- camera node -->
-    <node pkg="nodelet" type="nodelet" name="main_camera" args="load cv_camera/CvCameraNodelet main_camera_nodelet_manager" launch-prefix="rosrun clover waitfile $(arg device)" clear_params="true" unless="$(arg simulator)" respawn="true">
-        <param name="device_path" value="$(arg device)"/>
+    <node pkg="nodelet" type="nodelet" name="main_camera" args="load cv_camera/CvCameraNodelet nodelet_manager" clear_params="true" unless="$(arg simulator)">
+        <param name="device_path" value="/dev/video0"/> <!-- v4l2 device -->
        <param name="frame_id" value="main_camera_optical"/>
        <param name="camera_info_url" value="file://$(find clover)/camera_info/fisheye_cam.yaml"/>

--- a/clover/launch/mavros.launch
+++ b/clover/launch/mavros.launch
@@ -6,16 +6,13 @@
    <arg name="viz" default="true"/>
    <arg name="respawn" default="true"/>
    <arg name="distance_sensor_remap" default="rangefinder/range"/>
-    <arg name="usb_device" default="/dev/px4fmu"/>
-    <arg name="prefix" default="" unless="$(eval fcu_conn == 'usb')"/>
-    <arg name="prefix" default="rosrun clover waitfile $(arg usb_device)" if="$(eval fcu_conn == 'usb')"/>

-    <node pkg="mavros" type="mavros_node" name="mavros" launch-prefix="$(arg prefix)" required="false" clear_params="true" respawn="$(arg respawn)" unless="$(eval fcu_conn == 'none')" respawn_delay="1" output="screen">
+    <node pkg="mavros" type="mavros_node" name="mavros" required="false" clear_params="true" respawn="$(arg respawn)" unless="$(eval fcu_conn == 'none')" respawn_delay="1" output="screen">
        <!-- UART connection -->
        <param name="fcu_url" value="/dev/ttyAMA0:921600" if="$(eval fcu_conn is None or fcu_conn == 'uart')"/>

        <!-- USB connection -->
-        <param name="fcu_url" value="$(arg usb_device)" if="$(eval fcu_conn == 'usb')"/>
+        <param name="fcu_url" value="/dev/px4fmu" if="$(eval fcu_conn == 'usb')"/>

        <!-- sitl before PX4 1.9.0 -->
        <param name="fcu_url" value="udp://@$(arg fcu_ip):14557" if="$(eval fcu_conn == 'udp')"/>
--- a/clover/package.xml
+++ b/clover/package.xml
@@ -1,5 +1,5 @@
 <?xml version="1.0"?>
-<package format="3">
+<package format="2">
  <name>clover</name>
  <version>0.21.1</version>
  <description>The Clover package</description>
@@ -37,8 +37,7 @@
  <depend>rosbridge_server</depend>
  <depend>web_video_server</depend>
  <depend>tf2_web_republisher</depend>
-  <depend condition="$ROS_PYTHON_VERSION == 2">python-lxml</depend>
-  <depend condition="$ROS_PYTHON_VERSION == 3">python3-lxml</depend>
+  <depend>python-lxml</depend>
  <exec_depend>python-pymavlink</exec_depend>
  <!-- Use test_depend for packages you need only for testing: -->
  <!--   <test_depend>gtest</test_depend> -->
--- a/clover/src/led.cpp
+++ b/clover/src/led.cpp
@@ -12,7 +12,6 @@

 #include <ros/ros.h>
 #include <string>
-#include <vector>
 #include <boost/algorithm/string.hpp>

 #include <clover/SetLEDEffect.h>
@@ -30,7 +29,6 @@ ros::Timer timer;
 ros::Time start_time;
 double blink_rate, blink_fast_rate, flash_delay, fade_period, wipe_period, rainbow_period;
 double low_battery_threshold;
-std::vector<std::string> error_ignore;
 bool blink_state;
 led_msgs::SetLEDs set_leds;
 led_msgs::LEDStateArray state, start_state;
@@ -276,10 +274,6 @@ void handleMavrosState(const mavros_msgs::State& msg)
 void handleLog(const rosgraph_msgs::Log& log)
 {
 	if (log.level >= rosgraph_msgs::Log::ERROR) {
-		// check if ignored
-		for (auto const& str : error_ignore) {
-			if (log.msg.find(str) != std::string::npos) return;
-		}
 		notify("error");
 	}
 }
@@ -308,7 +302,6 @@ int main(int argc, char **argv)
 	nh_priv.param("rainbow_period", rainbow_period, 5.0);

 	nh_priv.param("notify/low_battery/threshold", low_battery_threshold, 3.7);
-	nh_priv.param("notify/error/ignore", error_ignore, {});

 	ros::service::waitForService("set_leds"); // cannot work without set_leds service
 	set_leds_srv = nh.serviceClient<led_msgs::SetLEDs>("set_leds", true);
--- a/clover/src/optical_flow.cpp
+++ b/clover/src/optical_flow.cpp
@@ -70,17 +70,19 @@ private:
 		roi_rad_ = nh_priv.param("roi_rad", 0.0);
 		calc_flow_gyro_ = nh_priv.param("calc_flow_gyro", false);

+		img_sub_ = it.subscribeCamera("image_raw", 1, &OpticalFlow::flow, this);
 		img_pub_ = it_priv.advertise("debug", 1);
 		flow_pub_ = nh.advertise<mavros_msgs::OpticalFlowRad>("mavros/px4flow/raw/send", 1);
 		velo_pub_ = nh_priv.advertise<geometry_msgs::TwistStamped>("angular_velocity", 1);
 		shift_pub_ = nh_priv.advertise<geometry_msgs::Vector3Stamped>("shift", 1);

+		flow_.integrated_xgyro = NAN; // no IMU available
+		flow_.integrated_ygyro = NAN;
+		flow_.integrated_zgyro = NAN;
 		flow_.time_delta_distance_us = 0;
 		flow_.distance = -1; // no distance sensor available
 		flow_.temperature = 0;

-		img_sub_ = it.subscribeCamera("image_raw", 1, &OpticalFlow::flow, this);
-
 		NODELET_INFO("Optical Flow initialized");
 	}

@@ -150,7 +152,7 @@ private:
 			cv::Point2d shift = cv::phaseCorrelate(prev_, curr_, hann_, &response);

 			// Publish raw shift in pixels
-			geometry_msgs::Vector3Stamped shift_vec;
+			static geometry_msgs::Vector3Stamped shift_vec;
 			shift_vec.header.stamp = msg->header.stamp;
 			shift_vec.header.frame_id = msg->header.frame_id;
 			shift_vec.vector.x = shift.x;
@@ -176,8 +178,8 @@ private:
 			double flow_x = atan2(points_undist[0].x, focal_length_x);
 			double flow_y = atan2(points_undist[0].y, focal_length_y);

-			// Convert to FCU frame
-			geometry_msgs::Vector3Stamped flow_camera, flow_fcu;
+			// // Convert to FCU frame
+			static geometry_msgs::Vector3Stamped flow_camera, flow_fcu;
 			flow_camera.header.frame_id = msg->header.frame_id;
 			flow_camera.header.stamp = msg->header.stamp;
 			flow_camera.vector.x = flow_y; // +y means counter-clockwise rotation around Y axis
@@ -193,21 +195,18 @@ private:
 			ros::Duration integration_time = msg->header.stamp - prev_stamp_;
 			uint32_t integration_time_us = integration_time.toSec() * 1.0e6;

-			// Calculate flow gyro
-			flow_.integrated_xgyro = NAN;
-			flow_.integrated_ygyro = NAN;
-			flow_.integrated_zgyro = NAN;
-
 			if (calc_flow_gyro_) {
 				try {
 					auto flow_gyro_camera = calcFlowGyro(msg->header.frame_id, prev_stamp_, msg->header.stamp);
-					geometry_msgs::Vector3Stamped flow_gyro_fcu;
+					static geometry_msgs::Vector3Stamped flow_gyro_fcu;
 					tf_buffer_->transform(flow_gyro_camera, flow_gyro_fcu, fcu_frame_id_);
 					flow_.integrated_xgyro = flow_gyro_fcu.vector.x;
 					flow_.integrated_ygyro = flow_gyro_fcu.vector.y;
 					flow_.integrated_zgyro = flow_gyro_fcu.vector.z;
 				} catch (const tf2::TransformException& e) {
-					// Transform not available, keep NANs in flow gyro
+					// Invalidate previous frame
+					prev_.release();
+					return;
 				}
 			}

@@ -219,10 +218,6 @@ private:
 			flow_.quality = (uint8_t)(response * 255);
 			flow_pub_.publish(flow_);

-			prev_ = curr_.clone();
-			prev_stamp_ = msg->header.stamp;
-
-publish_debug:
 			// Publish debug image
 			if (img_pub_.getNumSubscribers() > 0) {
 				// publish debug image
@@ -236,12 +231,15 @@ publish_debug:
 			}

 			// Publish estimated angular velocity
-			geometry_msgs::TwistStamped velo;
+			static geometry_msgs::TwistStamped velo;
 			velo.header.stamp = msg->header.stamp;
 			velo.header.frame_id = fcu_frame_id_;
-			velo.twist.angular.x = flow_fcu.vector.x / integration_time.toSec();
-			velo.twist.angular.y = flow_fcu.vector.y / integration_time.toSec();
+			velo.twist.angular.x = flow_.integrated_x / integration_time.toSec();
+			velo.twist.angular.y = flow_.integrated_y / integration_time.toSec();
 			velo_pub_.publish(velo);
+
+			prev_ = curr_.clone();
+			prev_stamp_ = msg->header.stamp;
 		}
 	}

