mirror of
https://github.com/CopterExpress/clover.git
synced 2026-05-26 21:19:35 +00:00
2b50b9bd8c
Co-authored-by: sfalexrog <sfalexrog@gmail.com> * Rework the structure. * Add Clever 4 assembling instruction. * Rework setup articles. * Many additional changes.
1.2 KiB
1.2 KiB
Power setup
Open the Vehicle Setup tab and select the Power menu.
Calibrating the power sensor
Note
Power sensor calibration should be done with the battery pack connected to the drone.
- Set the Number of cells parameter according to the number of cells in your battery (3 for the Clever 4 drone).
- Calculate the voltage divider:
- Measure voltage across the battery (you may use a battery voltage tester for that).
- Press the Calculate button next to the Voltage divider label.
- Put the battery voltage into the prompt and click Calculate.
- Press Close to save the calculated value.
Further reading: https://docs.qgroundcontrol.com/en/SetupView/Power.html.
ESC calibration
Warning
Never attempt ESC calibration with propellers on! In some cases the motors will start spinning with maximum speed.
- Make sure the battery is disconnected and the propellers are not mounted.
- Press Calibrate.
- Connect the battery when prompted.
- Wait for the Calibration complete.
Further reading: https://docs.px4.io/v1.9.0/en/advanced_config/esc_calibration.html.