Try not to install espeak to reduce size

README.md

@@ -1,6 +1,6 @@
 # clover🍀: create autonomous drones easily
 
-<img src="docs/assets/clover42-main.png" align="right" width="400px" alt="COEX Clover Drone">
+<img src="docs/assets/clever4-front-white.png" align="right" width="400px" alt="COEX Clover Drone">
 
 Clover is an open source [ROS](https://www.ros.org)-based framework, providing user-friendly tools to control [PX4](https://px4.io)-powered drones. Clover is available as a ROS package, but is shipped mainly as a preconfigured image for Raspberry Pi. Once you've installed Raspberry Pi on your drone and flashed the image to its microSD card, taking the drone up in the air is a matter of minutes.
 

aruco_pose/CHANGELOG.rst

@@ -1,8 +0,0 @@
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Changelog for package aruco_pose
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-0.21.1 (2020-11-17)
--------------------
-* First release of aruco_pose package to ROS
-* Contributors: Alamoris, Alexey Rogachevskiy, Arthur Golubtsov, Ilya Petrov, Oleg Kalachev

aruco_pose/cfg/DetectorParams.cfg

@@ -8,8 +8,6 @@ p = cv2.aruco.DetectorParameters_create()
 
 gen = ParameterGenerator()
 
-gen.add("enabled", bool_t, 0, "if detection enabled", True)
-
 gen.add("adaptiveThreshConstant",                 double_t, 0,
         "Constant for adaptive thresholding before finding contours",
          p.adaptiveThreshConstant, 0, 100)

aruco_pose/package.xml

@@ -1,7 +1,7 @@
 <?xml version="1.0"?>
 <package format="2">
   <name>aruco_pose</name>
-  <version>0.21.1</version>
+  <version>0.0.1</version>
   <description>Positioning with ArUco markers</description>
 
   <maintainer email="okalachev@gmail.com">Oleg Kalachev</maintainer>

aruco_pose/src/aruco_detect.cpp

@@ -62,7 +62,6 @@ private:
 	std::unique_ptr<tf2_ros::Buffer> tf_buffer_;
 	std::unique_ptr<tf2_ros::TransformListener> tf_listener_;
 	std::shared_ptr<dynamic_reconfigure::Server<aruco_pose::DetectorConfig>> dyn_srv_;
-	bool enabled_ = true;
 	cv::Ptr<cv::aruco::Dictionary> dictionary_;
 	cv::Ptr<cv::aruco::DetectorParameters> parameters_;
 	image_transport::Publisher debug_pub_;
@@ -129,8 +128,6 @@ public:
 private:
 	void imageCallback(const sensor_msgs::ImageConstPtr& msg, const sensor_msgs::CameraInfoConstPtr &cinfo)
 	{
-		if (!enabled_) return;
-
 		Mat image = cv_bridge::toCvShare(msg, "bgr8")->image;
 
 		vector<int> ids;
@@ -359,7 +356,6 @@ private:
 
 	void paramCallback(aruco_pose::DetectorConfig &config, uint32_t level)
 	{
-		enabled_ = config.enabled;
 		parameters_->adaptiveThreshConstant = config.adaptiveThreshConstant;
 		parameters_->adaptiveThreshWinSizeMin = config.adaptiveThreshWinSizeMin;
 		parameters_->adaptiveThreshWinSizeMax = config.adaptiveThreshWinSizeMax;

builder/assets/examples/flight_marker.py

@@ -1,4 +1,4 @@
-# Information: https://clover.coex.tech/aruco
+# Information: https://clover.coex.tech/en/aruco.html
 
 import rospy
 from clover import srv

builder/assets/examples/leds.py

@@ -1,4 +1,4 @@
-# Information: https://clover.coex.tech/led
+# Information: https://clover.coex.tech/en/leds.html
 
 import rospy
 from clover.srv import SetLEDEffect

builder/image-build.sh

@@ -15,7 +15,7 @@
 
 set -e # Exit immidiately on non-zero result
 
-SOURCE_IMAGE="https://downloads.raspberrypi.org/raspios_lite_armhf/images/raspios_lite_armhf-2021-01-12/2021-01-11-raspios-buster-armhf-lite.zip"
+SOURCE_IMAGE="https://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2020-02-14/2020-02-13-raspbian-buster-lite.zip"
 
 export DEBIAN_FRONTEND=${DEBIAN_FRONTEND:='noninteractive'}
 export LANG=${LANG:='C.UTF-8'}

builder/image-ros.sh

@@ -13,7 +13,7 @@
 # copies or substantial portions of the Software.
 #
 
-set -ex # Exit immidiately on non-zero result
+set -e # Exit immidiately on non-zero result
 