--- a/clover/src/selfcheck.py
+++ b/clover/src/selfcheck.py
@@ -138,7 +138,7 @@ def mavlink_exec(cmd, timeout=3.0):
        timeout=3,
        baudrate=0,
        count=len(cmd),
-        data=[ord(c) for c in cmd.ljust(70, '\0')])
+        data=map(ord, cmd.ljust(70, '\0')))
    msg.pack(link)
    ros_msg = mavlink.convert_to_rosmsg(msg)
    mavlink_pub.publish(ros_msg)
@@ -609,7 +609,7 @@ def check_rangefinder():

@check('Boot duration')
 def check_boot_duration():
-    output = subprocess.check_output('systemd-analyze').decode()
+    output = subprocess.check_output('systemd-analyze')
    r = re.compile(r'([\d\.]+)s\s*$', flags=re.MULTILINE)
    duration = float(r.search(output).groups()[0])
    if duration > 15:
@@ -620,7 +620,7 @@ def check_boot_duration():
 def check_cpu_usage():
    WHITELIST = 'nodelet',
    CMD = "top -n 1 -b -i | tail -n +8 | awk '{ printf(\"%-8s\\t%-8s\\t%-8s\\n\", $1, $9, $12); }'"
-    output = subprocess.check_output(CMD, shell=True).decode()
+    output = subprocess.check_output(CMD, shell=True)
    processes = output.split('\n')
    for process in processes:
        if not process:
@@ -636,7 +636,7 @@ def check_cpu_usage():
 def check_clover_service():
    try:
        output = subprocess.check_output('systemctl show -p ActiveState --value clover.service'.split(),
-                                         stderr=subprocess.STDOUT).decode()
+                                         stderr=subprocess.STDOUT)
    except subprocess.CalledProcessError as e:
        failure('systemctl returned %s: %s', e.returncode, e.output)
        return
@@ -751,7 +751,7 @@ def check_rpi_health():
        # <parameter>=<value>
        # In case of `get_throttled`, <value> is a hexadecimal number
        # with some of the FLAGs OR'ed together
-        output = subprocess.check_output(['vcgencmd', 'get_throttled']).decode()
+        output = subprocess.check_output(['vcgencmd', 'get_throttled'])
    except OSError:
        failure('could not call vcgencmd binary; not a Raspberry Pi?')
        return
--- a/clover/src/simple_offboard.cpp
+++ b/clover/src/simple_offboard.cpp
@@ -183,7 +183,7 @@ inline bool waitTransform(const string& target, const string& source,
 	}
 }

-#define TIMEOUT(msg, timeout) (msg.header.stamp.isZero() || (ros::Time::now() - msg.header.stamp > timeout))
+#define TIMEOUT(msg, timeout) (ros::Time::now() - msg.header.stamp > timeout)

 bool getTelemetry(GetTelemetry::Request& req, GetTelemetry::Response& res)
 {
@@ -441,10 +441,6 @@ void publish(const ros::Time stamp)

 		// publish setpoint frame
 		if (!setpoint.child_frame_id.empty()) {
-			if (setpoint.header.stamp == position_msg.header.stamp) {
-				return; // avoid TF_REPEATED_DATA warnings
-			}
-
 			setpoint.transform.translation.x = position_msg.pose.position.x;
 			setpoint.transform.translation.y = position_msg.pose.position.y;
 			setpoint.transform.translation.z = position_msg.pose.position.z;
@@ -716,7 +712,7 @@ bool serve(enum setpoint_type_t sp_type, float x, float y, float z, float vx, fl
 		}

 		if (sp_type == VELOCITY) {
-			Vector3Stamped vel;
+			static Vector3Stamped vel;
 			vel.header.frame_id = frame_id;
 			vel.header.stamp = stamp;
 			vel.vector.x = vx;
--- a/clover/src/vpe_publisher.cpp
+++ b/clover/src/vpe_publisher.cpp
@@ -53,7 +53,7 @@ void publishZero(const ros::TimerEvent& e)
 	}

 	ROS_INFO_THROTTLE(10, "publish zero");
-	geometry_msgs::PoseStamped zero;
+	static geometry_msgs::PoseStamped zero;
 	zero.header.frame_id = local_frame_id;
 	zero.header.stamp = e.current_real;
 	zero.pose.orientation.w = 1;
--- a/clover/src/waitfile
+++ b/clover/src/waitfile
@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-
-# $ ./waitfile <file> <command> <args...> 
-# wait until <file> appears and then invoke <command> with <args>
-
-echo "wait for file $1"
-while [ ! -e "$1" ]; do sleep 1; done;
-echo "file $1 appeared"
-exec "${@:2}"
--- a/clover/test/basic.py
+++ b/clover/test/basic.py
@@ -26,10 +26,21 @@ def test_simple_offboard_services_available():
    rospy.wait_for_service('land', timeout=5)

 def test_web_video_server(node):
-    try:
-        # Python 2
-        import urllib2 as urllib
-    except ModuleNotFoundError:
-        # Python 3
-        import urllib.request as urllib
-    urllib.urlopen("http://localhost:8080").read()
+    import urllib2
+    urllib2.urlopen("http://localhost:8080").read()
+
+def test_shell(node):
+    execute = rospy.ServiceProxy('exec', srv.Execute)
+    execute.wait_for_service(5)
+
+    res = execute(cmd='echo foo')
+    assert res.code == 0
+    assert res.output == 'foo\n'
+
+    res = execute(cmd='foo')
+    assert res.code == 32512
+    assert res.output == ''
+
+    res = execute(cmd='ls foo')
+    assert res.code == 512
+    assert res.output == ''
--- a/clover/www/clover.log
+++ b/clover/www/clover.log
@@ -1 +0,0 @@
-/var/log/clover.log
--- a/clover/www/clover_version
+++ b/clover/www/clover_version
@@ -1 +0,0 @@
-/etc/clover_version
--- a/clover/www/index.html
+++ b/clover/www/index.html
@@ -4,33 +4,24 @@

 <ul>
 	<li><a href="docs">View documentation</a> (snapshot of <a href="https://clover.coex.tech">clover.coex.tech</a>)</li>
-	<li><a href="topics.html">View topics</a></li>
 	<li><a href="" id="wvs">View image topics</a> (<code>web_video_server</code>)</li>
 	<li><a href="" id="butterfly">Open web terminal</a> (<code>Butterfly</code>)</li>
-	<li>View <a href="viz.html">View 3D visualization</a>, <a href="aruco_map.html">3D visualization for markers map</a> (<code>ros3djs</code>)</li>
+	<li><a href="viz.html">View 3D visualization</a> (<code>ros3djs</code>)</li>
+	<li><a href="aruco_map.html">3D visualization for markers map</a> (<code>ros3djs</code>)</li>
 	<li><a href="../clover_blocks/">Blocks programming</a> (<code>Blockly</code>)</li>
-	<li><a href="clover.log">Clover console</a> (<code>/var/log/clover.log</code>)</li>
 </ul>

 <div class="version"></div>

+<script src="js/roslib.js"></script>
 <script type="text/javascript">
 	document.querySelector("#wvs").href = location.protocol + '//' + location.hostname + ':8080';
 	document.querySelector("#butterfly").href = location.protocol + '//' + location.hostname + ':57575';

