docs: publish grip spacer dxf

The previous method replaced all the dtoverlay variables to pi3-disable-bt, which is incorrect

builder/assets/hardware_setup.sh

@@ -65,7 +65,7 @@ echo_stamp "#6 Turn on UART"
 # https://github.com/RPi-Distro/raspi-config/pull/75
 /usr/bin/raspi-config nonint do_serial 1
 /usr/bin/raspi-config nonint set_config_var enable_uart 1 /boot/config.txt
-/usr/bin/raspi-config nonint set_config_var dtoverlay pi3-disable-bt /boot/config.txt
+echo dtoverlay=pi3-disable-bt >> /boot/config.txt
 systemctl disable hciuart.service
 
 # After adding to Raspbian OS

builder/image-ros.sh

@@ -76,9 +76,11 @@ my_travis_retry sudo -u pi rosdep update
 
 export ROS_IP='127.0.0.1' # needed for running tests
 
-echo_stamp "Reconfiguring Clover repository for simplier unshallowing"
-cd /home/pi/catkin_ws/src/clover
-git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*"
+# echo_stamp "Reconfiguring Clover repository for simplier unshallowing" # TODO: bring back
+# cd /home/pi/catkin_ws/src/clover
+# git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*"
+echo_stamp "Remove .git from Clover to reduce the size"
+rm -rf /home/pi/catkin_ws/src/clover/.git # TODO: remove
 
 echo_stamp "Build and install Clover"
 cd /home/pi/catkin_ws
@@ -101,7 +103,6 @@ cd /home/pi/catkin_ws/src/clover
 NPM_CONFIG_UNSAFE_PERM=true npm install gitbook-cli -g
 NPM_CONFIG_UNSAFE_PERM=true gitbook install
 gitbook build
-rm -rf _book/assets/ && ln -s ../docs/assets/ _book/assets # replace assets with a symlink to reduce image size
 touch node_modules/CATKIN_IGNORE docs/CATKIN_IGNORE _book/CATKIN_IGNORE clover/www/CATKIN_IGNORE apps/CATKIN_IGNORE # ignore documentation files by catkin
 
 echo_stamp "Installing additional ROS packages"

builder/image-software.sh

@@ -95,6 +95,7 @@ lsof \
 git \
 dnsmasq  \
 tmux \
+tree \
 vim \
 libjpeg8 \
 tcpdump \

builder/test/tests.sh

@@ -43,6 +43,8 @@ rosversion aruco_pose
 rosversion vl53l1x
 rosversion mavros
 rosversion mavros_extras
+rosversion ws281x
+rosversion led_msgs
 rosversion dynamic_reconfigure
 rosversion tf2_web_republisher
 rosversion compressed_image_transport

docs/en/models.md

@@ -96,6 +96,16 @@ This page contains models and drawings of some of the drone parts. They can be u
         </td>
         <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/big_leg.dxf"><code>big_leg.dxf</code></a></td>
     </tr>
+    <tr>
+        <td><img src="../assets/dxf/4.2/grip_spacer.png"></td>
+        <td>
+            <b>Grip spacer</b>.<br>
+            Function: spacer for the gripper plates.<br>
+            Material: monolithic polycarbonate 2mm.<br>
+            Quantity: 1 pcs.
+        </td>
+        <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/grip_spacer.dxf"><code>grip_spacer.dxf</code></a></td>
+    </tr>
 </table>
 
 ## Clover 4

docs/ru/models.md

@@ -96,6 +96,16 @@
         </td>
         <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/big_leg.dxf"><code>big_leg.dxf</code></a></td>
     </tr>
+    <tr>
+        <td><img src="../assets/dxf/4.2/grip_spacer.png"></td>
+        <td>
+            <b>Проставка для захвата</b>.<br>
+            Функция: Опорный элемент для механического захвата.<br>
+            Материал: Монолитный поликарбонат 2мм.<br>
+            Количество: 1 шт.
+        </td>
+        <td><a href="https://github.com/CopterExpress/clover/raw/master/docs/assets/dxf/4.2/grip_spacer.dxf"><code>grip_spacer.dxf</code></a></td>
+    </tr>
 </table>
 
 ## Клевер 4