 REPO=$1
 REF=$2

builder/image-software.sh

@@ -82,9 +82,6 @@ apt-get update
 
 # Let's retry fetching those packages several times, just in case
 echo_stamp "Software installing"
-apt-cache policy cmake
-apt-cache policy cmake-data
-my_travis_retry apt-get install --no-install-recommends -y cmake-data=3.13.4-1 cmake=3.13.4-1
 my_travis_retry apt-get install --no-install-recommends -y \
 unzip \
 zip \
@@ -98,6 +95,7 @@ git \
 dnsmasq  \
 tmux \
 vim \
+cmake \
 libjpeg8 \
 tcpdump \
 ltrace \
@@ -125,11 +123,10 @@ sed -i "s/updates_available//" /usr/share/byobu/status/status
 
 echo_stamp "Installing pip"
 curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
-curl https://bootstrap.pypa.io/pip/2.7/get-pip.py -o get-pip2.py
 python3 get-pip.py
-python get-pip2.py
+python get-pip.py
-rm get-pip.py get-pip2.py
+rm get-pip.py
-my_travis_retry pip install --upgrade pip
+#my_travis_retry pip install --upgrade pip
 #my_travis_retry pip3 install --upgrade pip
 
 echo_stamp "Make sure both pip and pip3 are installed"
@@ -138,7 +135,6 @@ pip3 --version
 
 echo_stamp "Install and enable Butterfly (web terminal)"
 echo_stamp "Workaround for tornado >= 6.0 breaking butterfly"
-export CRYPTOGRAPHY_DONT_BUILD_RUST=1
 my_travis_retry pip3 install tornado==5.1.1
 my_travis_retry pip3 install butterfly
 my_travis_retry pip3 install butterfly[systemd]

builder/standalone-install.sh

@@ -5,7 +5,7 @@ set -e
 # Step 1: Install pip
 apt update
 apt install -y curl
-curl https://bootstrap.pypa.io/pip/2.7/get-pip.py -o get-pip.py
+curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
 python ./get-pip.py
 
 # Step 1.5: Add deb.coex.tech to apt

check_unused_assets.py

@@ -4,9 +4,7 @@ import os
 import sys
 import subprocess
 
-EXCLUDE = ('clever4-front-white.png', 'clever4-front-white-large.png', '.DS_Store',
+EXCLUDE = ('clever4-front-white.png', '.DS_Store', 'clever4-front-black-large.png')
-    'clever4-front-black-large.png','clover42-black.png')
-
 code = 0
 
 os.chdir('./docs')

clover/CHANGELOG.rst

@@ -1,8 +0,0 @@
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Changelog for package clover
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-0.21.1 (2020-11-17)
--------------------
-* First release of clover package to ROS
-* Contributors: Alexey Rogachevskiy, Arthur Golubtsov, Oleg Kalachev

clover/README.md

@@ -44,12 +44,16 @@ Alternatively you may change the `fcu_url` property in `mavros.launch` file to p
 
 ## Running
 
+To start connection to SITL, use:
+
+```bash
+roslaunch clover sitl.launch
+```
+
 To start connection to the flight controller, use:
 
 ```bash
 roslaunch clover clover.launch
 ```
 
-For the simulation information see the [corresponding article](https://clover.coex.tech/en/simulation.html).
-
 > Note that the package is configured to connect to `/dev/px4fmu` by default (see [previous section](#manual-installation)). Install udev rules or specify path to your FCU device in `mavros.launch`.

clover/launch/sitl.launch

@@ -0,0 +1,19 @@
+<launch>
+    <!-- clover configuration for testing in sitl -->
+    <arg name="ip" default="127.0.0.1"/>
+    <arg name="rosbridge" default="false"/>
+
+    <include file="$(find clover)/launch/clover.launch">
+        <arg name="fcu_conn" value="udp"/>
+        <arg name="fcu_ip" value="$(arg ip)"/>
+        <arg name="gcs_bridge" value="false"/>
+        <arg name="optical_flow" value="false"/>
+        <arg name="web_video_server" default="false"/>
+        <arg name="main_camera" default="false"/>
+        <arg name="rosbridge" value="$(arg rosbridge)"/>
+        <arg name="aruco" default="false"/>
+        <arg name="rangefinder_vl53l1x" default="false"/>
+        <arg name="led" default="false"/>
+        <arg name="rc" default="false"/>
+    </include>
+</launch>

clover/package.xml

@@ -1,7 +1,7 @@
 <?xml version="1.0"?>
 <package format="2">
   <name>clover</name>
-  <version>0.21.1</version>
+  <version>0.0.1</version>
   <description>The Clover package</description>
 
   <maintainer email="okalachev@gmail.com">Oleg Kalachev</maintainer>

clover/www/index.html

@@ -1,5 +1,3 @@
-<title>Clover Drone Kit Tools</title>
-
 <h1>Clover Drone Kit Tools</h1>
 