-	document.querySelector("#butterfly").addEventListener('click', function(e) {
-		if (location.hostname == 'localhost' || location.hostname == '127.0.0.1') {
-			if (!confirm('Please use regular Terminal app on a local machine.\nClick OK to proceed to Butterfly anyway.')) {
-				e.preventDefault();
-			}
-		}
-	});
-
 	// Determine image version
-	fetch('clover_version').then(function(response) {
-		if (response.status !== 200) return;
-		response.text().then(function(text) {
-			document.querySelector('.version').innerHTML = 'Version: ' + text;
-		});
+	var ros = new ROSLIB.Ros({ url: 'ws://' + location.hostname + ':9090' });
+	var exec = new ROSLIB.Service({ ros: ros, name : '/exec', serviceType : 'clover/Execute' });
+	exec.callService(new ROSLIB.ServiceRequest({ cmd: 'cat /etc/clover_version' }), function(result) {
+		document.querySelector('.version').innerHTML = 'Version: ' + result.output;
 	});
 </script>
--- a/clover/www/js/json-to-pretty-yaml.js
+++ b/clover/www/js/json-to-pretty-yaml.js
@@ -1,236 +0,0 @@
-// Browserified https://www.npmjs.com/package/json-to-pretty-yaml module
-
-(function(){function r(e,n,t){function o(i,f){if(!n[i]){if(!e[i]){var c="function"==typeof require&&require;if(!f&&c)return c(i,!0);if(u)return u(i,!0);var a=new Error("Cannot find module '"+i+"'");throw a.code="MODULE_NOT_FOUND",a}var p=n[i]={exports:{}};e[i][0].call(p.exports,function(r){var n=e[i][1][r];return o(n||r)},p,p.exports,r,e,n,t)}return n[i].exports}for(var u="function"==typeof require&&require,i=0;i<t.length;i++)o(t[i]);return o}return r})()({1:[function(require,module,exports){
-(function() {
-    "use strict";
-
-    var typeOf = require('remedial').typeOf;
-    var trimWhitespace = require('remove-trailing-spaces');
-
-    function stringify(data) {
-        var handlers, indentLevel = '';
-
-        handlers = {
-            "undefined": function() {
-                // objects will not have `undefined` converted to `null`
-                // as this may have unintended consequences
-                // For arrays, however, this behavior seems appropriate
-                return 'null';
-            },
-            "null": function() {
-                return 'null';
-            },
-            "number": function(x) {
-                return x;
-            },
-            "boolean": function(x) {
-                return x ? 'true' : 'false';
-            },
-            "string": function(x) {
-                // to avoid the string "true" being confused with the
-                // the literal `true`, we always wrap strings in quotes
-                return JSON.stringify(x);
-            },
-            "array": function(x) {
-                var output = '';
-
-                if (0 === x.length) {
-                    output += '[]';
-                    return output;
-                }
-
-                indentLevel = indentLevel.replace(/$/, '  ');
-                x.forEach(function(y, i) {
-                    // TODO how should `undefined` be handled?
-                    var handler = handlers[typeOf(y)];
-
-                    if (!handler) {
-                        throw new Error('what the crap: ' + typeOf(y));
-                    }
-
-                    output += '\n' + indentLevel + '- ' + handler(y, true);
-
-                });
-                indentLevel = indentLevel.replace(/  /, '');
-
-                return output;
-            },
-            "object": function(x, inArray, rootNode) {
-                var output = '';
-
-                if (0 === Object.keys(x).length) {
-                    output += '{}';
-                    return output;
-                }
-
-                if (!rootNode) {
-                    indentLevel = indentLevel.replace(/$/, '  ');
-                }
-
-                Object.keys(x).forEach(function(k, i) {
-                    var val = x[k],
-                        handler = handlers[typeOf(val)];
-
-                    if ('undefined' === typeof val) {
-                        // the user should do
-                        // delete obj.key
-                        // and not
-                        // obj.key = undefined
-                        // but we'll error on the side of caution
-                        return;
-                    }
-
-                    if (!handler) {
-                        throw new Error('what the crap: ' + typeOf(val));
-                    }
-
-                    if (!(inArray && i === 0)) {
-                        output += '\n' + indentLevel;
-                    }
-
-                    output += k + ': ' + handler(val);
-                });
-                indentLevel = indentLevel.replace(/  /, '');
-
-                return output;
-            },
-            "function": function() {
-                // TODO this should throw or otherwise be ignored
-                return '[object Function]';
-            }
-        };
-        return trimWhitespace(handlers[typeOf(data)](data, true, true) + '\n');
-
-    }
-
-    window.yamlStringify = stringify;
-    module.exports.stringify = stringify;
-}());
-
-},{"remedial":2,"remove-trailing-spaces":3}],2:[function(require,module,exports){
-/*jslint onevar: true, undef: true, nomen: true, eqeqeq: true, plusplus: true, bitwise: true, regexp: true, newcap: true, immed: true */
-(function () {
-    "use strict";
-
-    var global = Function('return this')()
-      , classes = "Boolean Number String Function Array Date RegExp Object".split(" ")
-      , i
-      , name
-      , class2type = {}
-      ;
-
-    for (i in classes) {
-      if (classes.hasOwnProperty(i)) {
-        name = classes[i];
-        class2type["[object " + name + "]"] = name.toLowerCase();
-      }
-    }
-
-    function typeOf(obj) {
-      return (null === obj || undefined === obj) ? String(obj) : class2type[Object.prototype.toString.call(obj)] || "object";
-    }
-
-    function isEmpty(o) {
-        var i, v;
-        if (typeOf(o) === 'object') {
-            for (i in o) { // fails jslint
-                v = o[i];
-                if (v !== undefined && typeOf(v) !== 'function') {
-                    return false;
-                }
-            }
-        }
-        return true;
-    }
-
-    if (!String.prototype.entityify) {
-        String.prototype.entityify = function () {
-            return this.replace(/&/g, "&amp;").replace(/</g,
-                "&lt;").replace(/>/g, "&gt;");
-        };
-    }
-
-    if (!String.prototype.quote) {
-        String.prototype.quote = function () {
-            var c, i, l = this.length, o = '"';
-            for (i = 0; i < l; i += 1) {
-                c = this.charAt(i);
-                if (c >= ' ') {
-                    if (c === '\\' || c === '"') {
-                        o += '\\';
-                    }
-                    o += c;
-                } else {
-                    switch (c) {
-                    case '\b':
-                        o += '\\b';
-                        break;
-                    case '\f':
-                        o += '\\f';
-                        break;
-                    case '\n':
-                        o += '\\n';
-                        break;
-                    case '\r':
-                        o += '\\r';
-                        break;
-                    case '\t':
-                        o += '\\t';
-                        break;
-                    default:
-                        c = c.charCodeAt();
-                        o += '\\u00' + Math.floor(c / 16).toString(16) +
-                            (c % 16).toString(16);
-                    }
-                }
-            }
-            return o + '"';
-        };
-    } 
-
-    if (!String.prototype.supplant) {
-        String.prototype.supplant = function (o) {
-            return this.replace(/{([^{}]*)}/g,
-                function (a, b) {
-                    var r = o[b];
-                    return typeof r === 'string' || typeof r === 'number' ? r : a;
-                }
-            );
-        };
-    }
-
-    if (!String.prototype.trim) {
-        String.prototype.trim = function () {
-            return this.replace(/^\s*(\S*(?:\s+\S+)*)\s*$/, "$1");
-        };
-    }
-
-    // CommonJS / npm / Ender.JS
-    module.exports = {
-        typeOf: typeOf,
-        isEmpty: isEmpty
-    };
-    global.typeOf = global.typeOf || typeOf;
-    global.isEmpty = global.isEmpty || isEmpty;
-}());
-
-},{}],3:[function(require,module,exports){
-"use strict";
-
-/**
- * removeTrailingSpaces
- * Remove the trailing spaces from a string.
- *
- * @name removeTrailingSpaces
- * @function
- * @param {String} input The input string.
- * @returns {String} The output string.
- */
-
-module.exports = function removeTrailingSpaces(input) {
-  // TODO If possible, use a regex
-  return input.split("\n").map(function (x) {
-    return x.trimRight();
-  }).join("\n");
-};
-},{}]},{},[1]);
--- a/clover/www/js/topics.js
+++ b/clover/www/js/topics.js
@@ -1,72 +0,0 @@
-const url = 'ws://' + location.hostname + ':9090';
-const ros = new ROSLIB.Ros({ url: url });
-
-ros.on('connection', function () {
-	document.body.classList.add('connected');
-	init();
-});
-
-ros.on('close', function () {
-	document.body.classList.remove('connected');
-	setTimeout(function() {
-		// reconnect
-		ros.connect(url);
-	}, 2000);
-});
-
-const title = document.querySelector('h1');
-const topicsList = document.querySelector('#topics');
-const topicMessage = document.querySelector('#topic-message');
-
-function viewTopicsList() {
-	title.innerHTML = 'Topics:';
-
-	ros.getTopics(function(topics) {
-		topicsList.innerHTML = topics.topics.map(function(topic, i) {
-			const type = topics.types[i];
-			if (type == 'sensor_msgs/Image') {
-				let url = `${location.protocol}//${location.hostname}:8080/stream_viewer?topic=${topic}`; 
-				return `<li><a href="${url}" class=topic title=${type}>${topic}</a> &#x1F5BC;</li>`;
-			} else {
-				return `<li><a href="?topic=${topic}" class=topic title=${type}>${topic}</a></li>`;
-			}
-		}).join('');
-	});
-}
-
-let rosdistro;
-
-function viewTopic(topic) {
-	title.innerHTML = topic;
-	topicMessage.style.display = 'block';
-
-	ros.getTopicType(topic, function(typeStr) {
-		const [pack, type] = typeStr.split('/');
-		let href = `https://docs.ros.org/en/${rosdistro}/api/${pack}/html/msg/${type}.html`;
-		title.innerHTML = `${topic} <a id="topic-type" href=${href} target="_blank">${typeStr}</a>`;
-	});
-
-	new ROSLIB.Topic({ ros: ros, name: topic }).subscribe(function(msg) {
-		document.title = topic;
-		if (mouseDown) return;
-		topicMessage.innerHTML = yamlStringify(msg); // JSON.stringify(msg, null, 4);
-	});
-}
-
-let mouseDown;
-
-topicMessage.addEventListener('mousedown', function() { mouseDown = true; });
-topicMessage.addEventListener('mouseup', function() { mouseDown = false; });
-
-function init() {
-	const params = Object.fromEntries(new URLSearchParams(window.location.search).entries());
-
-	if (!params.topic) {
-		viewTopicsList();
-	} else {
-		new ROSLIB.Param({ ros: ros, name: '/rosdistro'}).get(function(value) {
-			rosdistro = value.trim();
-			viewTopic(params.topic);
-		});
-	}
-}
--- a/clover/www/topics.html
+++ b/clover/www/topics.html
@@ -1,27 +0,0 @@
-<html lang="en">
-	<head>
-		<title>ROS topics</title>
-		<script src="js/roslib.js"></script>
-		<link rel="icon" href="data:,"> <!-- make chrome don't request icon -->
-		<script type="module" src="js/topics.js"></script>
-		<script src="js/json-to-pretty-yaml.js"></script>
-		<style>
-			#topics { line-height: 1.2em; }
-			#topic-view {
-				display: none;
-			}
-			#topic-message {
-				display: none;
-				white-space: pre;
-				font-family: monospace;
-			}
-			#topic-type { font-family: monospace; font-size: 0.5em; vertical-align: super; font-weight: normal; }
-			.topic { font-family: monospace; }
-		</style>
-	</head>
-	<body>
-		<h1>&nbsp;</h1>
-		<ul id="topics"></ul>
-		<code id="topic-message" title="Hold mouse button to pause">No messages received</code>
-	</body>
-</html>
--- a/clover_blocks/CMakeLists.txt
+++ b/clover_blocks/CMakeLists.txt
@@ -73,13 +73,6 @@ catkin_install_python(PROGRAMS src/clover_blocks
  DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
 )

-# TODO: store programs in home directory?
-install(DIRECTORY programs
-  DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION}
-)
-
-install(DIRECTORY www DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-
 #############
 ## Testing ##
 #############
--- a/clover_blocks/README.md
+++ b/clover_blocks/README.md
@@ -10,7 +10,7 @@ Internal package documentation is given below.

 ## Frontend

-The frontend files are located in [`www`](./www/) subdirectory. The frontend application uses [`roslib.js`](http://wiki.ros.org/roslibjs) library for communicating with backend node and other ROS resources.
+The frontend files are located in [`www`](./www/) subdirectory. The frontend application uses [`roblib.js`](http://wiki.ros.org/roslibjs) library for communicating with backend node and other ROS resources.

