image: add some todo

builder/assets/hardware_setup.sh

@@ -79,4 +79,10 @@ if ! grep -q "^bcm2835-v4l2" /etc/modules;
 then printf "bcm2835-v4l2\n" >> /etc/modules
 fi
 
-echo_stamp "#8 End of configure hardware interfaces"
+echo_stamp "#8 Check if Compute Module 4"
+if grep -q "Compute Module 4" "/proc/device-tree/model"; then
+  echo_stamp "Enable USB on Compute Module 4"
+  echo "dtoverlay=dwc2,dr_mode=host" >> /boot/config.txt
+fi
+
+echo_stamp "#9 End of configure hardware interfaces"

builder/image-network.sh

@@ -60,4 +60,25 @@ domain-needed
 quiet-dhcp6
 EOF
 
-echo_stamp "#4 End of network installation"
+echo_stamp "#4 Build the RTL8814AU Wi-Fi adapter driver"
+wget http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel-headers_1.20210108-1_armhf.deb
+dpkg -i raspberrypi-kernel-headers_1.20210108-1_armhf.deb
+cd /home/pi
+git clone https://github.com/aircrack-ng/rtl8812au.git --depth=1
+cd rtl8812au
+echo kernel version: $(uname -r)
+echo kernel version from procfs: $(cat /proc/version)
+echo version: $(git describe --tags --always)
+sed -i 's/CONFIG_PLATFORM_I386_PC = y/CONFIG_PLATFORM_I386_PC = n/g' Makefile # https://github.com/aircrack-ng/rtl8812au#for-raspberry-rpi
+sed -i 's/CONFIG_PLATFORM_ARM_RPI = n/CONFIG_PLATFORM_ARM_RPI = y/g' Makefile
+# sed -i 's/CONFIG_PLATFORM_ARM64_RPI = n/CONFIG_PLATFORM_ARM64_RPI = y/g' Makefile
+apt-cache policy raspberrypi-kernel-headers
+# apt-get install -y raspberrypi-kernel-headers=1.20210108 dkms
+apt-get install -y dkms
+ls /lib/modules
+echo make
+make KERNEL_VER=5.4.83-v7l+ KVER=5.4.83-v7l+ # TODO: determine kernel version from fs
+echo make install
+make install KERNEL_VER=5.4.83-v7l+ KVER=5.4.83-v7l+
+
+echo_stamp "#5 End of network installation"

docs/en/models.md

@@ -96,16 +96,6 @@ This page contains models and drawings of some of the drone parts. They can be u
         </td>
         <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/big_leg.dxf"><code>big_leg.dxf</code></a></td>
     </tr>
-    <tr>
-        <td><img src="../assets/dxf/4.2/grip_spacer.png"></td>
-        <td>
-            <b>Grip spacer</b>.<br>
-            Function: spacer for the gripper plates.<br>
-            Material: monolithic polycarbonate 2mm.<br>
-            Quantity: 1 pcs.
-        </td>
-        <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/grip_spacer.dxf"><code>grip_spacer.dxf</code></a></td>
-    </tr>
 </table>
 
 ## Clover 4

docs/ru/models.md

@@ -96,16 +96,6 @@
         </td>
         <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/big_leg.dxf"><code>big_leg.dxf</code></a></td>
     </tr>
-    <tr>
-        <td><img src="../assets/dxf/4.2/grip_spacer.png"></td>
-        <td>
-            <b>Проставка для захвата</b>.<br>
-            Функция: Опорный элемент для механического захвата.<br>
-            Материал: Монолитный поликарбонат 2мм.<br>
-            Количество: 1 шт.
-        </td>
-        <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/grip_spacer.dxf"><code>grip_spacer.dxf</code></a></td>
-    </tr>
 </table>
 
 ## Клевер 4