 <ul>

clover_blocks/CHANGELOG.rst

@@ -1,8 +0,0 @@
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Changelog for package clover_blocks
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-0.21.1 (2020-11-17)
--------------------
-* First release of clover_blocks package to ROS
-* Contributors: Oleg Kalachev

clover_blocks/package.xml

@@ -1,7 +1,7 @@
 <?xml version="1.0"?>
 <package format="2">
   <name>clover_blocks</name>
-  <version>0.21.1</version>
+  <version>0.0.0</version>
   <description>Blockly programming support for Clover</description>
   <maintainer email="okalachev@gmail.com">Oleg Kalachev</maintainer>
   <license>MIT</license>

clover_description/CHANGELOG.rst

@@ -1,9 +0,0 @@
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Changelog for package clover_description
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-0.21.1 (2020-11-17)
--------------------
-* First release of clover_description package to ROS
-* Contributors: Alexey Rogachevskiy
-

clover_description/package.xml

@@ -1,6 +1,6 @@
 <package format="2">
   <name>clover_description</name>
-  <version>0.21.1</version>
+  <version>0.0.1</version>
   <description>The clover_description package provides URDF models of the Clover series of quadcopters.</description>
 
   <maintainer email="sfalexrog@gmail.com">Alexey Rogachevskiy</maintainer>

clover_simulation/CHANGELOG.rst

@@ -1,8 +0,0 @@
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Changelog for package clover_simulation
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-0.21.1 (2020-11-17)
--------------------
-* First release of clover_simulation package to ROS
-* Contributors: Alexey Rogachevskiy

clover_simulation/launch/simulator.launch

@@ -1,5 +1,4 @@
 <launch>
-    <arg name="type" default="gazebo"/> <!-- gazebo, jmavsim, none (only clover packages) -->
     <arg name="mav_id" default="0"/>
     <arg name="est" default="ekf2"/> <!-- PX4 estimator: lpe, ekf2 -->
     <arg name="vehicle" default="clover"/> <!-- PX4 vehicle configuration: clover, clover_vpe -->
@@ -10,22 +9,22 @@
     <arg name="use_clover_physics" default="false"/> <!-- Use inertial parameters from CAD models -->
 
     <!-- Gazebo instance -->
-    <include file="$(find gazebo_ros)/launch/empty_world.launch" if="$(eval type == 'gazebo')">
+    <include file="$(find gazebo_ros)/launch/empty_world.launch">
         <!-- Workaround for crashes in VMware -->
         <env name="SVGA_VGPU10" value="0"/>
         <arg name="gui" value="true"/>
-        <arg name="world_name" value="$(find clover_simulation)/resources/worlds/clover_aruco.world"/>
+        <arg name="world_name" value="$(find clover_simulation)/resources/worlds/clover.world"/>
         <arg name="verbose" value="true"/>
     </include>
 
     <!-- PX4 instance -->
-    <node name="sitl_$(arg mav_id)" pkg="px4" type="px4" output="screen" args="$(find px4)/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -i $(arg mav_id)" unless="$(eval type == 'none')">
+    <node name="sitl_$(arg mav_id)" pkg="px4" type="px4" output="screen" args="$(find px4)/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -i $(arg mav_id)">
         <env name="PX4_SIM_MODEL" value="$(arg vehicle)"/>
         <env name="PX4_ESTIMATOR" value="$(arg est)"/>
     </node>
 
     <!-- Clover model -->
-    <include file="$(find clover_description)/launch/spawn_drone.launch" if="$(eval type == 'gazebo')">
+    <include file="$(find clover_description)/launch/spawn_drone.launch">
         <arg name="main_camera" value="$(arg main_camera)"/>
         <arg name="rangefinder" value="$(arg rangefinder)"/>
         <arg name="led" value="$(arg led)"/>
@@ -33,20 +32,10 @@
         <arg name="use_clover_physics" value="$(arg use_clover_physics)"/>
     </include>
 
-    <node name="jmavsim" pkg="px4" type="jmavsim_run.sh" output="screen" if="$(eval type == 'jmavsim')"/>
-
-    <param name="use_sim_time" value="false" if="$(eval type == 'jmavsim')"/>
-
     <!-- Clover services -->
     <include file="$(find clover)/launch/clover.launch">
         <arg name="simulator" value="true"/>
         <arg name="fcu_conn" value="sitl"/>
         <arg name="fcu_ip" value="127.0.0.1"/>
-        <arg name="gcs_bridge" value=""/>
-        <arg name="rc" default="false"/>
-        <arg name="web_video_server" default="false" if="$(eval type == 'jmavsim')"/>
-        <arg name="main_camera" default="false" if="$(eval type == 'jmavsim')"/>
-        <arg name="aruco" default="false" if="$(eval type == 'jmavsim')"/>
-        <arg name="led" default="false" if="$(eval type == 'jmavsim')"/>
     </include>
 </launch>