 ## `clover_blocks` node

@@ -30,8 +30,7 @@ The frontend files are located in [`www`](./www/) subdirectory. The frontend app
 Parameters read by frontend:

 * `~navigate_tolerance` (*float*) – distance tolerance in meters, used for navigate-like blocks (default: 0.2).
-* `~navigate_global_tolerance` (*float*) – distance tolerance for global coordinates navigation (default: 1).
-* `~yaw_tolerance` (*float*) – yaw angle tolerance in degrees, used in set_yaw block (default: 1).
+* `~yaw_tolerance` (*float*) – yaw angle tolerance in degrees, used in set_yaw block (default: 20).
 * `~sleep_time` (*float*) – duration of sleep in loop cycles, used for navigate-like blocks (default: 0.2).
 * `~confirm_run` (*bool*) – enable confirmation to run the program (default: true).

--- a/clover_blocks/src/clover_blocks
+++ b/clover_blocks/src/clover_blocks
@@ -11,8 +11,7 @@
 from __future__ import print_function

 import rospy
-import os, sys
-import traceback
+import os
 import threading
 import re
 import uuid
@@ -112,17 +111,12 @@ def run(req):
                'print': _print,
                'raw_input': _input}
            try:
-                exec(req.code, g)
+                exec req.code in g
            except Stop:
                rospy.loginfo('Program forced to stop')
            except Exception as e:
                rospy.logerr(str(e))
-                traceback.print_exc()
-                etype, value, tb = sys.exc_info()
-                fmt = traceback.format_exception(etype, value, tb)
-                fmt.pop(1) # remove 'clover_blocks' file frame
-                exc_info = ''.join(fmt)
-                error_pub.publish(str(e) + '\n\n' + exc_info)
+                error_pub.publish(str(e))

            rospy.loginfo('Program terminated')
            running_lock.release()
@@ -146,7 +140,6 @@ def stop(req):
    return {'success': True}


-# TODO: find dir in installed package
 programs_path = rospy.get_param('~programs_dir', os.path.dirname(os.path.abspath(__file__)) + '/../programs')


--- a/clover_blocks/www/blocks.js
+++ b/clover_blocks/www/blocks.js
@@ -31,14 +31,6 @@ function considerFrameId(e) {
 			this.getInput('Y').fieldRow[0].setValue('y');
 			this.getInput('Z').fieldRow[0].setValue('z');
 		}
-		if (this.getInput('LAT')) { // block has global coordinates
-			let global = frameId.startsWith('GLOBAL');
-			this.getInput('LAT').setVisible(global);
-			this.getInput('LON').setVisible(global);
-			this.getInput('X').setVisible(!global);
-			this.getInput('Y').setVisible(!global);
-			this.getInput('Z').fieldRow[0].setValue(frameId == 'GLOBAL' ? 'altitude' : 'z');
-		}
 	}
 	if (this.getInput('ID')) { // block has marker id field
 		this.getInput('ID').setVisible(frameId == 'ARUCO'); // toggle id field
@@ -73,9 +65,6 @@ function updateSetpointBlock(e) {

 Blockly.Blocks['navigate'] = {
 	init: function () {
-		let navFrameId = frameIds.slice();
-		navFrameId.push(['global', 'GLOBAL_LOCAL'])
-		navFrameId.push(['global, WGS 84 alt.', 'GLOBAL'])
 		this.appendDummyInput()
 			.appendField("navigate to point");
 		this.appendValueInput("X")
@@ -84,20 +73,12 @@ Blockly.Blocks['navigate'] = {
 		this.appendValueInput("Y")
 			.setCheck("Number")
 			.appendField("left");
-		this.appendValueInput("LAT")
-			.setCheck("Number")
-			.appendField("latitude")
-			.setVisible(false);
-		this.appendValueInput("LON")
-			.setCheck("Number")
-			.appendField("longitude")
-			.setVisible(false)
 		this.appendValueInput("Z")
 			.setCheck("Number")
 			.appendField("up");
 		this.appendDummyInput()
 			.appendField("relative to")
-			.appendField(new Blockly.FieldDropdown(navFrameId), "FRAME_ID");
+			.appendField(new Blockly.FieldDropdown(frameIds), "FRAME_ID");
 		this.appendValueInput("ID")
 			.setCheck("Number")
 			.appendField("with ID")
@@ -287,7 +268,7 @@ Blockly.Blocks['mode'] = {
 			.appendField("current flight mode");
 		this.setOutput(true, "String");
 		this.setColour(COLOR_STATE);
-		this.setTooltip("Returns current flight mode (POSCTL, OFFBOARD, etc).");
+		this.setTooltip("");
 		this.setHelpUrl(DOCS_URL + '#' + this.type);
 	}
 };
@@ -394,7 +375,7 @@ Blockly.Blocks['take_off'] = {
 		this.setPreviousStatement(true, null);
 		this.setNextStatement(true, null);
 		this.setColour(COLOR_FLIGHT);
-		this.setTooltip("Take off on desired altitude in meters.");
+		this.setTooltip("Take off on desired altitude in meters");
 		this.setHelpUrl(DOCS_URL + '#' + this.type);
 	}
 };
@@ -410,7 +391,7 @@ Blockly.Blocks['land'] = {
 		this.setPreviousStatement(true, null);
 		this.setNextStatement(true, null);
 		this.setColour(COLOR_FLIGHT);
-		this.setTooltip("Land the drone.");
+		this.setTooltip("");
 		this.setHelpUrl(DOCS_URL + '#' + this.type);
 	}
 };
@@ -419,10 +400,10 @@ Blockly.Blocks['global_position'] = {
 	init: function () {
 		this.appendDummyInput()
 			.appendField("current")
-			.appendField(new Blockly.FieldDropdown([["latitude", "LAT"], ["longitude", "LON"], ["altitude", "ALT"]]), "FIELD");
+			.appendField(new Blockly.FieldDropdown([["latitude", "LATITUDE"], ["longitude", "LONGITUDE"], ["altitude", "ALTITUDE"]]), "NAME");
 		this.setOutput(true, "Number");
-		this.setColour(COLOR_STATE);
-		this.setTooltip("Returns current global position (latitude, longitude, altitude above the WGS 84 ellipsoid).");
+		this.setColour(230);
+		this.setTooltip("");
 		this.setHelpUrl(DOCS_URL + '#' + this.type);
 	}
 };
--- a/clover_blocks/www/index.html
+++ b/clover_blocks/www/index.html
@@ -52,8 +52,6 @@
 				<value name="X"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
 				<value name="Y"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
 				<value name="Z"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
-				<value name="LAT"><shadow type="math_number"><field name="NUM">47.397503</field></shadow></value>
-				<value name="LON"><shadow type="math_number"><field name="NUM">8.544945</field></shadow></value>
 				<value name="SPEED"><shadow type="math_number"><field name="NUM">0.5</field></shadow></value>
 				<value name="ID"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
 			</block>
@@ -87,7 +85,6 @@
 				<value name="ID"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
 			</block>
 			<block type="get_attitude"></block>
-			<block type="global_position"></block>
 			<block type="distance">
 				<value name="X"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
 				<value name="Y"><shadow type="math_number"><field name="NUM">0</field></shadow></value>
--- a/clover_blocks/www/main.js
+++ b/clover_blocks/www/main.js
@@ -39,8 +39,7 @@ var workspace = Blockly.inject('blockly', {
 function readParams() {
 	return Promise.all([
 		ros.readParam('navigate_tolerance', true, 0.2),
-		ros.readParam('navigate_global_tolerance', true, 1),
-		ros.readParam('yaw_tolerance', true, 1),
+		ros.readParam('yaw_tolerance', true, 20),
 		ros.readParam('sleep_time', true, 0.2),
 		ros.readParam('confirm_run', true, true),
 	]);
--- a/clover_blocks/www/python.js
+++ b/clover_blocks/www/python.js
@@ -33,18 +33,6 @@ const NAVIGATE_WAIT = () => `\ndef navigate_wait(x=0, y=0, z=0, speed=0.5, frame
            return
        rospy.sleep(${params.sleep_time})\n`;

-const NAVIGATE_GLOBAL_WAIT = () => `\ndef navigate_global_wait(lat, lon, z, speed=0.5):
-    res = navigate_global(lat=lat, lon=lon, z=z, yaw=float('inf'), speed=speed)
-
-    if not res.success:
-        raise Exception(res.message)
-
-    while not rospy.is_shutdown():
-        telem = get_telemetry(frame_id='navigate_target')
-        if math.sqrt(telem.x ** 2 + telem.y ** 2 + telem.z ** 2) < ${params.navigate_global_tolerance}:
-            return
-        rospy.sleep(${params.sleep_time})\n`;
-
 const LAND_WAIT = () => `\ndef land_wait():
    land()
    while get_telemetry().armed:
@@ -80,9 +68,6 @@ function generateROSDefinitions() {
 	if (rosDefinitions.offboard) {
 		code += `get_telemetry = rospy.ServiceProxy('get_telemetry', srv.GetTelemetry)\n`;
 		code += `navigate = rospy.ServiceProxy('navigate', srv.Navigate)\n`;
-		if (rosDefinitions.navigateGlobal) {
-		code += `navigate_global = rospy.ServiceProxy('navigate_global', srv.NavigateGlobal)\n`;
-		}
 		if (rosDefinitions.setVelocity) {
 			code += `set_velocity = rospy.ServiceProxy('set_velocity', srv.SetVelocity)\n`;
 		}
@@ -109,10 +94,6 @@ function generateROSDefinitions() {
 		Blockly.Python.definitions_['import_math'] = 'import math';
 		code += NAVIGATE_WAIT();
 	}
-	if (rosDefinitions.navigateGlobalWait) {
-		Blockly.Python.definitions_['import_math'] = 'import math';
-		code += NAVIGATE_GLOBAL_WAIT();
-	}
 	if (rosDefinitions.landWait) {
 		code += LAND_WAIT();
 	}
@@ -180,48 +161,24 @@ Blockly.Python.navigate = function(block) {
 	let x = Blockly.Python.valueToCode(block, 'X', Blockly.Python.ORDER_NONE);
 	let y = Blockly.Python.valueToCode(block, 'Y', Blockly.Python.ORDER_NONE);
 	let z = Blockly.Python.valueToCode(block, 'Z', Blockly.Python.ORDER_NONE);
-	let lat = Blockly.Python.valueToCode(block, 'LAT', Blockly.Python.ORDER_NONE);
-	let lon = Blockly.Python.valueToCode(block, 'LON', Blockly.Python.ORDER_NONE);
-	let wait = block.getFieldValue('WAIT') == 'TRUE';
-	let frameId = block.getFieldValue('FRAME_ID');
+	let frameId = buildFrameId(block);
 	let speed = Blockly.Python.valueToCode(block, 'SPEED', Blockly.Python.ORDER_NONE);

+	let params = [`x=${x}`, `y=${y}`, `z=${z}`, `frame_id=${frameId}`, `speed=${speed}`];
+
 	simpleOffboard();

-	// global coordinates
-	if (frameId.startsWith('GLOBAL')) {
-		rosDefinitions.navigateGlobal = true;
+	if (block.getFieldValue('WAIT') == 'TRUE') {
+		rosDefinitions.navigateWait = true;
 		simpleOffboard();

-		if (frameId == 'GLOBAL') {
-			z = `${z} + get_telemetry().alt - get_telemetry().z`;
-		}
-
-		if (wait) {
-			rosDefinitions.navigateGlobalWait = true;
-			simpleOffboard();
-			return `navigate_global_wait(lat=${lat}, lon=${lon}, z=${z}, speed=${speed})\n`;
-
-		} else {
-			return `navigate_global(lat=${lat}, lon=${lon}, z=${z}, yaw=float('inf'), speed=${speed})\n`;
-		}
+		return `navigate_wait(${params.join(', ')})\n`;

 	} else {
-		frameId = buildFrameId(block);
-		let params = [`x=${x}`, `y=${y}`, `z=${z}`, `frame_id=${frameId}`, `speed=${speed}`];
-
-		if (wait) {
-			rosDefinitions.navigateWait = true;
-			simpleOffboard();
-
-			return `navigate_wait(${params.join(', ')})\n`;
-
-		} else {
-			if (frameId != 'body') {
-				params.push(`yaw=float('nan')`);
-			}
-			return `navigate(${params.join(', ')})\n`;
+		if (frameId != 'body') {
+			params.push(`yaw=float('nan')`);
 		}
+		return `navigate(${params.join(', ')})\n`;
 	}
 }

@@ -358,12 +315,6 @@ Blockly.Python.get_attitude = function(block) {
 	return [code, Blockly.Python.ORDER_FUNCTION_CALL];
 }

-Blockly.Python.global_position = function(block) {
-	simpleOffboard();
-	var code = `get_telemetry().${block.getFieldValue('FIELD').toLowerCase()}`;
-	return [code, Blockly.Python.ORDER_FUNCTION_CALL];
-}
-
 Blockly.Python.distance = function(block) {
 	rosDefinitions.distance = true;
 	simpleOffboard();
@@ -440,7 +391,7 @@ Blockly.Python.set_led = function(block) {

 	if (/^'(.*)'$/.test(colorCode)) { // is simple string
 		let color = parseColor(colorCode);
-		return `set_leds([LEDState(index=int(${index}), r=${color.r}, g=${color.g}, b=${color.b})])\n`; // TODO: check for simple int
+		return `set_leds([LEDState(index=${index}, r=${color.r}, g=${color.g}, b=${color.b})])\n`;
 	} else {
 		let parseColor = Blockly.Python.provideFunction_('parse_color', [PARSE_COLOR]);
 		return `set_leds([LEDState(index=${index}, **${parseColor}(${colorCode}))])\n`;
--- a/clover_description/README.md
+++ b/clover_description/README.md
@@ -14,7 +14,7 @@ You may provide additional parameters for `spawn_drone.launch` as well:
 * `rangefinder` (*boolean*, default: *true*) - controls whether the drone will have a downward-facing laser rangefinder attached;
 * `led` (*boolean*, default: *true*) - controls whether the drone will have a programmable LED strip (requires plugins from `clover_simulation`);
 * `gps` (*boolean*, default: *true*) - controls whether the drone will have a simulated GPS attached (requires plugins from `sitl_gazebo`);
-* `maintain_camera_rate` (*boolean*, default: *false*) - slow down the simulation to maintain camera publishing rate (internally changes the camera plugin from `libgazebo_ros_camera.so` to `libthrottling_camera.so` from [`clover_simulation`](../clover_simulation/README.md#throttling-camera-plugin-throttling_camera)).
+* `maintain_camera_rate` (*boolean*, default: *false*) - slow down the simultion to maintain camera publishing rate (internally changes the camera plugin from `libgazebo_ros_camera.so` to `libthrottling_camera.so` from [`clover_simulation`](../clover_simulation/README.md#throttling-camera-plugin-throttling_camera)).

 For example, in order to spawn a drone without a GPS module, you may use the following command:

--- a/clover_description/launch/view_drone.launch
+++ b/clover_description/launch/view_drone.launch
@@ -1,7 +1,7 @@
 <launch>
-  <arg name="model" default="$(find clover_description)/urdf/clover/clover4.xacro"/>
+  <arg name="model" default="$(find clover_description)/urdf/drones/clover4.xacro"/>

-  <param name="robot_description" command="xacro $(arg model)"/>
+  <param name="robot_description" command="$(find xacro)/xacro.py $(arg model)"/>

  <node name="rviz" pkg="rviz" type="rviz" required="true"/>
 </launch>
--- a/clover_description/urdf/clover/clover4.xacro
+++ b/clover_description/urdf/clover/clover4.xacro
@@ -1,5 +1,5 @@
 <?xml version="1.0"?>
-<robot name="clover" xmlns:xacro="http://ros.org/wiki/xacro">
+<robot name="clover_camera" xmlns:xacro="http://ros.org/wiki/xacro">

  <xacro:arg name="main_camera" default="true"/>
  <xacro:arg name="rangefinder" default="true"/>
@@ -8,10 +8,10 @@
  <xacro:arg name="maintain_camera_rate" default="false"/>
  <xacro:arg name="use_clover_physics" default="false"/>

-  <xacro:include filename="clover4_base.xacro" />
-  <xacro:include filename="../sensors/rpi_cam.urdf.xacro"/>
-  <xacro:include filename="../sensors/distance_sensor.urdf.xacro"/>
-  <xacro:include filename="../leds/led_strip.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/clover/clover4_base.xacro" />
+  <xacro:include filename="$(find clover_description)/urdf/sensors/rpi_cam.urdf.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/sensors/distance_sensor.urdf.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/leds/led_strip.xacro"/>

  <!-- Create camera plugin -->
  <xacro:if value="$(arg main_camera)">
@@ -36,17 +36,11 @@
  </xacro:if>

  <xacro:if value="$(arg gps)">
-    <gazebo>
-      <include>
-        <uri>model://gps</uri>
-        <pose>0.1 0 0 0 0 0</pose>
-        <name>gps0</name>
-      </include>
-      <joint name='gps0_joint' type='fixed'>
-        <child>gps0::link</child>
-        <parent>base_link</parent>
-      </joint>  
-    </gazebo>
+    <!-- Instantiate gps plugin. -->
+    <xacro:gps_plugin_macro
+      namespace="${namespace}"
+      gps_noise="true"
+      />
  </xacro:if>

 </robot>
--- a/clover_description/urdf/clover/clover4_base.xacro
+++ b/clover_description/urdf/clover/clover4_base.xacro
@@ -1,15 +1,40 @@
 <?xml version="1.0"?>

 <robot name="clover" xmlns:xacro="http://ros.org/wiki/xacro">
+  <!-- Properties that can be assigned at build time as arguments.
+  Is there a reason not to make all properties arguments?
+  -->
+  <xacro:arg name='name' default='iris' />
+  <xacro:arg name='mavlink_addr' default='INADDR_ANY' />
+  <xacro:arg name='mavlink_udp_port' default='14560' />
+  <xacro:arg name='mavlink_tcp_port' default='4560' />
+  <xacro:arg name='serial_enabled' default='false' />
+  <xacro:arg name='serial_device' default='/dev/ttyACM0' />
+  <xacro:arg name='baudrate' default='921600' />
+  <xacro:arg name='qgc_addr' default='INADDR_ANY' />
+  <xacro:arg name='qgc_udp_port' default='14550' />
+  <xacro:arg name='sdk_addr' default='INADDR_ANY' />
+  <xacro:arg name='sdk_udp_port' default='14540' />
+  <xacro:arg name='hil_mode' default='false' />
+  <xacro:arg name='hil_state_level' default='false' />
+  <xacro:arg name='send_vision_estimation' default='false' />
+  <xacro:arg name='send_odometry' default='false' />
+  <xacro:arg name='enable_lockstep' default='true' />
+  <xacro:arg name='use_tcp' default='true' />
+  <xacro:arg name='vehicle_is_tailsitter' default='false' />
+  <xacro:arg name='visual_material' default='DarkGrey' />
+  <xacro:arg name='enable_mavlink_interface' default='true' />
  <xacro:arg name='enable_wind' default='false' />
+  <!-- The following causes segfault with multiple vehicles if defaults to true!!! -->
+  <xacro:arg name='enable_ground_truth' default='false' />
  <xacro:arg name='enable_logging' default='false' />
-  <xacro:arg name='log_file' default='clover' />
+  <xacro:arg name='log_file' default='iris' />

  <!-- macros for gazebo plugins, sensors -->
-  <xacro:include filename="../component_snippets.urdf.xacro" />
+  <xacro:include filename="$(find clover_description)/urdf/component_snippets.urdf.xacro" />

  <!-- Instantiate iris "mechanics" -->
-  <xacro:include filename="clover4_physics.xacro" />
+  <xacro:include filename="$(find clover_description)/urdf/clover/clover4_physics.xacro" />

  <xacro:if value="$(arg enable_wind)">
    <xacro:wind_plugin_macro
@@ -24,8 +49,126 @@
        />
  </xacro:if>

-  <!-- Gazebo plugins -->
-  <xacro:include filename="$(find clover_description)/urdf/clover/clover4_gazebo.xacro" />
+  <!-- Instantiate magnetometer plugin. -->
+  <xacro:magnetometer_plugin_macro
+    namespace="${namespace}"
+    pub_rate="20"
+    noise_density="0.0004"
+    random_walk="0.0000064"
+    bias_correlation_time="600"
+    mag_topic="/mag"
+    >
+  </xacro:magnetometer_plugin_macro>
+
+  <!-- Instantiate barometer plugin. -->
+  <xacro:barometer_plugin_macro
+    namespace="${namespace}"
+    pub_rate="10"
+    baro_topic="/baro"
+    >
+  </xacro:barometer_plugin_macro>
+
+  <xacro:if value="$(arg enable_mavlink_interface)">
+  <!-- Instantiate mavlink telemetry interface. -->
+  <xacro:mavlink_interface_macro
+    namespace="${namespace}"
+    imu_sub_topic="/imu"
+    gps_sub_topic="/gps"
+    mag_sub_topic="/mag"
+    baro_sub_topic="/baro"
+    mavlink_addr="$(arg mavlink_addr)"
+    mavlink_udp_port="$(arg mavlink_udp_port)"
+    mavlink_tcp_port="$(arg mavlink_tcp_port)"
+    serial_enabled="$(arg serial_enabled)"
+    serial_device="$(arg serial_device)"
+    baudrate="$(arg baudrate)"
+    qgc_addr="$(arg qgc_addr)"
+    qgc_udp_port="$(arg qgc_udp_port)"
+    sdk_addr="$(arg sdk_addr)"
+    sdk_udp_port="$(arg sdk_udp_port)"
+    hil_mode="$(arg hil_mode)"
+    hil_state_level="$(arg hil_state_level)"
+    vehicle_is_tailsitter="$(arg vehicle_is_tailsitter)"
+    send_vision_estimation="$(arg send_vision_estimation)"
+    send_odometry="$(arg send_odometry)"
+    enable_lockstep="$(arg enable_lockstep)"
+    use_tcp="$(arg use_tcp)"
+    >
+  </xacro:mavlink_interface_macro>
+  </xacro:if>
+
+  <!-- Mount an ADIS16448 IMU. -->
+  <xacro:imu_plugin_macro
+    namespace="${namespace}"
+    imu_suffix=""
+    parent_link="base_link"
+    imu_topic="/imu"
+    mass_imu_sensor="0.015"
+    gyroscope_noise_density="0.0003394"
+    gyroscopoe_random_walk="0.000038785"
+    gyroscope_bias_correlation_time="1000.0"
+    gyroscope_turn_on_bias_sigma="0.0087"
+    accelerometer_noise_density="0.004"
+    accelerometer_random_walk="0.006"
+    accelerometer_bias_correlation_time="300.0"
+    accelerometer_turn_on_bias_sigma="0.1960"
+  >
+    <inertia ixx="0.00001" ixy="0.0" ixz="0.0" iyy="0.00001" iyz="0.0" izz="0.00001" />
+    <origin xyz="0 0 0" rpy="0 0 0" />
+  </xacro:imu_plugin_macro>
+
+  <xacro:if value="$(arg enable_ground_truth)">
+    <!-- Mount an IMU providing ground truth. -->
+    <xacro:imu_plugin_macro
+      namespace="${namespace}"
+      imu_suffix="gt"
+      parent_link="base_link"
+      imu_topic="ground_truth/imu"
+      mass_imu_sensor="0.00001"
+      gyroscope_noise_density="0.0"
+      gyroscopoe_random_walk="0.0"
+      gyroscope_bias_correlation_time="1000.0"
+      gyroscope_turn_on_bias_sigma="0.0"
+      accelerometer_noise_density="0.0"
+      accelerometer_random_walk="0.0"
+      accelerometer_bias_correlation_time="300.0"
+      accelerometer_turn_on_bias_sigma="0.0"
+    >
+      <inertia ixx="0.00001" ixy="0.0" ixz="0.0" iyy="0.00001" iyz="0.0" izz="0.00001" />
+      <origin xyz="0 0 0" rpy="0 0 0" />
+    </xacro:imu_plugin_macro>
+
+    <!-- Mount a generic odometry sensor providing ground truth. -->
+    <xacro:odometry_plugin_macro
+      namespace="${namespace}/ground_truth"
+      odometry_sensor_suffix="gt"
+      parent_link="base_link"
+      pose_topic="pose"
+      pose_with_covariance_topic="pose_with_covariance"
+      position_topic="position"
+      transform_topic="transform"
+      odometry_topic="odometry"
+      parent_frame_id="world"
+      mass_odometry_sensor="0.00001"
+      measurement_divisor="1"
+      measurement_delay="0"
+      unknown_delay="0.0"
+      noise_normal_position="0 0 0"
+      noise_normal_quaternion="0 0 0"
+      noise_normal_linear_velocity="0 0 0"
+      noise_normal_angular_velocity="0 0 0"
+      noise_uniform_position="0 0 0"
+      noise_uniform_quaternion="0 0 0"
+      noise_uniform_linear_velocity="0 0 0"
+      noise_uniform_angular_velocity="0 0 0"
+      enable_odometry_map="false"
+      odometry_map=""
+      image_scale=""
+    >
+      <inertia ixx="0.00001" ixy="0.0" ixz="0.0" iyy="0.00001" iyz="0.0" izz="0.00001" /> <!-- [kg.m^2] [kg.m^2] [kg.m^2] [kg.m^2] [kg.m^2] [kg.m^2] -->
+      <origin xyz="0.0 0.0 0.0" rpy="0.0 0.0 0.0" />
+    </xacro:odometry_plugin_macro>
+  </xacro:if>

  <xacro:if value="$(arg enable_logging)">
    <!-- Instantiate a logger -->
--- a/clover_description/urdf/clover/clover4_gazebo.xacro
+++ b/clover_description/urdf/clover/clover4_gazebo.xacro
@@ -1,183 +0,0 @@
-<?xml version="1.0"?>
-
-<!-- Reference: https://github.com/PX4/PX4-SITL_gazebo/blob/7505aee97d2d3112fb2bd95198946345c6fa0b07/models/iris/iris.sdf.jinja#L430 -->
-
-<robot xmlns:xacro="http://ros.org/wiki/xacro">
-
-  <!-- IMU link -->
-  <link name="/imu_link">
-    <inertial>
-      <inertia ixx="0.00001" ixy="0.0" ixz="0.0" iyy="0.00001" iyz="0.0" izz="0.00001"/>
-      <mass value="0.015"/>
-      <!-- [kg] -->
-      <origin rpy="0 0 0" xyz="0 0 0"/>
-    </inertial>
-  </link>
-
-  <!-- IMU joint -->
-  <joint name="/imu_joint" type="fixed">
-    <origin rpy="0 0 0" xyz="0 0 0"/>
-    <parent link="base_link"/>
-    <child link="/imu_link"/>
-    <!-- <limit upper="0" lower="0" effort="0" velocity="0" /> -->
-  </joint>
-
-  <gazebo reference="/imu_joint">
-    <disableFixedJointLumping>true</disableFixedJointLumping>
-    <preserveFixedJoint>true</preserveFixedJoint>
-  </gazebo>
-
-  <gazebo>
-    <plugin name='groundtruth_plugin' filename='libgazebo_groundtruth_plugin.so'>
-      <robotNamespace/>
-    </plugin>
-    <plugin name='magnetometer_plugin' filename='libgazebo_magnetometer_plugin.so'>
-      <robotNamespace/>
-      <pubRate>100</pubRate>
-      <noiseDensity>0.0004</noiseDensity>
-      <randomWalk>6.4e-06</randomWalk>
-      <biasCorrelationTime>600</biasCorrelationTime>
-      <magTopic>/mag</magTopic>
-    </plugin>
-    <plugin name='barometer_plugin' filename='libgazebo_barometer_plugin.so'>
-      <robotNamespace/>
-      <pubRate>50</pubRate>
-      <baroTopic>/baro</baroTopic>
-      <baroDriftPaPerSec>0</baroDriftPaPerSec>
-    </plugin>
-    <plugin name='mavlink_interface' filename='libgazebo_mavlink_interface.so'>
-      <robotNamespace/>
-      <imuSubTopic>/imu</imuSubTopic>
-      <magSubTopic>/mag</magSubTopic>
-      <baroSubTopic>/baro</baroSubTopic>
-      <mavlink_addr>INADDR_ANY</mavlink_addr>
-      <mavlink_tcp_port>4560</mavlink_tcp_port>
-      <mavlink_udp_port>14560</mavlink_udp_port>
-      <serialEnabled>false</serialEnabled>
-      <serialDevice>/dev/ttyACM0</serialDevice>
-      <baudRate>921600</baudRate>
-      <qgc_addr>INADDR_ANY</qgc_addr>
-      <qgc_udp_port>14550</qgc_udp_port>
-      <sdk_addr>INADDR_ANY</sdk_addr>
-      <sdk_udp_port>14540</sdk_udp_port>
-      <hil_mode>false</hil_mode>
-      <hil_state_level>0</hil_state_level>
-      <send_vision_estimation>0</send_vision_estimation>
-      <send_odometry>1</send_odometry>
-      <enable_lockstep>1</enable_lockstep>
-      <use_tcp>1</use_tcp>
-      <motorSpeedCommandPubTopic>/gazebo/command/motor_speed</motorSpeedCommandPubTopic>
-      <control_channels>
-        <channel name='rotor1'>
-          <input_index>0</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>1000</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>100</zero_position_armed>
-          <joint_control_type>velocity</joint_control_type>
-        </channel>
-        <channel name='rotor2'>
-          <input_index>1</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>1000</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>100</zero_position_armed>
-          <joint_control_type>velocity</joint_control_type>
-        </channel>
-        <channel name='rotor3'>
-          <input_index>2</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>1000</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>100</zero_position_armed>
-          <joint_control_type>velocity</joint_control_type>
-        </channel>
-        <channel name='rotor4'>
-          <input_index>3</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>1000</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>100</zero_position_armed>
-          <joint_control_type>velocity</joint_control_type>
-        </channel>
-        <channel name='rotor5'>
-          <input_index>4</input_index>
-          <input_offset>1</input_offset>
-          <input_scaling>324.6</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>0</zero_position_armed>
-          <joint_control_type>velocity</joint_control_type>
-          <joint_control_pid>
-            <p>0.1</p>
-            <i>0</i>
-            <d>0</d>
-            <iMax>0.0</iMax>
-            <iMin>0.0</iMin>
-            <cmdMax>2</cmdMax>
-            <cmdMin>-2</cmdMin>
-          </joint_control_pid>
-          <joint_name>zephyr_delta_wing::propeller_joint</joint_name>
-        </channel>
-        <channel name='rotor6'>
-          <input_index>5</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>0.524</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>0</zero_position_armed>
-          <joint_control_type>position</joint_control_type>
-          <joint_name>zephyr_delta_wing::flap_left_joint</joint_name>
-          <joint_control_pid>
-            <p>10.0</p>
-            <i>0</i>
-            <d>0</d>
-            <iMax>0</iMax>
-            <iMin>0</iMin>
-            <cmdMax>20</cmdMax>
-            <cmdMin>-20</cmdMin>
-          </joint_control_pid>
-        </channel>
-        <channel name='rotor7'>
-          <input_index>6</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>0.524</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>0</zero_position_armed>
-          <joint_control_type>position</joint_control_type>
-          <joint_name>zephyr_delta_wing::flap_right_joint</joint_name>
-          <joint_control_pid>
-            <p>10.0</p>
-            <i>0</i>
-            <d>0</d>
-            <iMax>0</iMax>
-            <iMin>0</iMin>
-            <cmdMax>20</cmdMax>
-            <cmdMin>-20</cmdMin>
-          </joint_control_pid>
-        </channel>
-        <channel name='rotor8'>
-          <input_index>7</input_index>
-          <input_offset>0</input_offset>
-          <input_scaling>0.524</input_scaling>
-          <zero_position_disarmed>0</zero_position_disarmed>
-          <zero_position_armed>0</zero_position_armed>
-          <joint_control_type>position</joint_control_type>
-        </channel>
-      </control_channels>
-    </plugin>
-    <static>0</static>
-    <plugin name='rotors_gazebo_imu_plugin' filename='libgazebo_imu_plugin.so'>
-      <robotNamespace/>
-      <linkName>/imu_link</linkName>
-      <imuTopic>/imu</imuTopic>
-      <gyroscopeNoiseDensity>0.00018665</gyroscopeNoiseDensity>
-      <gyroscopeRandomWalk>3.8785e-05</gyroscopeRandomWalk>
-      <gyroscopeBiasCorrelationTime>1000.0</gyroscopeBiasCorrelationTime>
-      <gyroscopeTurnOnBiasSigma>0.0087</gyroscopeTurnOnBiasSigma>
-      <accelerometerNoiseDensity>0.00186</accelerometerNoiseDensity>
-      <accelerometerRandomWalk>0.006</accelerometerRandomWalk>
-      <accelerometerBiasCorrelationTime>300.0</accelerometerBiasCorrelationTime>
-      <accelerometerTurnOnBiasSigma>0.196</accelerometerTurnOnBiasSigma>
-    </plugin>
-  </gazebo>
-
-</robot>
--- a/clover_description/urdf/clover/clover4_physics.xacro
+++ b/clover_description/urdf/clover/clover4_physics.xacro
@@ -6,7 +6,7 @@

 -->

-<robot name="clover" xmlns:xacro="http://ros.org/wiki/xacro">
+<robot name="iris" xmlns:xacro="http://ros.org/wiki/xacro">
  <!-- Properties -->
  <xacro:property name="namespace" value="" />
  <xacro:property name="rotor_velocity_slowdown_sim" value="10" />
@@ -84,7 +84,7 @@
  </xacro:unless>

  <!-- Included URDF Files -->
-  <xacro:include filename="clover4_macros.xacro" />
+  <xacro:include filename="$(find clover_description)/urdf/clover/clover4_macros.xacro" />

  <!-- Instantiate multirotor_base_macro once -->
  <xacro:clover4_base_macro
--- a/clover_description/urdf/sensors/distance_sensor.urdf.xacro
+++ b/clover_description/urdf/sensors/distance_sensor.urdf.xacro
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <robot name="rpi_camera" xmlns:xacro="http://ros.org/wiki/xacro">
-  <xacro:include filename="../camera_sensor.urdf.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/camera_sensor.urdf.xacro"/>

  <xacro:macro name="distance_sensor" params="name:=lidar_vl53l1x parent x:=0 y:=0 z:=0 roll:=0 pitch:=0 yaw:=0 range_min:=0.01 range_max:=4.0 resolution:=0.01 rate:=10">
    <joint name="${name}_joint" type="fixed">
--- a/clover_description/urdf/sensors/pinhole_camera.urdf.xacro
+++ b/clover_description/urdf/sensors/pinhole_camera.urdf.xacro
@@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <robot name="pinhole_camera" xmlns:xacro="http://ros.org/wiki/xacro">
-  <xacro:include filename="../camera_sensor.urdf.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/camera_sensor.urdf.xacro"/>
  <xacro:camera_sensor name="main_camera" width="640" height="480" rate="30" horizontal_fov="${120.0*pi/180.0}"/>
 </robot>
--- a/clover_description/urdf/sensors/rpi_cam.urdf.xacro
+++ b/clover_description/urdf/sensors/rpi_cam.urdf.xacro
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <robot name="rpi_camera" xmlns:xacro="http://ros.org/wiki/xacro">
-  <xacro:include filename="../camera_sensor.urdf.xacro"/>
+  <xacro:include filename="$(find clover_description)/urdf/camera_sensor.urdf.xacro"/>

  <xacro:macro name="rpi_cam" params="name:=rpi_cam parent x:=0 y:=0 z:=0 roll:=0 pitch:=0 yaw:=0 width:=320 height:=240 rate:=40 do_throttling:=false">
    <joint name="${name}_joint" type="fixed">
--- a/clover_simulation/CMakeLists.txt
+++ b/clover_simulation/CMakeLists.txt
@@ -52,7 +52,7 @@ target_compile_options(throttling_camera PRIVATE -std=c++11)
 add_dependencies(throttling_camera ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS})

 install(DIRECTORY launch DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
-install(DIRECTORY models DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
+install(DIRECTORY meshes DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})
 install(DIRECTORY resources DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION})

 catkin_install_python(PROGRAMS scripts/aruco_gen
--- a/clover_simulation/README.md
+++ b/clover_simulation/README.md
@@ -55,7 +55,7 @@ A visual Gazebo plugin is used for the LED strip. An example of the plugin usage
 The plugin accepts the following parameters during instantiation:

 * `robotNamespace` (*string*, default: "") - a ROS namespace for the plugin;
-* `ledCount` (*integer*, required) - total number of LEDs in a strip.
+* `ledCount` (*integer*, required) - total numer of LEDs in a strip.

 The plugin will provide the following service:

--- a/clover_simulation/airframes/4500_clover
+++ b/clover_simulation/airframes/4500_clover
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# @name COEX Clover Simulator
-#
-# @type Quadrotor X
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris # base on iris
-
-param set ATT_W_EXT_HDG 0.5
-param set ATT_EXT_HDG_M 1
-
-param set COM_DISARM_LAND 1.0
-
-param set LPE_FLW_SCALE 1.0
-param set LPE_FLW_R 0.2
-param set LPE_FLW_RR 0.0
-param set LPE_FLW_QMIN 10
-param set LPE_VIS_DELAY 0.0
-param set LPE_VIS_Z 0.1
-param set LPE_FUSION 86
-
-param set SENS_FLOW_ROT 0
-param set SENS_FLOW_MINHGT 0.01
-param set SENS_FLOW_MAXHGT 4.0
-param set SENS_FLOW_MAXR 10.0
-
-param set EKF2_AID_MASK 27 # gps + flow + vis pos + vis yaw
-param set EKF2_OF_DELAY 0
-param set EKF2_OF_QMIN 10
-param set EKF2_OF_N_MIN 0.05
-param set EKF2_OF_N_MAX 0.2
-param set EKF2_HGT_MODE 2
-param set EKF2_EVA_NOISE 0.1
-param set EKF2_EVP_NOISE 0.1
-param set EKF2_EV_DELAY 0
--- a/clover_simulation/launch/simulator.launch
+++ b/clover_simulation/launch/simulator.launch
@@ -8,13 +8,12 @@
    <arg name="led" default="true"/> <!-- Simulated LED strip, ws281x-like -->
    <arg name="gps" default="false"/> <!--Simulated GPS module -->
    <arg name="use_clover_physics" default="false"/> <!-- Use inertial parameters from CAD models -->
-    <arg name="gui" default="true"/> <!-- Run Gazebo with GUI -->

    <!-- Gazebo instance -->
    <include file="$(find gazebo_ros)/launch/empty_world.launch" if="$(eval type == 'gazebo')">
        <!-- Workaround for crashes in VMware -->
        <env name="SVGA_VGPU10" value="0"/>
-        <arg name="gui" value="$(arg gui)"/>
+        <arg name="gui" value="true"/>
        <arg name="world_name" value="$(find clover_simulation)/resources/worlds/clover_aruco.world"/>
        <arg name="verbose" value="true"/>
    </include>
@@ -34,9 +33,7 @@
        <arg name="use_clover_physics" value="$(arg use_clover_physics)"/>
    </include>

-    <node name="jmavsim" pkg="px4" type="jmavsim_run.sh" output="screen" if="$(eval type == 'jmavsim')">
-        <env name="HEADLESS" value="1" if="$(eval not gui)"/>
-    </node>
+    <node name="jmavsim" pkg="px4" type="jmavsim_run.sh" output="screen" if="$(eval type == 'jmavsim')"/>

    <param name="use_sim_time" value="false" if="$(eval type == 'jmavsim')"/>

@@ -46,10 +43,10 @@
        <arg name="fcu_conn" value="sitl"/>
        <arg name="fcu_ip" value="127.0.0.1"/>
        <arg name="gcs_bridge" value=""/>
+        <arg name="rc" default="false"/>
        <arg name="web_video_server" default="false" if="$(eval type == 'jmavsim')"/>
        <arg name="main_camera" default="false" if="$(eval type == 'jmavsim')"/>
        <arg name="aruco" default="false" if="$(eval type == 'jmavsim')"/>
-        <arg name="optical_flow" default="false" if="$(eval type == 'jmavsim')"/>
        <arg name="led" default="false" if="$(eval type == 'jmavsim')"/>
    </include>
 </launch>
--- a/clover_simulation/src/clover_simulation/init.py
+++ b/clover_simulation/src/clover_simulation/init.py
@@ -88,6 +88,6 @@ def aruco_gen():
                    off_x + marker.x, off_y + marker.y, off_z + marker.z,
                    marker.roll, marker.pitch, marker.yaw)

-        output = open(source_world, 'wb') if inplace else stdout
+        output = open(source_world, 'w') if inplace else stdout

        save_world(world_tree, output)
--- a/clover_simulation/src/clover_simulation/world.py
+++ b/clover_simulation/src/clover_simulation/world.py
@@ -41,4 +41,4 @@ def save_world(world, file):
    '''
    Save the world to file-like object
    '''
-    return world.write(file, encoding='unicode')
+    return world.write(file)
--- a/docs/assets/clover42-main-margin.png
+++ b/docs/assets/clover42-main-margin.png
--- a/docs/assets/coex_pix/coexpix-bottom-rev1.2.png
+++ b/docs/assets/coex_pix/coexpix-bottom-rev1.2.png
--- a/docs/assets/copterhack2022.svg
+++ b/docs/assets/copterhack2022.svg
@@ -1,43 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Generator: Adobe Illustrator 23.0.1, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
-<svg version="1.1" id="Слой_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
-	 viewBox="0 0 566.93 226.77" style="enable-background:new 0 0 566.93 226.77;" xml:space="preserve">
-<style type="text/css">
-	.st0{fill:#3679BC;}
-	.st1{fill:#27B4AA;}
-</style>
-<g>
-	<polygon class="st0" points="356.5,37.35 287.97,37.35 287.97,56.03 312.9,56.03 312.9,105.92 331.58,105.92 331.58,56.03 
-		356.5,56.03 	"/>
-	<polygon class="st0" points="434.54,56.03 434.54,37.35 366,37.35 366,37.39 365.97,37.39 365.97,105.92 366,105.92 384.65,105.92 
-		434.54,105.92 434.54,87.24 384.65,87.24 384.65,80.99 415.89,80.99 415.89,62.31 384.65,62.31 384.65,56.03 	"/>
-	<polygon class="st0" points="356.55,134.06 356.52,120.82 343.35,120.86 318.39,145.81 306.6,145.81 306.6,120.86 287.92,120.86 
-		287.92,189.39 306.6,189.39 306.6,164.49 318.45,164.49 343.35,189.39 356.52,189.42 356.55,176.18 335.5,155.12 	"/>
-	<path class="st0" d="M88.62,56.3h34.3V37.35h-34.3c-18.94,0-34.3,15.36-34.3,34.3s15.36,34.3,34.3,34.3h34.3V87h-34.3
-		c-8.48,0-15.35-6.87-15.35-15.35C73.28,63.17,80.15,56.3,88.62,56.3z"/>
-	<path class="st0" d="M181.76,155.12v34.3h18.95v-34.3c0-18.94-15.36-34.3-34.3-34.3s-34.3,15.36-34.3,34.3v34.3h18.95v-34.3
-		c0-8.48,6.87-15.35,15.35-15.35C174.89,139.78,181.76,146.65,181.76,155.12z"/>
-	<path class="st0" d="M244.21,139.78h34.3v-18.95h-34.3c-18.94,0-34.3,15.36-34.3,34.3s15.36,34.3,34.3,34.3h34.3v-18.95h-34.3
-		c-8.48,0-15.35-6.87-15.35-15.35C228.86,146.65,235.73,139.78,244.21,139.78z"/>
-	<polygon class="st0" points="104.15,120.82 104.15,145.55 73.46,145.55 73.46,120.82 54.32,120.82 54.32,189.42 73.46,189.42 
-		73.46,164.69 104.15,164.69 104.15,189.42 122.92,189.42 122.92,120.82 	"/>
-	<path class="st1" d="M453.24,145.34c-0.23-13.68-11.67-24.52-25.35-24.52h-24.53v18.68h24.77c3.37,0,6.27,2.59,6.43,5.96
-		c0.17,3.6-2.7,6.56-6.25,6.56h-6.26c-10.32,0-18.68,8.36-18.68,18.68v0v18.65h49.88v-18.65H428.3
-		C442.22,170.71,453.47,159.31,453.24,145.34z"/>
-	<path class="st1" d="M512.59,145.34c-0.23-13.68-11.67-24.52-25.35-24.52h-24.53v18.68h24.77c3.37,0,6.27,2.59,6.43,5.96
-		c0.17,3.6-2.7,6.56-6.25,6.56h-6.26c-10.32,0-18.68,8.36-18.68,18.68v0v18.65h49.88v-18.65h-24.94
-		C501.57,170.71,512.82,159.31,512.59,145.34z"/>
-	<path class="st0" d="M200.29,66.27c-2.97-18.71-20.55-31.47-39.25-28.49c-18.71,2.97-31.47,20.55-28.49,39.25
-		c2.97,18.71,20.55,31.47,39.25,28.49C190.5,102.56,203.26,84.98,200.29,66.27z M166.42,87c-8.48,0-15.35-6.87-15.35-15.35
-		c0-8.48,6.87-15.35,15.35-15.35c8.48,0,15.35,6.87,15.35,15.35C181.76,80.13,174.89,87,166.42,87z"/>
-	
-		<rect x="375.22" y="120.82" transform="matrix(-1 -1.224647e-16 1.224647e-16 -1 769.1138 266.6382)" class="st1" width="18.68" height="24.99"/>
-	<path class="st0" d="M253.7,37.39v-0.04h-33.19v0.04h-10.61v68.53h18.68V87h25.11c13.7,0,24.81-11.11,24.81-24.81
-		C278.51,48.49,267.4,37.39,253.7,37.39z M250.69,71.46h-22.1V53.17h22.1v0.01c5.05,0,9.14,4.09,9.14,9.14
-		C259.83,67.37,255.74,71.46,250.69,71.46z"/>
-	<path class="st0" d="M512.61,62.19c0-13.7-11.11-24.81-24.81-24.81v-0.04h-33.19v0.01h-10.61v68.6h18.68V87h17.79l18.92,18.92
-		l13.17,0.03l0.04-13.24l-10.36-10.36C508.52,77.85,512.61,70.5,512.61,62.19z M484.79,71.46
-		C484.79,71.46,484.79,71.46,484.79,71.46h-22.1V53.17h22.1v0.01c0,0,0,0,0,0c5.05,0,9.14,4.09,9.14,9.14
-		C493.92,67.37,489.83,71.46,484.79,71.46z"/>
-</g>
-</svg>
--- a/docs/assets/duocam/duocam_connections.jpg
+++ b/docs/assets/duocam/duocam_connections.jpg
--- a/docs/assets/duocam/image_topics.png
+++ b/docs/assets/duocam/image_topics.png
--- a/docs/assets/duocam/qgc_rtsp_settings.png
+++ b/docs/assets/duocam/qgc_rtsp_settings.png
--- a/docs/assets/dxf/4.2/big_leg.dxf
+++ b/docs/assets/dxf/4.2/big_leg.dxf
--- a/docs/assets/dxf/4.2/deck_mount.dxf
+++ b/docs/assets/dxf/4.2/deck_mount.dxf
--- a/docs/assets/dxf/4.2/deck_mount_small.dxf
+++ b/docs/assets/dxf/4.2/deck_mount_small.dxf
--- a/docs/assets/dxf/4.2/grab_deck.dxf
+++ b/docs/assets/dxf/4.2/grab_deck.dxf
--- a/docs/assets/dxf/4.2/grip_spacer.png
+++ b/docs/assets/dxf/4.2/grip_spacer.png
--- a/docs/assets/dxf/4.2/led_mount_plate.dxf
+++ b/docs/assets/dxf/4.2/led_mount_plate.dxf
--- a/docs/assets/dxf/4.2/prop_guard.dxf
+++ b/docs/assets/dxf/4.2/prop_guard.dxf
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Oleg Kalachev	efaddd34c8	image: enable USB in Compute Module 4	2021-04-02 10:35:49 +03:00
Oleg Kalachev	5d29453ae0	image: build rtl8812au wi-fi driver	2021-04-02 02:31:34 +03:00